913 research outputs found

    CCD Readout Electronics for the Subaru Prime Focus Spectrograph

    Full text link
    We present details of the design for the CCD readout electronics for the Subaru Telescope Prime Focus Spectrograph (PFS). The spectrograph is comprised of four identical spectrograph modules, each collecting roughly 600 spectra. The spectrograph modules provide simultaneous wavelength coverage over the entire band from 380 nm to 1260 nm through the use of three separate optical channels: blue, red, and near infrared (NIR). A camera in each channel images the multi-object spectra onto a 4k x 4k, 15 um pixel, detector format. The two visible cameras use a pair of Hamamatsu 2k x 4k CCDs with readout provided by custom electronics, while the NIR camera uses a single Teledyne HgCdTe 4k x 4k detector and ASIC Sidecar to read the device. The CCD readout system is a custom design comprised of three electrical subsystems: the Back End Electronics (BEE), the Front End Electronics (FEE), and a Pre-amplifier. The BEE is an off-the-shelf PC104 computer, with an auxiliary Xilinx FPGA module. The computer serves as the main interface to the Subaru messaging hub and controls other peripheral devices associated with the camera, while the FPGA is used to generate the necessary clocks and transfer image data from the CCDs. The FEE board sets clock biases, substrate bias, and CDS offsets. It also monitors bias voltages, offset voltages, power rail voltage, substrate voltage and CCD temperature. The board translates LVDS clock signals to biased clocks and returns digitized analog data via LVDS. Monitoring and control messages are sent from the BEE to the FEE using a standard serial interface. The Pre-amplifier board resides behind the detectors and acts as an interface to the two Hamamatsu CCDs. The Pre-amplifier passes clocks and biases to the CCDs, and analog CCD data is buffered and amplified prior to being returned to the FEE.Comment: 14 pages, 15 figures, SPIE ATI 2014, Montrea

    Nanostructured Thermal Protection Systems for Space Exploration Missions

    Get PDF
    Strong research and development programs in nanotechnology and Thermal Protection Systems (TPS) exist at NASA Ames. Conceptual studies have been undertaken to determine if new, nanostructured materials (composites of existing TPS materials and nanostructured composite fibers) could improve the performance of TPS. To this end, we have studied various candidate heatshields, some composed of existing TPS materials (with known material properties), to provide a baseline for comparison with others that are admixtures of such materials and a nanostructured material. In the latter case, some assumptions were made about the thermal conductivity and strength of the admixture, relative to the baseline TPS material. For the purposes of this study, we have made the conservative assumption that only a small fraction of the remarkable properties of carbon nanotubes (for example) will be realized in the material properties of the admixtures employing them. The heatshields studied included those for Sharp leading edges (appropriate to out-of-orbit entry and aero-maneuvering), probes, an out-of-orbit Apollo Command Module (as a surrogate for NASA's new Crew Exploration Vehicle [CEV]), a Mars Sample Return Vehicle and a large heat shield for Mars aerocapture missions. We report on these conceptual studies, which show that in some cases (not all), significant improvements in the TPS can be achieved through the use of nanostructured materials

    THE DETERMINATION OF SOLUBLE CARBOHYDRATES

    Full text link

    THE DETERMINATION OF NITROGEN IN RELATIVELY SIMPLE COMPOUNDS

    Full text link

    Combining Path Integration and Remembered Landmarks When Navigating without Vision

    Get PDF
    This study investigated the interaction between remembered landmark and path integration strategies for estimating current location when walking in an environment without vision. We asked whether observers navigating without vision only rely on path integration information to judge their location, or whether remembered landmarks also influence judgments. Participants estimated their location in a hallway after viewing a target (remembered landmark cue) and then walking blindfolded to the same or a conflicting location (path integration cue). We found that participants averaged remembered landmark and path integration information when they judged that both sources provided congruent information about location, which resulted in more precise estimates compared to estimates made with only path integration. In conclusion, humans integrate remembered landmarks and path integration in a gated fashion, dependent on the congruency of the information. Humans can flexibly combine information about remembered landmarks with path integration cues while navigating without visual information.National Institutes of Health (U.S.) (Grant T32 HD007151)National Institutes of Health (U.S.) (Grant T32 EY07133)National Institutes of Health (U.S.) (Grant F32EY019622)National Institutes of Health (U.S.) (Grant EY02857)National Institutes of Health (U.S.) (Grant EY017835-01)National Institutes of Health (U.S.) (Grant EY015616-03)United States. Department of Education (H133A011903

    Managing Coastal Resources In The 21St Century

    Get PDF
    Coastal ecosystems are increasingly dominated by humans. Consequently, the human dimensions of sustainability science have become an integral part of emerging coastal governance and management practices. But if we are to avoid the harsh lessons of land management, coastal decision makers must recognize that humans are one of the more coastally dependent species in the biosphere. Management responses must therefore confront both the temporal urgency and the very real compromises and sacrifices that will be necessary to achieve a sustainable coastal ecosystem, one that is economically feasible, socially just, and ecologically sound

    Representing 3D Space in Working Memory: Spatial Images from Vision, Hearing, Touch, and Language

    Get PDF
    The chapter deals with a form of transient spatial representation referred to as a spatial image. Like a percept, it is externalized, scaled to the environment, and can appear in any direction about the observer. It transcends the concept of modality, as it can be based on inputs from the three spatial senses, from language, and from long-term memory. Evidence is presented that supports each of the claimed properties of the spatial image, showing that it is quite different from a visual image. Much of the evidence presented is based on spatial updating. A major concern is whether spatial images from different input modalities are functionally equivalent— that once instantiated in working memory, the spatial images from different modalities have the same functional characteristics with respect to subsequent processing, such as that involved in spatial updating. Going further, the research provides some evidence that spatial images are amodal (i.e., do not retain modality-specific features)

    Measurement of the lepton charge asymmetry in W-boson decays produced in p-pbar collisions

    Full text link
    We describe a measurement of the charge asymmetry of leptons from W boson decays in the rapidity range 0 enu, munu events from 110+/-7 pb^{-1}of data collected by the CDF detector during 1992-95. The asymmetry data constrain the ratio of d and u quark momentum distributions in the proton over the x range of 0.006 to 0.34 at Q2 \approx M_W^2. The asymmetry predictions that use parton distribution functions obtained from previously published CDF data in the central rapidity region (0.0<|y_l|<1.1) do not agree with the new data in the large rapidity region (|y_l|>1.1).Comment: 13 pages, 3 tables, 1 figur
    • …
    corecore