Research and development of an optimized laboratory speech-compression system for spacecraft application. Task 7- Microminiaturization study

Microminiaturization of optimized laboratory speech-compression system for spacecraft application - microcircuit technology and determination of most feasible design approac

Komposit Beton-profil Lip Channel Untuk Mencegah Tekuk Lateral-torsional

Lip channels profile usually failed before reaching its maximum loaddue to torsional. To avoid this problem, usually lateral support isprovided to the profile. One of the solution is by filling the profile withconcrete material (composite). The purpose of this research is to knowthe bending strength ratio of lip channels profile to lip channels-concretecomposite. The specimens in this research is lip channelsC85x40x8x0.90, C85x40x8x0.65, C75x40x10x0.75, C75x40x10x0.65and two pieces of composite beams of 85x40x1100 mm with two piecesof composite beams 75x40x1100 mm. Beside the bending strength testas the main test, additional test should be runned by concretecompression test using 12 pieces of 150x150x150 cube and 12 pieces oflip channels. Based on this research, it is found that the bending strengthof the lip channels (P-1) and composite beam (K-1) are 262.06 MPa and366.35 MPa each. The result means that there is 1.40 (39.80%)increasing in bending strength. For P-2 the bending strength is 268.64MPa while K-2 is 453.60 MPa or increased 1.69 (68.85%). For P-3bending strength is 180.90 MPa while K-3 is 364.75 MPa, increased 2.02(101.63%). For P-4 the bending strength is 207.59 MPa while K-4 is430.05 MPa, increased 2.07( 107.16%)

Utilizing pHluorin-Tagged Receptors to Monitor Subcellular Localization and Trafficking

Understanding membrane protein trafficking, assembly, and expression requires an approach that differentiates between those residing in intracellular organelles and those localized on the plasma membrane. Traditional fluorescence-based measurements lack the capability to distinguish membrane proteins residing in different organelles. Cutting edge methodologies transcend traditional methods by coupling pH-sensitive fluorophores with total internal reflection fluorescence microscopy (TIRFM). TIRF illumination excites the sample up to approximately 150 nm from the glass-sample interface, thus decreasing background, increasing the signal to noise ratio, and enhancing resolution. The excitation volume in TIRFM encompasses the plasma membrane and nearby organelles such as the peripheral ER. Superecliptic pHluorin (SEP) is a pH sensitive version of GFP. Genetically encoding SEP into the extracellular domain of a membrane protein of interest positions the fluorophore on the luminal side of the ER and in the extracellular region of the cell. SEP is fluorescent when the pH is greater than 6, but remains in an off state at lower pH values. Therefore, receptors tagged with SEP fluoresce when residing in the endoplasmic reticulum (ER) or upon insertion in the plasma membrane (PM) but not when confined to a trafficking vesicle or other organelles such as the Golgi. The extracellular pH can be adjusted to dictate the fluorescence of receptors on the plasma membrane. The difference in fluorescence between TIRF images at neutral and acidic extracellular pH for the same cell corresponds to a relative number of receptors on the plasma membrane. This allows a simultaneous measurement of intracellular and plasma membrane resident receptors. Single vesicle insertion events can also be measured when the extracellular pH is neutral, corresponding to a low pH trafficking vesicle fusing with the plasma membrane and transitioning into a fluorescent state. This versatile technique can be exploited to study localization, expression, and trafficking of membrane proteins

A COMPARISON OF THE EFFECTIVENESS OF THE “TOOTHKEEPER’ AND A TRADITIONAL DENTAL HEALTH EDUCATION PROGRAM

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66303/1/j.1752-7325.1975.tb04031.x.pd

Arkansas Cooperative Beef Bull Performance Test 1991

Performance testing of beef bulls was initiated to improve productivity of Arkansas beef cattle through breeding. This cooperative testing program provides cattlemen with reliable information for identifying animals with superior breeding value for the traits of production measured in the test. By using the information as a basis for herd sire selection, a breeder can greatly increase the chances of obtaining a bull that will sire rapid-gaining, more efficient, highquality calves. Such calves can increase profits for both the breeder and the feeder. This testing program provides information that is useful to financial institutes in arranging their lending programs and to companies in developing their educational, promotional and marketing programs

Hidden geometric correlations in real multiplex networks

Real networks often form interacting parts of larger and more complex systems. Examples can be found in different domains, ranging from the Internet to structural and functional brain networks. Here, we show that these multiplex systems are not random combinations of single network layers. Instead, they are organized in specific ways dictated by hidden geometric correlations between the individual layers. We find that these correlations are strong in different real multiplexes, and form a key framework for answering many important questions. Specifically, we show that these geometric correlations facilitate: (i) the definition and detection of multidimensional communities, which are sets of nodes that are simultaneously similar in multiple layers; (ii) accurate trans-layer link prediction, where connections in one layer can be predicted by observing the hidden geometric space of another layer; and (iii) efficient targeted navigation in the multilayer system using only local knowledge, which outperforms navigation in the single layers only if the geometric correlations are sufficiently strong. Our findings uncover fundamental organizing principles behind real multiplexes and can have important applications in diverse domains.Comment: Supplementary Materials available at http://www.nature.com/nphys/journal/v12/n11/extref/nphys3812-s1.pd

An Exploratory Study into the Factors Impeding Ethical Consumption

Although consumers are increasingly engaged with ethical factors when forming opinions about products and making purchase decisions, recent studies have highlighted significant differences between consumers’ intentions to consume ethically, and their actual purchase behaviour. This article contributes to an understanding of this “ethical purchasing gap” through a review of existing literature, and the inductive analysis of focus group discussions. A model is suggested which includes exogenous variables such as moral maturity and age which have been well covered in the literature, together with further impeding factors identified from the focus group discussions. For some consumers, inertia in purchasing behaviour was such that the decision-making process was devoid of ethical considerations. Several manifested their ethical views through post-purchase dissonance and retrospective feelings of guilt. Others displayed a reluctance to consume ethically due to personal constraints, a perceived negative impact on image or quality, or an outright negation of responsibility. Those who expressed a desire to consume ethically often seemed deterred by cynicism, which caused them to question the impact they, as an individual, could achieve. These findings enhance the understanding of ethical consumption decisions and provide a platform for future research in this area

Scaling and root planing with and without periodontal flap surgery

. Complete removal of calculus is a primary part of achieving a “biologically acceptable” tooth surface in the treatment of periodontitis. Rabbani et al. reported that a single episode of scaling did not completely remove subgingival calculus and that the deeper the periodontal pocket, the less complete the calculus removal. The purpose of the present study was to evaluate the effectiveness of scaling relative to calculus removal following reflection of a periodontal flap. Each of 21 patients who required multiple extractions had 2 teeth scaled, 2 teeth scaled following the reflection of a periodontal flap, and 2 teeth serve as controls. Local anesthesia was used. Following extraction, the % of subgingival tooth surfaces free of calculus was determined using the method described by Rabbani with a stereomicroscope. Results showed that while scaling only (SO) and scaling with a flap (SF) increased the % of root surface without calculus, scaling following the reflection of a flap aided calculus removal in pockets 4 mm and deeper. Comparison of SO versus SF at various pocket depths for % of tooth surfaces completely free of calculus showed 1 to 3 mm pockets to be 86% versus 86%, 4 to 6 mm pockets to be 43% versus 76% and >6 mm pockets to be 32% versus 50%. The extent of residual calculus was directly related to pocket depth, was greater following scaling only, and was greatest at the CEJ or in association with grooves, fossae or furcations. No differences were noted between anterior and posterior teeth or between different tooth surfaces.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73823/1/j.1600-051X.1986.tb01461.x.pd

Residual Energy Dispersal Fracturing: A newly proposed term for fractures propagating from sharp-force trauma

Objectives: The identification and interpretation of skeletal trauma is an important topic in osteoarchaeology, forensic anthropology and palaeosciences. Trauma analysis is a fast-moving sub-discipline with constantly evolving methodological approaches. This paper describes the process of a particular form of fracturing that propagates specifically from the floor of cut marks and proposes new terminology for this subset of fractures. Materials and Methods: This terminological gap was identified during the reexamination of remains from a minimum of 52 decapitated individuals (52 postcranial and 47 cranial remains) found in a mass grave from the 10th–11th century CE on Ridgeway Hill near Weymouth in Dorset (UK) in 2009. Originally analyzed by Oxford Archaeology Ltd., all individuals in this collection were re-appraised using digital technology to test new techniques for this study. Results: During this investigation, it has become apparent that the length of chop marks can be overestimated during some conventional analysis because the chop transitions into a fracture propagating from the floor of the chop mark. Discussion: To increase awareness of these fractures, the term residual energy dispersal (RED) fractures is proposed as these are distinct from other radiating fractures arising from sharp-blunt-force trauma. The ability to distinguish RED fractures from others has the potential to contribute to the identification of previously unidentified chop marks and to the interpretation of events surrounding an injury