29 research outputs found
Study of the polycarbonate-urethane/metal contact in different positions during gait cycle
Nowadays, a growing number of young andmore active patients receive hip replacement.More strenuous activities in such patients involve higher friction and wear rates, with friction on the bearing surface being crucial to ensure arthroplasty survival in the long term. Over the last years, the polycarbonate-urethane has offered a feasible alternative to conventional bearings. A finite element model of a healthy hip joint was developed and adjusted to three gait phases (heel strike, mid-stance, and toe-off), serving as a benchmark for the assessment of the results of joint replacement model. Three equivalent models were made with the polycarbonate-urethane Tribofit system implanted, one for each of the three gait phases, after reproducing a virtual surgery over the respective healthy models. Standard body-weight loads were considered: 230% body-weight toe-off, 275% body-weight mid-stance, and 350% body-weight heel strike. Contact pressures were obtained for the different models. When comparing the results corresponding to the healthy model to polycarbonate-urethane joint, contact areas are similar and so contact pressures are within a narrower value range. In conclusion, polycarbonate-urethane characteristics are similar to those of the joint cartilage. So, it is a favorable alternative to traditional bearing surfaces in total hip arthroplasty, especially in young patients
Gender differences in the incidence of and risk factors for hip fracture: A 16-year longitudinal study in a southern European population
Objectives To analyze independently in men and women the incidence rate of and risk factors for hip fracture in a southern European population. Illiteracy, dementia, clinically significant depression and disability were factors to receive special emphasis. Study design A community sample of 4803 individuals aged over 55 years was assessed in a two-phase case-finding study in Zaragoza, Spain, and was followed up for 16 years. Medical history and psychiatric history were collected with standardized instruments, including the History and Aetiology Schedule, the Geriatric Mental State (GMS) scale, and a Risk Factors Questionnaire. Operational criteria were used to define covariates, including diagnostic criteria for both dementia and depression. The statistical analysis included calculations of incidence rate, IR; women/men incidence rate ratio (IRR); and Hazard Ratios (HR) in multivariate Cox proportional hazards regression models. Main outcome measures Cases of hip fracture (International Classification of Diseases, WHO) identified in the treating hospitals, validated by blinded researchers. Results Hip fractures were more frequent among women than men (IRR = 3.1). Illiteracy (HR = 1.55) and depression (HR = 1.44) increased the risk in women, and smoking (HR = 2.13) and disability in basic activities of daily living (HR = 3.14) increased the risk in men. Dementia was associated with an increased risk in an univariate analysis, but the association disappeared (power = 85% in men, 95% in women) when disability was included in the multivariate models. Conclusions The IR of hip fractures was three times higher among women. Illiteracy and clinically significant depression among women and active smoking and disability (HR = 3.14) among men independently increased the risk, but dementia did not
Cementless hydroxyapatite coated hip prostheses
More than twenty years ago, hydroxyapatite (HA), calcium phosphate ceramics, was introduced as a coating for cementless hip prostheses. The choice of this ceramic is due to its composition being similar to organic apatite bone crystals. This ceramic is biocompatible, bioactive, and osteoconductive. These qualities facilitate the primary stability and osseointegration of implants
Our surgical experience includes the implantation of more than 4,000 cementless hydroxyapatite coated hip prostheses since 1990
The models implanted are coated with HA in the acetabulum and in the metaphyseal area of the stem.The results corresponding to survival and stability of implants were very satisfactory in the long-term. From our experience, HA-coated hip implants are a reliable alternative which can achieve long termsurvival, provided that certain requirements aremet: good design selection, sound choice of bearing surfaces based on patient life expectancy,meticulous surgical technique, and indications based on adequate bone quality
What is the relevance of the tip-apex distance as a predictor of lag screw cut-out?
Using a simple mathematical formulation, the relationship between the position of the lag screw tip (relevant to both intramedullary and extramedullary devices) and the concept of tip-apex distance (TAD) was derived. TAD is widely used in operating theaters as a surgical guideline in relation to the fixation of trochanteric fractures, and in clinical studies as a predictor of lag screw cut-out. In order to visualize better this concept, the locus of points having the same TAD was plotted and the dependence of TAD on the location of the lag screw tip was also reported. It was shown that TAD should be adjusted for the size of the femoral head (a variable which varies a lot according to the sex of the patient) while no correlation was found between TAD and bone morphometry indices obtained from micro-CT data (BV/TV and Tb.Th). Therefore, these results seem to suggest that TAD lacks mechanical justification and that predictors which are based on mechanical properties, such as bone density, should be investigated further
Improved lag screw positioning in the treatment of proximal femur fractures using a novel computer assisted surgery method: a cadaveric study
Standardised cement augmentation of the PFNA using a perforated blade: A new technique and preliminary clinical results. A prospective multicentre trial
Gender differences in the association of cognitive impairment with the risk of hip fracture in the older population
Objectives: To test the hypothesis that differences by gender will be observed in the association of hip fracture risk with stages of cognitive impairment; and to explore the association between Petersen''s “mild cognitive impairment” (MCI) and DSM-5 “mild neurocognitive disorder” (MND). Study design: A community sample of 4803 individuals aged 55+ years was assessed in a two-phase case-finding enquiry in Zaragoza, Spain, and was followed up for 16 years. Medical and psychiatric history was collected with standardized instruments, including the Mini-Mental Status Examination (MMSE), Geriatric Mental State (GMS), History and Aetiology Schedule, and a Risk Factors Questionnaire. The statistical analysis included calculations of Hazard Ratios (HR) in multivariate Cox proportional hazards regression models. Main outcome measures: Identified cases of hip fracture, validated by blind researchers. Results: In men, hip fracture risk was increased at the “mild” (HR = 4.99 (1.39–17.91)) and at the “severe” (HR = 9.31 (1.35–64.06)) stages of cognitive impairment, indicated by MMSE performance. In contrast, in women no association could be documented at the “mild stage” (power = 89%), and the association disappeared altogether at the “severe stage” in the final multivariate statistical model (power 100%). No association observed between hip fracture and mild cognitive impairment in both men (power = 28% for P-MCI) and women (power = 44% and 19% for Petersen''s MCI and DSM-5 MND, respectively). Conclusions: Increased hip fracture risk was associated with “mild” stages of cognitive impairment in men, but not in women. To explore the potential association with the construct MCI or MND, studies with greater statistical power would be required
The vertical hip fracture – a treatment challenge. A cohort study with an up to 9 year follow-up of 137 consecutive hips treated with sliding hip screw and antirotation screw
<p>Abstract</p> <p>Background</p> <p>Femoral neck fractures with a vertical orientation have been associated with an increased risk for failure as they are both axial and rotational unstable and experience increased shear forces compared to the conventional and more horizontally oriented femoral neck fractures. The purpose of this study was to analyse outcome and risk factors for reoperation of these uncommon fractures.</p> <p>Methods</p> <p>A cohort study with a consecutive series of 137 hips suffering from a vertical hip fracture, treated with one method: a sliding hips screw with plate and an antirotation screw. Median follow-up time was 4.8 years. Reoperation data was validated against the National Board of Health and Welfare’s national registry using the unique Swedish personal identification number.</p> <p>Results</p> <p>The total reoperation rate was 18%. After multivariable Logistic regression analysis adjusting for possible confounding factors there was an increased risk for reoperation for displaced fractures (22%) compared to undisplaced fractures (3%), and for fractures with poor implant position (38%) compared to fractures with adequate implant position (15%).</p> <p>Conclusions</p> <p>The reoperation rate was high, and special attention should be given to achieve an appropriate position of the implant.</p