Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

Glaze application on monolithic zirconia (Y-TZP) can be a practical approach to improve the mechanical properties of this material. Objective: Our study evaluated the effect of glazing side and mechanical cycling on the biaxial flexure strength (BFS) of a Y-TZP. Methodology: Eighty sintered Y-TZP discs (Ø:12 mm; thickness: 1.2 mm - ISO 6872) were produced and randomly assigned into eight groups (n=10), according to the factors “glazing side” (control – no glazing; GT – glaze on tensile side; GC – glaze on compression side; GTC – glaze on both sides) and “mechanical aging” (non-aged and aged, A – mechanical cycling: 1.2×106, 84 N, 3 Hz, under water at 37°C). Specimens were subjected to BFS test (1 mm/min; 1,000 Kgf load cell) and fractured surfaces were analyzed by stereomicroscopy and SEM. Hsueh’s rigorous solutions were used to estimate the stress at failure of glazed specimens. Two-way ANOVA, Tukey’s test (5%), and Weibull analysis were performed. Results: The “glazing side”, “mechanical aging” and the interaction of the factors were significant (p<0.05). Groups GC (1157.9±146.9 MPa), GT (1156.1±195.3 MPa), GTC (986.0±187.4 MPa) and GTC-A (1131.9±128.9 MPa) presented higher BFS than control groups (Tukey, 5%). Hsueh’s rigorous solutions showed that the maximum tensile stress was presented in the bottom of zirconia layer, at the zirconia/glaze interface. Weibull characteristic strength (σo) of the GC was higher than all groups (p<0.05), except to GT, GTC-A and GTC, which were similar among them. The fractography showed initiation of failures from zirconia the tensile side regardless of the side of glaze application and fatigue. Conclusion: Glazing zirconia applied on both tensile and compression sides improves the flexural strength of Y-TZP, regardless the mechanical aging

Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a $Z$ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 $< p_{\textrm{T}} < 100$ GeV and in the pseudorapidity range $2.5 < \eta < 4$. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb$^{-1}$. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages

Study of the B−→Λc+Λˉc−K−B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} decay

The decay $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ is studied in proton-proton collisions at a center-of-mass energy of $\sqrt{s}=13$ TeV using data corresponding to an integrated luminosity of 5 $\mathrm{fb}^{-1}$ collected by the LHCb experiment. In the $\Lambda_{c}^+ K^{-}$ system, the $\Xi_{c}(2930)^{0}$ state observed at the BaBar and Belle experiments is resolved into two narrower states, $\Xi_{c}(2923)^{0}$ and $\Xi_{c}(2939)^{0}$, whose masses and widths are measured to be $$m(\Xi_{c}(2923)^{0}) = 2924.5 \pm 0.4 \pm 1.1 \,\mathrm{MeV}, \\ m(\Xi_{c}(2939)^{0}) = 2938.5 \pm 0.9 \pm 2.3 \,\mathrm{MeV}, \\ \Gamma(\Xi_{c}(2923)^{0}) = \phantom{000}4.8 \pm 0.9 \pm 1.5 \,\mathrm{MeV},\\ \Gamma(\Xi_{c}(2939)^{0}) = \phantom{00}11.0 \pm 1.9 \pm 7.5 \,\mathrm{MeV},$$ where the first uncertainties are statistical and the second systematic. The results are consistent with a previous LHCb measurement using a prompt $\Lambda_{c}^{+} K^{-}$ sample. Evidence of a new $\Xi_{c}(2880)^{0}$ state is found with a local significance of $3.8\,\sigma$, whose mass and width are measured to be $2881.8 \pm 3.1 \pm 8.5\,\mathrm{MeV}$ and $12.4 \pm 5.3 \pm 5.8 \,\mathrm{MeV}$, respectively. In addition, evidence of a new decay mode $\Xi_{c}(2790)^{0} \to \Lambda_{c}^{+} K^{-}$ is found with a significance of $3.7\,\sigma$. The relative branching fraction of $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ with respect to the $B^{-} \to D^{+} D^{-} K^{-}$ decay is measured to be $2.36 \pm 0.11 \pm 0.22 \pm 0.25$, where the first uncertainty is statistical, the second systematic and the third originates from the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb public pages

Measurement of the ratios of branching fractions R(D∗)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

The ratios of branching fractions $\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu})$ and $\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu})$ are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb${ }^{-1}$ of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode $\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}$. The measured values are $\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024$ and $\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066$, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is $\rho=-0.43$. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

Objective: Glaze application on monolithic zirconia (Y-TZP) can be a practical approach to improve the mechanical properties of this material. Our study evaluated the effect of glazing side and mechanical cycling on the biaxial flexure strength (BFS) of a Y-TZP. Methodology: Eighty sintered Y-TZP discs (Ø:12 mm; thickness: 1.2 mm - ISO 6872) were produced and randomly assigned into eight groups (n=10), according to the factors "glazing side" (control - no glazing; GT - glaze on tensile side; GC - glaze on compression side; GTC - glaze on both sides) and "mechanical aging" (non-aged and aged, A - mechanical cycling: 1.2×106, 84 N, 3 Hz, under water at 37°C). Specimens were subjected to BFS test (1 mm/min; 1,000 Kgf load cell) and fractured surfaces were analyzed by stereomicroscopy and SEM. Hsueh's rigorous solutions were used to estimate the stress at failure of glazed specimens. Two-way ANOVA, Tukey's test (5%), and Weibull analysis were performed. Results: The "glazing side", "mechanical aging" and the interaction of the factors were significant (p<0.05). Groups GC (1157.9±146.9 MPa), GT (1156.1±195.3 MPa), GTC (986.0±187.4 MPa) and GTC-A (1131.9±128.9 MPa) presented higher BFS than control groups (Tukey, 5%). Hsueh's rigorous solutions showed that the maximum tensile stress was presented in the bottom of zirconia layer, at the zirconia/glaze interface. Weibull characteristic strength (σo) of the GC was higher than all groups (p<0.05), except to GT, GTC-A and GTC, which were similar among them. The fractography showed initiation of failures from zirconia the tensile side regardless of the side of glaze application and fatigue. Conclusion: Glazing zirconia applied on both tensile and compression sides improves the flexural strength of Y-TZP, regardless the mechanical aging

Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments

<div><p>Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treated as follows (n = 30): C– without treatment; UA– universal adhesive application; FM– 10% hydrofluoric acid and silane application; OM–airborne-particle abrasion with aluminum oxide and silane application; RP– tribochemical silica coating; and CA– surface grinding and application of universal adhesive. Composite resin cylinders were made on the treated surface. Specimens from each group were assigned randomly to two subgroups (n = 15) considering storage condition: Baseline (shear tests after 48 hours) or Storage (tests after 6 months under distilled water). The treated surfaces were analyzed by goniometry, roughness, and SEM. Two-way ANOVA and 1-way ANOVA were applied to analyze the bond data and roughness / contact angle data, respectively, followed by Tukey's test (α = 5%). Surface treatments and storage conditions affected bond strengths (p < 0.01). Surface grinding (CA) followed by universal adhesive promoted the highest value of bond strength (14.5 ± 4.8 MPa for baseline, 8.5 ± 3.4 MPa for storage) and the roughest ceramic surface. Grinding with silicon carbide paper (simulating diamond bur) followed by the application of a universal adhesive system is the best option for repairing fractures of the polymer-infiltrated ceramic network.</p></div

Measurement of prompt D+D^+ and Ds+D^+_{s} production in pPbp\mathrm{Pb} collisions at sNN=5.02 \sqrt {s_{\mathrm{NN}}}=5.02\,TeV

International audienceThe production of prompt $D^+$ and $D^+_{s}$ mesons is studied in proton-lead collisions at a centre-of-mass energy of $\sqrt {s_{\mathrm{NN}}}=5.02\,$TeV. The data sample corresponding to an integrated luminosity of $(1.58\pm0.02)\mathrm{nb}^{-1}$ is collected by the LHCb experiment at the LHC. The differential production cross-sections are measured using $D^+$ and $D^+_{s}$ candidates with transverse momentum in the range of $0<p_{\mathrm{T}} <14\,\mathrm{GeV}/c$ and rapidities in the ranges of $1.5<y^*<4.0$ and $-5.0<y^*<-2.5$ in the nucleon-nucleon centre-of-mass system. For both particles, the nuclear modification factor and the forward-backward production ratio are determined. These results are compared with theoretical models that include initial-state nuclear effects. In addition, measurements of the cross-section ratios between $D^+$, $D^+_{s}$ and $D^0$ mesons are presented, providing a baseline for studying the charm hadronization in lead-lead collisions at LHC energies

Improved measurement of CPCP violation parameters in Bs0→J/ψK+K−B_s^0\to J/\psi K^+K^- decays in the vicinity of the ϕ(1020)\phi(1020) resonance

The decay-time-dependent $CP$ asymmetry in $B_s^0\to J/\psi(\to \mu^+\mu^-) K^+ K^-$ decays is measured using proton-proton collision data, corresponding to an integrated luminosity of $6 {\rm fb}^{-1}$, collected with the LHCb detector at a center-of-mass energy of 13 TeV. Using a sample of approximately 349 000 $B_s^0$ signal decays with an invariant $K^+ K^-$ mass in the vicinity of the $\phi(1020)$ resonance, the $CP$-violating phase $\phi_s$ is measured, along with the difference in decay widths of the light and heavy mass eigenstates of the $B_s^0$-$\overline{B}_s^0$ system, $\Delta\Gamma_s$, and the difference of the average $B_s^0$ and $B^0$ meson decay widths, $\Gamma_s-\Gamma_d$. The values obtained are $\phi_s = -0.039 \pm 0.022 \pm 0.006$ rad, $\Delta\Gamma_s = 0.0845 \pm 0.0044 \pm 0.0024 ~{\rm ps}^{-1}$ and $\Gamma_s-\Gamma_d = -0.056^{\:+\:0.0013}_{\:-\:0.0015} \pm 0.0014 ~{\rm ps}^{-1}$, where the first uncertainty is statistical and the second systematic. These are the most precise single measurements to date and are consistent with expectations based on the Standard Model and with the previous LHCb analyses of this decay. These results are combined with previous independent LHCb measurements. The phase $\phi_s$ is also measured independently for each polarization state of the $K^+K^-$ system and shows no evidence for polarization dependence.The decay-time-dependent $CP$ asymmetry in $B^0_s\to J/\psi(\to \mu^{+}\mu^{-}) K^{+}K^{-}$ decays is measured using proton-proton collision data, corresponding to an integrated luminosity of 6 $fb^{-1}$, collected with the LHCb detector at a center-of-mass energy of 13 TeV. Using a sample of approximately 349 000 $B^{0}_{s}$ signal decays with an invariant $K^{+}K^{-}$ mass in the vicinity of the $\phi(1020)$ resonance, the $CP$-violating phase $\phi_s$ is measured, along with the difference in decay widths of the light and heavy mass eigenstates of the $B^0_s$-$\bar{B}^0_s$ system, $\Delta\Gamma_s$, and the difference of the average $B^0_s$ and $B^0$ meson decay widths, $\Gamma_s-\Gamma_d$. The values obtained are $\phi_s = \ -0.039 \pm 0.022 \pm 0.006$ rad, $\Delta\Gamma_s = 0.0845 \pm 0.0044 \pm 0.0024$ ps$^{-1}$ and $\Gamma_s-\Gamma_d = -0.0056 ^{+ 0.0013}_{-0.0015} \pm 0.0014$ ps$^{-1}$, where the first uncertainty is statistical and the second systematic. These are the most precise single measurements to date and are consistent with expectations based on the Standard Model and with the previous LHCb analyses of this decay. These results are combined with previous independent LHCb measurements. The phase $\phi_s$ is also measured independently for each polarization state of the $K^{+}K^{-}$ system and shows no evidence for polarization dependence

Measurement of prompt D+D^+ and Ds+D^+_{s} production in pPbp\mathrm{Pb} collisions at sNN=5.02 \sqrt {s_{\mathrm{NN}}}=5.02\,TeV

International audienceThe production of prompt $D^+$ and $D^+_{s}$ mesons is studied in proton-lead collisions at a centre-of-mass energy of $\sqrt {s_{\mathrm{NN}}}=5.02\,$TeV. The data sample corresponding to an integrated luminosity of $(1.58\pm0.02)\mathrm{nb}^{-1}$ is collected by the LHCb experiment at the LHC. The differential production cross-sections are measured using $D^+$ and $D^+_{s}$ candidates with transverse momentum in the range of $0<p_{\mathrm{T}} <14\,\mathrm{GeV}/c$ and rapidities in the ranges of $1.5<y^*<4.0$ and $-5.0<y^*<-2.5$ in the nucleon-nucleon centre-of-mass system. For both particles, the nuclear modification factor and the forward-backward production ratio are determined. These results are compared with theoretical models that include initial-state nuclear effects. In addition, measurements of the cross-section ratios between $D^+$, $D^+_{s}$ and $D^0$ mesons are presented, providing a baseline for studying the charm hadronization in lead-lead collisions at LHC energies

Improved measurement of CPCP violation parameters in Bs0→J/ψK+K−B^0_s\to J/\psi K^{+}K^{-} decays in the vicinity of the ϕ(1020)\phi(1020) resonance

International audienceThe decay-time-dependent $CP$ asymmetry in $B^0_s\to J/\psi(\to \mu^{+}\mu^{-}) K^{+}K^{-}$ decays is measured using proton-proton collision data, corresponding to an integrated luminosity of 6 $fb^{-1}$, collected with the LHCb detector at a center-of-mass energy of 13 TeV. Using a sample of approximately 349 000 $B^{0}_{s}$ signal decays with an invariant $K^{+}K^{-}$ mass in the vicinity of the $\phi(1020)$ resonance, the $CP$-violating phase $\phi_s$ is measured, along with the difference in decay widths of the light and heavy mass eigenstates of the $B^0_s$-$\bar{B}^0_s$ system, $\Delta\Gamma_s$, and the difference of the average $B^0_s$ and $B^0$ meson decay widths, $\Gamma_s-\Gamma_d$. The values obtained are $\phi_s = \ -0.039 \pm 0.022 \pm 0.006$ rad, $\Delta\Gamma_s = 0.0845 \pm 0.0044 \pm 0.0024$ ps$^{-1}$ and $\Gamma_s-\Gamma_d = -0.0056 ^{+ 0.0013}_{-0.0015} \pm 0.0014$ ps$^{-1}$, where the first uncertainty is statistical and the second systematic. These are the most precise single measurements to date and are consistent with expectations based on the Standard Model and with the previous LHCb analyses of this decay. These results are combined with previous independent LHCb measurements. The phase $\phi_s$ is also measured independently for each polarization state of the $K^{+}K^{-}$ system and shows no evidence for polarization dependence