5,523 research outputs found
Derivation of the physical parameters of the jet in S5 0836+710 from stability analysis
A number of extragalactic jets show periodic structures at different scales
that can be associated with growing instabilities. The wavelengths of the
developing instability modes and their ratios depend on the flow parameters, so
the study of those structures can shed light on jet physics at the scales
involved. In this work, we use the fits to the jet ridgeline obtained from
different observations of S5 B0836710 and apply stability analysis of
relativistic, sheared flows to derive an estimate of the physical parameters of
the jet. Based on the assumption that the observed structures are generated by
growing Kelvin-Helmholtz (KH) instability modes, we have run numerical
calculations of stability of a relativistic, sheared jet over a range of
different jet parameters. We have spanned several orders of magnitude in
jet-to-ambient medium density ratio, and jet internal energy, and checked
different values of the Lorentz factor and shear layer width. This represents
an independent method to obtain estimates of the physical parameters of a jet.
By comparing the fastest growing wavelengths of each relevant mode given by the
calculations with the observed wavelengths reported in the literature, we have
derived independent estimates of the jet Lorentz factor, specific internal
energy, jet-to-ambient medium density ratio and Mach number. We obtain a jet
Lorentz factor , specific internal energy of , jet-to-ambient medium density ratio of , and an internal (classical) jet Mach number of . We also find that the wavelength ratios are better recovered by a
transversal structure with a width of of the jet radius. This
method represents a powerful tool to derive the jet parameters in all jets
showing helical patterns with different wavelengths.Comment: Accepted for publication in A&A, 15 pages, 12 figure
Frequency combs and platicons in optical microresonators with normal GVD
We predict the existence of a novel type of the flat-top dissipative
solitonic pulses, "platicons", in microresonators with normal group velocity
dispersion (GVD). We propose methods to generate these platicons from cw pump.
Their duration may be altered significantly by tuning the pump frequency. The
transformation of a discrete energy spectrum of dark solitons of the
Lugiato-Lefever equation into a quasicontinuous spectrum of platicons is
demonstrated. Generation of similar structures is also possible with
bi-harmonic, phase/amplitude modulated pump or via laser injection locking.Comment: 9 pages, 6 figure
Does the Borexino experiment have enough resolution to detect the neutrino flavor day-night asymmetry?
The Earth's density distribution can be approximately considered piecewise
continuous at the scale of two-flavor oscillations of neutrinos with energies
about 1 MeV. This quite general assumption appears to be enough to analytically
calculate the day-night asymmetry factor. Using the explicit time averaging
procedure, we show that, within the leading-order approximation, this factor is
determined by the electron density immediately before the detector, i.e. in the
Earth's crust. Within the approximation chosen, the resulting asymmetry factor
does not depend either on the properties of the inner Earth's layers or on the
substance and the dimensions of the detector. For beryllium neutrinos, we
arrive at the asymmetry factor estimation of about , which
is at least one order of magnitude beyond the present experimental resolution,
including that of the Borexino experiment.Comment: 16 pages, 3 figures; Talk given at the 17th International Seminar on
High Energy Physics "QUARKS'2012" (Yaroslavl, Russia, June 4-10, 2012); to
appear in the Proceedings volum
Effect of copper content, initial structure, and scheme of treatment on magnetic properties of ultra-thin grain oriented electrical steel
The effect of the copper content, initial structure, and scheme of treatment on the magnetic properties of an ultra-thin grain oriented electrical steel has been investigated. In the material with copper and an initial sharp texture, the nucleation of new grains upon primary recrystallization is connected with deformation twins; in the samples without copper and with copper and diffuse texture, it is connected predominantly with shear bands and transition bands. Upon heating at a rate of ∼0.004 K/s, the temperature of primary recrystallization in the copper-bearing samples is considerably higher than in the copper-free material. Upon heating at a rate of ∼4 K/s the appearance of new grains occurs almost simultaneously for all of the studied samples. In the samples with copper and initial sharp texture after annealing at 1050 C, a significant part of the volume is occupied by grains that had undergone normal grain growth; in the samples without copper and with copper and diffuse texture, anomalous growth is hardly observed at all. To obtain high final magnetic properties of the ultra-thin grain oriented electrical steel produced by the Littmann method, it has been suggested to use an grain oriented electrical steel with 0.5% Cu that exhibits the diffuse orientation of grains as the workpiece. © 2013 Pleiades Publishing, Ltd
Neutrino spin rotation in dense matter and electromagnetic field
Exact solutions of the Dirac--Pauli equation for massive neutrino with
anomalous magnetic moment interacting with dense matter and strong
electromagnetic field are found. The complete system of neutrino wavefunctions,
which show spin rotation properties are obtained and their possible
applications are discussed.Comment: 11 pages, latex, misprints are correcte
Secondary recrystallization in Fe-3% Si alloy with (110)[001] single-component texture
After the primary recrystallization of a preliminarily deformed (110)[001] single crystal, the texture also has the preferred (110)[001] orientation. Furthermore, the texture contains weak orientations, a major part of which is formed at the sample surface and can be described by a spectrum of scattered orientations 120вЊ©210вЊ.351 вЊ©103вЊ. A further heating leads to two concurrent processes taking place in the samples, i.e., the normal growth of Goss grains and secondary recrystallization. Abnormally grown crystals are represented by a quartet of orientations related with the initial Goss orientation by a rotation around [011], [011̄], [101], and [101̄] axes at an angle of ∼30. The crystallographic relationship between the initial and final grain orientations can be explained by their closeness to special misorientations as follows: Σ9, Σ19a, Σ27a, and Σ33a (rotation around 〈110⌠axes to close angles). © 2013 Pleiades Publishing, Ltd
Formation of special misorientations related to transition bands in structure of deformed and annealed single crystal (110)[001] of Fe-3% Si alloy
A transition band between two deformation bands retains for the most part the orientation (110)[001] and shrinks to a thin interlayer or boundary with increasing degree of deformation. At a certain stage of deformation, the microvolumes that are arranged along the interface of the bands become adjusted to special misorientations. During primary recrystallization, cube-on-edge (Goss) grains, which grow from the transition band, have portions of special boundaries common with the deformed matrix; these boundaries were found earlier between the deformation bands. This indicates that the local domains with special misorientations formed at the stage of cold deformation transform during annealing into the corresponding primary-recrystallization nuclei. © 2013 Pleiades Publishing, Ltd
Catching the Radio Flare in CTA 102 III. Core-Shift and Spectral Analysis
The temporal and spatial spectral evolution of the jets of AGN can be studied
with multi-frequency, multi-epoch VLBI observations. The combination of both,
morphological and spectral parameters can be used to derive source intrinsic
physical properties such as the magnetic field and the non-thermal particle
density. In the first two papers of this series, we analyzed the single-dish
light curves and the VLBI kinematics of the blazar CTA 102 and suggested a
shock-shock interaction between a traveling and a standing shock wave as a
possible scenario to explain the observed evolution of the component associated
to the 2006 flare. In this paper we investigate the core-shift and spectral
evolution to test our hypothesis of a shock-shock interaction. We used 8
multi-frequency VLBA observations to analyze the temporal and spatial evolution
of the spectral parameters during the flare. We observed CTA 102 between May
2005 and April 2007 using the VLBA at six different frequencies spanning from 2
- 86 GHz. After the calibrated VLBA images were corrected for opacity, we
performed a detailed spectral analysis. From the derived values we estimated
the magnetic field and the density of the relativistic particles. The detailed
analysis of the opacity shift reveals that the position of the jet core is
proportional to nu^-1 with some temporal variations. The value suggests
possible equipartition between magnetic field energy and particle kinetic
energy densities at the most compact regions. From the variation of the
physical parameters we deduced that the 2006 flare in CTA 102 is connected to
the ejection of a new traveling feature (t=2005.9) and the interaction between
this shock wave and a stationary structure around 0.1 mas from the core. The
source kinematics together with the spectral and structural variations can be
described by helical motions in an over-pressured jet.Comment: 35 pages, 46 figure
- …