19,577 research outputs found
Numerical methods for analyzing electromagnetic scattering
The wave propagation inside a cylindrical waveguide, coated with lossy dielectric material due to the incidence of a plane wave at the open end of the guide, was studied. The general properties of the normal mode propagation were investigated
Finite and infinite h-plane bifurcation of waveguide with anisotropic plasma medium
H-plane bifurcation in parallel plate waveguide filled with homogeneous, anisotropic, and temperate plasm
Point2Volume: A vision-based dietary assessment approach using view synthesis
Dietary assessment is an important tool for nutritional epidemiology studies. To assess the dietary intake, the common approach is to carry out 24-h dietary recall (24HR), a structured interview conducted by experienced dietitians. Due to the unconscious biases in such self-reporting methods, many research works have proposed the use of vision-based approaches to provide accurate and objective assessments. In this article, a novel vision-based method based on real-time three-dimensional (3-D) reconstruction and deep learning view synthesis is proposed to enable accurate portion size estimation of food items consumed. A point completion neural network is developed to complete partial point cloud of food items based on a single depth image or video captured from any convenient viewing position. Once 3-D models of food items are reconstructed, the food volume can be estimated through meshing. Compared to previous methods, our method has addressed several major challenges in vision-based dietary assessment, such as view occlusion and scale ambiguity, and it outperforms previous approaches in accurate portion size estimation
Comparing five depression measures in depressed Chinese patients using item response theory: an examination of item properties, measurement precision and score comparability
published_or_final_versio
Optimal Capacitive Load Matching of Micro Electret Power Generators
This paper presents a model of micro-electret power generators. This model uses two capacitors with fixed charge density and variable area to model the actual micro electret power generator. Simulations of power output with capacitive loads and resistive loads are presented. The power output decreases as the load capacitance increases while it increases as the resistive load increases. To verify the model and simulation results, power output generation experiments are performed and the results confirm the simulation. To collect useful energy from the power generator, a small capacitive load, rather than a resistive load, is required
Numerical methods for analyzing electromagnetic scattering
Numerical methods to analyze electromagnetic scattering are presented. The dispersions and attenuations of the normal modes in a circular waveguide coated with lossy material were completely analyzed. The radar cross section (RCS) from a circular waveguide coated with lossy material was calculated. The following is observed: (1) the interior irradiation contributes to the RCS much more than does the rim diffraction; (2) at low frequency, the RCS from the circular waveguide terminated by a perfect electric conductor (PEC) can be reduced more than 13 dB down with a coating thickness less than 1% of the radius using the best lossy material available in a 6 radius-long cylinder; (3) at high frequency, a modal separation between the highly attenuated and the lowly attenuated modes is evident if the coating material is too lossy, however, a large RCS reduction can be achieved for a small incident angle with a thin layer of coating. It is found that the waveguide coated with a lossy magnetic material can be used as a substitute for a corrugated waveguide to produce a circularly polarized radiation yield
Numerical methods for analyzing electromagnetic scattering
Attenuation properties of the normal modes in an overmoded waveguide coated with a lossy material were analyzed. It is found that the low-order modes, can be significantly attenuated even with a thin layer of coating if the coating material is not too lossy. A thinner layer of coating is required for large attenuation of the low-order modes if the coating material is magnetic rather than dielectric. The Radar Cross Section (RCS) from an uncoated circular guide terminated by a perfect electric conductor was calculated and compared with available experimental data. It is confirmed that the interior irradiation contributes to the RCS. The equivalent-current method based on the geometrical theory of diffraction (GTD) was chosen for the calculation of the contribution from the rim diffraction. The RCS reduction from a coated circular guide terminated by a PEC are planned schemes for the experiments are included. The waveguide coated with a lossy magnetic material is suggested as a substitute for the corrugated waveguide
Wave attenuation and mode dispersion in a waveguide coated with lossy dielectric material
The modal attenuation constants in a cylindrical waveguide coated with a lossy dielectric material are studied as functions of frequency, dielectric constant, and thickness of the dielectric layer. A dielectric material best suited for a large attenuation is suggested. Using Kirchhoff's approximation, the field attenuation in a coated waveguide which is illuminated by a normally incident plane wave is also studied. For a circular guide which has a diameter of two wavelengths and is coated with a thin lossy dielectric layer (omega sub r = 9.1 - j2.3, thickness = 3% of the radius), a 3 dB attenuation is achieved within 16 diameters
Larkin-Ovchinnikov-Fulde-Ferrell phase in the superconductor (TMTSF)2ClO4: Theory versus experiment
We consider a formation of the Larkin-Ovchinnikov-Fulde-Ferrell (LOFF) phase
in a quasi-one-dimensional (Q1D) conductor in a magnetic field, parallel to its
conducting chains, where we take into account both the paramagnetic
spin-splitting and orbital destructive effects against superconductivity. We
show that, due to a relative weakness of the orbital effects in a Q1D case, the
LOFF phase appears in (TMTSF)ClO superconductor for real values of its
Q1D band parameters. We compare our theoretical calculations with the recent
experimental data by Y. Maeno's group [S. Yonezawa et al., Phys. Rev. Lett.
\textbf{100}, 117002 (2008)] and show that there is a good qualitative and
quantitative agreement between the theory and experimental data.Comment: 4 pages, 1 figur
- …