Integration of a Fire Detector into a Spacecraft

A detector sensitive to only the ultraviolet radiation emitted by flames has been selected as the basic element of the NASA Skylab fire detection system. It is sensitive to approximately 10(exp -12)W of radiation and will detect small flames at distances in excess of 3m. The performance of the detector was verified by experiments in an aircraft flying zero-gravity parabolas to simulate the characteristics of a fire which the detector must sense. Extensive investigation and exacting design was necessary to exclude all possible sources of false alarms. Optical measurements were made on all the spacecraft windows to determine the amount of solar radiation transmitted. The lighting systems and the onboard experiments also were appraised for ultraviolet emissions. Proton-accelerator tests were performed to determine the interaction of the Earth's trapped radiation belts with the detectors and the design of the instrument was modified to negate these effects

Evaluation and study of advanced optical contamination, deposition, measurement, and removal techniques

A program is described to design, fabricate and install an experimental work chamber assembly (WCA) to provide a wide range of experimental capability. The WCA incorporates several techniques for studying the kinetics of contaminant films and their effect on optical surfaces. It incorporates the capability for depositing both optical and contaminant films on temperature-controlled samples, and for in-situ measurements of the vacuum ultraviolet reflectance. Ellipsometer optics are mounted on the chamber for film thickness determinations, and other features include access ports for radiation sources and instrumentation. Several supporting studies were conducted to define specific chamber requirements, to determine the sensitivity of the measurement techniques to be incorporated in the chamber, and to establish procedures for handling samples prior to their installation in the chamber. A bibliography and literature survey of contamination-related articles is included

Flame detector operable in presence of proton radiation

A detector of ultraviolet radiation for operation in a space vehicle which orbits through high intensity radiation areas is described. Two identical ultraviolet sensor tubes are mounted within a shield which limits to acceptable levels the amount of proton radiation reaching the sensor tubes. The shield has an opening which permits ultraviolet radiation to reach one of the sensing tubes. The shield keeps ultraviolet radiation from reaching the other sensor tube, designated the reference tube. The circuitry of the detector subtracts the output of the reference tube from the output of the sensing tube, and any portion of the output of the sensing tube which is due to proton radiation is offset by the output of the reference tube. A delay circuit in the detector prevents false alarms by keeping statistical variations in the proton radiation sensed by the two sensor tubes from developing an output signal

Polymer electrolytes based on modified natural rubber

Modified natural rubber polymer hosts having low transition glass temperatures have been investigated for use in polymer electrolytes. Two types of modified natural rubber, namely 25% epoxidised natural rubber (ENR-25) and 50% epoxidised natural rubber (ENR-50) were employed in conjunction with poly(ethylene oxide), PEO. Results are reported for ionic conductivity and thermal properties for both unplasticized and plasticized polymer electrolyte systems with lithium triflate. The samples were in the form of free standing films with the thickness 0.2–0.5 mm and mixtures of ethylene carbonate (EC) and propylene carbonate (PC) were used as plasticizers. Unplasticized modified natural rubber-based systems exhibit ionic conductivities in the range 10−6 to 10−5 S cm−1 at ambient temperatures. Incorporating 100% of EC/PC by weight fraction of polymer (ENR/PEO) to the systems yielded mechanically stable films and ionic conductivities in the range of 10−4 S cm−1 at ambient temperature

The Distance to Nova V959 Mon from VLA Imaging

Determining reliable distances to classical novae is a challenging but crucial step in deriving their ejected masses and explosion energetics. Here we combine radio expansion measurements from the Karl G. Jansky Very Large Array with velocities derived from optical spectra to estimate an expansion parallax for nova V959 Mon, the first nova discovered through its gamma-ray emission. We spatially resolve the nova at frequencies of 4.5-36.5 GHz in nine different imaging epochs. The first five epochs cover the expansion of the ejecta from 2012 October to 2013 January, while the final four epochs span 2014 February to 2014 May. These observations correspond to days 126 through 199 and days 615 through 703 after the first detection of the nova. The images clearly show a non-spherical ejecta geometry. Utilizing ejecta velocities derived from 3D modelling of optical spectroscopy, the radio expansion implies a distance between 0.9 +/- 0.2 and 2.2 +/- 0.4 kpc, with a most probable distance of 1.4 +/- 0.4 kpc. This distance implies a gamma-ray luminosity much less than the prototype gamma-ray-detected nova, V407 Cyg, possibly due to the lack of a red giant companion in the V959 Mon system. V959 Mon also has a much lower gamma-ray luminosity than other classical novae detected in gamma-rays to date, indicating a range of at least a factor of 10 in the gamma-ray luminosities for these explosions.Comment: 11 pages, 8 figures, 3 tables, submitted to ApJ 2015-01-21, under revie

Synchrotron emission from double-peaked radio light curves of the symbiotic recurrent nova V3890 Sagitarii

We present radio observations of the symbiotic recurrent nova V3890 Sagitarii following the 2019 August eruption obtained with the MeerKAT radio telescope at 1.28 GHz and Karl G. Janksy Very Large Array (VLA) at 1.26 to 5 GHz. The radio light curves span from day 1 to 540 days after eruption and are dominated by synchrotron emission produced by the expanding nova ejecta interacting with the dense wind from an evolved companion in the binary system. The radio emission is detected early on (day 6) and increases rapidly to a peak on day 15. The radio luminosity increases due to a decrease in the opacity of the circumstellar material in front of the shocked material and fades as the density of the surrounding medium decreases and the velocity of the shock decelerates. Modelling the light curve provides an estimated mass-loss rate of $M_{\textrm {wind}} \approx 10^{-8} {\textrm {M}}_\odot~{\textrm {yr}}^{-1}$ from the red giant star and ejecta mass in the range of $M_{\textrm {ej}}=10^{-5}-10^{-6}~{\textrm {M}}_\odot$from the surface of the white dwarf. V3890 Sgr likely hosts a massive white dwarf similar to other symbiotic recurrent novae, thus considered a candidate for supernovae type Ia (SNe Ia) progenitor. However, its radio flux densities compared to upper limits for SNe Ia have ruled it out as a progenitor for SN 2011fe

An exploration of concepts of community through a case study of UK university web production

The paper explores the inter-relation and differences between the concepts of occupational community, community of practice, online community and social network. It uses as a case study illustration the domain of UK university web site production and specifically a listserv for those involved in it. Different latent occupational communities are explored, and the potential for the listserv to help realize these as an active sense of community is considered. The listserv is not (for most participants) a tight knit community of practice, indeed it fails many criteria for an online community. It is perhaps best conceived as a loose knit network of practice, valued for information, implicit support and for the maintenance of weak ties. Through the analysis the case for using strict definitions of the theoretical concepts is made

Plasmas and Controlled Nuclear Fusion

Contains reports on thirteen research projects split into three sections.National Science Foundation (Grant GK-2581

Applied Plasma Research

Contains reports on three research projects.National Science Foundation (Grant GK-18185)M. I. T. Lincoln Laboratory Purchase Order No. CC-55

Middle Neolithic pits and a burial at West Amesbury, Wiltshire

Excavations on the south-eastern slopes of King Barrow Ridge, 1.5 km east of Stonehenge, revealed five pits, a grave and other features of Middle Neolithic date. Analysis of the pit assemblages and the partial inhumation interred in the grave has provided insights into lifeways in this landscape in the late fourth millennium cal BC. Evidence suggests that the area was visited by a pastoralist, mobile community on a semi-regular basis for a significant period, in late autumn or winter. Selected remnants of craft-working and consumption were deposited in pits, before deliberate infilling. These depositions repeatedly memorialised activity on the hillside at a time of contemporary activity elsewhere on King Barrow Ridge and at the future site of Stonehenge. Middle Neolithic pits are present in significant numbers across King Barrow Ridge, and alongside pits in the Durrington area, form one of the densest concentrations of such activity in the region. Long distance mobility is suggested by the possible Irish origins of the inhumation, the first Middle Neolithic individual excavated in the environs of Stonehenge. Whilst of significance for understanding the Middle Neolithic in the WHS and the region, this research also hints at the roots of Late Neolithic monumentalisation of this landscape