Mechanically Triggered Polymer Deconstruction through Mechanoacid Generation and Catalytic Enol Ether Hydrolysis

Polymers that amplify a transient external stimulus into changes in their morphology, physical state, or properties continue to be desirable targets for a range of applications. Here, we report a polymer comprising an acid-sensitive, hydrolytically unstable enol ether backbone onto which is embedded gem-dichlorocyclopropane (gDCC) mechanophores through a single postsynthetic modification. The gDCC mechanophore releases HCl in response to large forces of tension along the polymer backbone, and the acid subsequently catalyzes polymer deconstruction at the enol ether sites. Pulsed sonication of a 61 kDa PDHF with 77% gDCC on the backbone in THF with 100 mM H2O for 10 min triggers the subsequent degradation of the polymer to a final molecular weight of less than 3 kDa after 24 h of standing, whereas controls lacking either the gDCC or the enol ether reach final molecular weights of 38 and 27 kDa, respectively. The process of sonication, along with the presence of water and the existence of gDCC on the backbone, significantly accelerates the rate of polymer chain deconstruction. Both acid generation and the resulting triggered polymer deconstruction are translated to bulk, cross-linked polymer networks. Networks formed via thiol–ene cross-linking and subjected to unconstrained quasi-static uniaxial compression dissolve on time scales that are at least 3 times faster than controls where the mechanophore is not covalently coupled to the network. We anticipate that this concept can be extended to other acid-sensitive polymer networks for the stress-responsive deconstruction of gels and solvent-free elastomers

Solvent Polarity Effects on the Mechanochemistry of Spiropyran Ring Opening

The spiropyran mechanophore (SP) is employed as a reporter of molecular tension in a wide range of polymer matrices, but the influence of surrounding environment on the force-coupled kinetics of its ring opening has not been quantified. Here, we report single-molecule force spectroscopy studies of SP ring opening in five solvents that span normalized Reichardt solvent polarity factors (ETN) of 0.1–0.59. Individual multimechanophore polymers were activated under increasing tension at constant 300 nm s–1 displacement in an atomic force microscope. The extension results in a plateau in the force–extension curve, whose midpoint occurs at a transition force f* that corresponds to the force required to increase the rate constant of SP activation to approximately 30 s–1. More polar solvents lead to mechanochemical reactions that are easier to trigger; f* decreases across the series of solvents, from a high of 415 ± 13 pN in toluene to a low of 234 ± 9 pN in n-butanol. The trend in mechanochemical reactivity is consistent with the developing zwitterionic character on going from SP to the ring-opened merocyanine product. The force dependence of the rate constant (Δx‡) was calculated for all solvent cases and found to increase with ETN, which is interpreted to reflect a shift in the transition state to a later and more productlike position. The inferred shift in the transition state position is consistent with a double-well (two-step) reaction potential energy surface, in which the second step is rate determining, and the intermediate is more polar than the product

Coumarin Dimer Is an Effective Photomechanochemical AND Gate for Small-Molecule Release.

Stimulus-responsive gating of chemical reactions is of considerable practical and conceptual interest. For example, photocleavable protective groups and gating mechanophores allow the kinetics of purely thermally activated reactions to be controlled optically or by mechanical load by inducing the release of small-molecule reactants. Such release only in response to a sequential application of both stimuli (photomechanochemical gating) has not been demonstrated despite its unique expected benefits. Here, we describe computational and experimental evidence that coumarin dimers are highly promising moieties for realizing photomechanochemical control of small-molecule release. Such dimers are transparent and photochemically inert at wavelengths >300 nm but can be made to dissociate rapidly under tensile force. The resulting coumarins are mechanochemically and thermally stable, but rapidly release their payload upon irradiation. Our DFT calculations reveal that both strain-free and mechanochemical kinetics of dimer dissociation are highly tunable over an unusually broad range of rates by simple substitution. In head-to-head dimers, the phenyl groups act as molecular levers to allow systematic and predictable variation in the force sensitivity of the dissociation barriers by choice of the pulling axis. As a proof-of-concept, we synthesized and characterized the reactivity of one such dimer for photomechanochemically controlled release of aniline and its application for controlling bulk gelation

Multiresponsive supramolecular gels constructed by orthogonal metal-ligand coordination and hydrogen bonding

National Natural Science Foundation of China [21074103]; Fundamental Research Funds for the Central Universities [2010121018]; Scientific Research Foundation for Returned ScholarsMacromonomers bearing tridentate 2,6-bis(1,2,3-trizol-4-yl)pyridine (BTP) ligand unit synthesized via CuAAC "click" chemistry in the middle of the chain and two ureidopyrimidinone (UPy) motifs on the ends linked to the central BTP unit via PEGs of various lengths were synthesized and used for the study of gelation both with and without the presence of Eu(III) ions. Various interesting gelation behaviors were found. Gels exhibited various multi-responsive properties, including photoluminescence, mechanoresponsive properties, self-healing abilities, thermorepsonsive properties and chemoresponsive properties. The different gelation abilities and multi-responsive properties for different systems were shown to be resulted from difference in PEG linker lengths and the introduction of orthogonal metal-ligand coordination and hydrogen bonding interactions. The selective responsiveness to different chemicals would allow the development of modular sensory systems that utilize a combination of orthogonal supramolecular interactions. (C) 2013 Elsevier Ltd. All rights reserved

Impact of Molecular Design on Degradation Lifetimes of Degradable Imine-Based Semiconducting Polymers

Transient electronics are a rapidly emerging field due to their potential applications in the environment and human health. Recently, a few studies have incorporated acid-labile imine bonds into polymer semiconductors to impart transience; however, understanding of the structure–degradation property relationships of these polymers is limited. In this study, we systematically design and characterize a series of fully degradable diketopyrrolopyrrole-based polymers with engineered sidechains to investigate the impact of several molecular design parameters on the degradation lifetimes of these polymers. By monitoring degradation kinetics via ultraviolet–visible spectroscopy, we reveal that polymer degradation in solution is aggregation-dependent based on the branching point and Mn, with accelerated degradation rates facilitated by decreasing aggregation. Additionally, increasing the hydrophilicity of the polymers promotes water diffusion and therefore acid hydrolysis of the imine bonds along the polymer backbone. The aggregation properties and degradation lifetimes of these polymers rely heavily on solvent, with polymers in chlorobenzene taking six times as long to degrade as in chloroform. We develop a new method for quantifying the degradation of polymers in the thin film and observe that similar factors and considerations (e.g., interchain order, crystallite size, and hydrophilicity) used for designing high-performance semiconductors impact the degradation of imine-based polymer semiconductors. We found that terpolymerization serves as an attractive approach for achieving degradable semiconductors with both good charge transport and tuned degradation properties. This study provides crucial principles for the molecular design of degradable semiconducting polymers, and we anticipate that these findings will expedite progress toward transient electronics with controlled lifetimes

Mechanical Activation of Mechanophore Enhanced by Strong Hydrogen Bonding Interactions

A mechanically active spiropyran (SP) mechanophore is incorporated into the backbone of prepolymer which is further end-capped with ureidopyrimidinone (UPy) or urethane. Strong mechanochromic reaction of SP arises in the bulk films of UPy containing materials whereas much weaker activation occurs in urethane containing counterparts, coincident with their stress–strain responses. The difference in the magnitudes of supramolecular interactions leads to different degrees of chain orientation and strain induced crystallization (SIC) in the bulk and consequently distinct capabilities to transfer the load to the mechanophores. This study may aid the design of novel mechanoresponsive materials whose mechanoresponsiveness can be tailored by tuning supramolecular interactions

Biomimetic Modular Polymer with Tough and Stress Sensing Properties

Natural Science Foundation of China [21074103]; Fundamental Research Funds for the Central Universities [2010121018]; Scientific Research Foundation for Returned Scholars; NFFTBS [J1210014]With the aim of designing novel polymeric materials that exhibit superb mechanical performance and at the same time can sense stress, the hydrogen bonding ureidopyrimidinone (UPy) and covalent mechanochromic spiropyran (SP) are incorporated into one polymer structure to program the mechanical and mechanochemical responses of the materials. Excellent correlation between the molecular and microscopic structures and the macroscopic properties has been successfully demonstrated. Tensile tests reveal a combination of excellent mechanical properties, that is, high strength, high elongation at break, and high toughness. The superior mechanical properties are shown to be the consequence of the successive fragmentation of the hard domains formed by stacks of UPy dimers and the dissociations of UPy diners. Stress sensing before catastrophic failure is also readily achieved in the form of color changing, which coincides with the strain hardening event. Studies show that the fragmentation and dissociation events occur before the mechanical activation of SP

Multi-modal mechanophores based on cinnamate dimers

Mechanochemistry offers exciting opportunities for molecular-level engineering of stress-responsive properties of polymers. Reactive sites, sometimes called mechanophores, have been reported to increase the material toughness, to make the material mechanochromic or optically healable. Here we show that macrocyclic cinnamate dimers combine these productive stress-responsive modes. The highly thermally stable dimers dissociate on the sub-second timescale when subject to a stretching force of 1–2 nN (depending on isomer). Stretching a polymer of the dimers above this force more than doubles its contour length and increases the strain energy that the chain absorbs before fragmenting by at least 600 kcal per mole of monomer. The dissociation produces a chromophore and dimers are reformed upon irradiation, thus allowing optical healing of mechanically degraded parts of the material. The mechanochemical kinetics, single-chain extensibility, toughness and potentially optical properties of the dissociation products are tunable by synthetic modifications

Impact of Fluorination Degree of Ether-Based Electrolyte Solvent on Li-metal Battery Performance

Electrolytes using fluorinated solvents have proven effective in improving the cycling life of Li-metal batteries, by forming a robust solid-electrolyte interphase through decomposition of anion and fluorinated solvent molecules. Herein, we modulated the fluorination degree of ether-based electrolyte solvents to investigate their performance in Li-metal batteries. We tuned the fluorination degree by installing a monofluorine substituent on one ethoxy group of 1,2-diethoxyethane (DEE) and varying the fluorination degree on the other one, providing three fluorinated DEE solvent molecules (i.e., F1F0, F1F1 and F1F2) with a relatively low fluorination degree. All the three electrolytes showed improved solvation strength and ionic conductivities compared with previous highly fluorinated DEE elec-trolytes, while retaining good oxidative stability. Full cell test using Li-metal anode and nickel-rich cathode revealed that a higher degree of fluorination is beneficial to the cycling performance, and the cycling stability follows F1F0 < F1F1 < F1F2. Specifically, F1F0 exhibited poor cycling stability due to its instability against both anode and cathode. While F1F1 and F1F2 both showed good stability against Li-metal anode, their relative long-term oxidative stability was responsive for the distinct performance, in which the cycle numbers at 80% capacity retention for F1F1 and F1F2 were ~20 and ~80, respectively. This work shows the importance to modulate the fluorination degree of elec-trolyte solvents, and this approach is suitable for various cathode materials