103 research outputs found

    Master of Science

    Get PDF
    thesisIn 2014, there were 17,791 fatalities as a result of roadway departure crashes in the U.S., representing 54% of all traffic fatalities in the U.S. Roadway departure crashes account for approximately 52%of traffic fatalities in the state of Utah. A significant number of roadway departure crashes occur on horizontal curves along rural, two-lane highways. Previous research has indicated that providing "consistent" designs that are compatible with driver expectations and capabilities can reduce the number of roadway departure crashes at these locations. Various measures of design consistency have been proposed to quantify the levels by which a road design meets driver expectations and capabilities, including speed differentials, alignment indices, and visual demand/work load estimates. Among them, alignment indices have been proven as direct design consistency measures to analyze crash frequency. The objective of this research was to estimate relationships between the expected frequency of horizontal curve roadway departure crashes and geometric design consistency, characterized by using alignment indices along rural, two-lane highways in Utah. Negative binomial and zero-inflated negative binomial regression models were estimated which relate expected frequencies of roadway departure crashes to design and traffic characteristics of the rural, two-lane road segments. The dataset consists of 578 horizontal curves with corresponding design and traffic information, as well as characteristics of the upstream and downstream tangents and curves. Horizontal alignment indices, curve lengths, average daily traffic volumes (ADTs), and general geometric variables were tested in the model specifications. To build the dataset for model estimation, roadway features were gathered along rural, two-lane state routes in Utah using the Utah Department of Transportation's LIDAR files. Crash data were also provided by the Utah Department of Transportation for these same routes and spanned the years 2008 through 2014. Eventually, the best two models were explored in this study. One model included the following parameters: the natural logarithm of average annual daily traffic, the changed radius rate, vertical curvature change rate, maximum change in degree of curvature, indicator variable for the presence of a vertical curve on a horizontal curve, and average grade. The other model had the same variables as the first model, but the ratio of average radius over radii replaced the changed radius rate and the average change in degree of curvature replaced the maximum change in degree of curvature

    Reflectors in upper mantle above the deep earthquakes.

    Get PDF
    Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Earth and Planetary Science, 1974.Bibliography: leaves 118-124.M.S

    Early Response Assessment after Intraarterial Therapy Using 3D Quantitative Tumor Enhancement Analysis

    Get PDF
    PURPOSE Liver metastases from renal cell carcinoma (RCC) are not uncommon in the course of disease. However, data about tumor response to intraarterial therapy (IAT) are scarce. This study assessed whether changes of enhancing tumor volume using quantitative European Association for the Study of the Liver (qEASL) on magnetic resonance imaging (MRI) and computed tomography (CT) can evaluate tumor response and predict overall survival (OS) early after therapy. METHODS AND MATERIALS Fourteen patients with liver metastatic RCC treated with IAT (transarterial chemoembolization: n= 9 and yttrium-90: n= 5) were retrospectively included. All patients underwent contrast-enhanced imaging (MRI: n= 10 and CT: n= 4) 3 to 4 weeks pre- and posttreatment. Response to treatment was evaluated on the arterial phase using Response Evaluation Criteria in Solid Tumors (RECIST), World Health Organization, modified RECIST, EASL, tumor volume, and qEASL. Paired t test was used to compare measurements pre- and post-IAT. Patients were stratified into responders (≥65% decrease in qEASL) and nonresponders (<65% decrease in qEASL). OS was evaluated using Kaplan-Meier curves with log-rank test and the Cox proportional hazard model. RESULTS Mean qEASL (cm3) decreased from 93.5 to 67.2 cm3 (P= .004) and mean qEASL (%) from 63.1% to 35.6% (P= .001). No significant changes were observed using other response criteria. qEASL was the only significant predictor of OS when used to stratify patients into responders and nonresponders with median OS of 31.9 versus 11.1 months (hazard ratio [HR], 0.43; 95% confidence interval [CI], 0.19-0.97; P= .042) for qEASL (cm3) and 29.9 versus 10.2 months (HR, 0.09; 95% CI, 0.01-0.74; P= .025) for qEASL (%). CONCLUSION Three-dimensional (3D) quantitative tumor analysis is a reliable predictor of OS when assessing treatment response after IAT in patients with RCC metastatic to the liver. qEASL outperforms conventional non- 3D methods and can be used as a surrogate marker for OS early after therapy

    Renal Cell Carcinoma Metastatic to the Liver: Early Response Assessment after Intraarterial Therapy Using 3D Quantitative Tumor Enhancement Analysis

    Get PDF
    AbstractPURPOSELiver metastases from renal cell carcinoma (RCC) are not uncommon in the course of disease. However, data about tumor response to intraarterial therapy (IAT) are scarce. This study assessed whether changes of enhancing tumor volume using quantitative European Association for the Study of the Liver (qEASL) on magnetic resonance imaging (MRI) and computed tomography (CT) can evaluate tumor response and predict overall survival (OS) early after therapy.METHODS AND MATERIALSFourteen patients with liver metastatic RCC treated with IAT (transarterial chemoembolization: n= 9 and yttrium-90: n= 5) were retrospectively included. All patients underwent contrast-enhanced imaging (MRI: n= 10 and CT: n= 4) 3 to 4 weeks pre- and posttreatment. Response to treatment was evaluated on the arterial phase using Response Evaluation Criteria in Solid Tumors (RECIST), World Health Organization, modified RECIST, EASL, tumor volume, and qEASL. Paired t test was used to compare measurements pre- and post-IAT. Patients were stratified into responders (≥65% decrease in qEASL) and nonresponders (<65% decrease in qEASL). OS was evaluated using Kaplan-Meier curves with log-rank test and the Cox proportional hazard model.RESULTSMean qEASL (cm3) decreased from 93.5 to 67.2 cm3 (P= .004) and mean qEASL (%) from 63.1% to 35.6% (P= .001). No significant changes were observed using other response criteria. qEASL was the only significant predictor of OS when used to stratify patients into responders and nonresponders with median OS of 31.9 versus 11.1 months (hazard ratio [HR], 0.43; 95% confidence interval [CI], 0.19-0.97; P= .042) for qEASL (cm3) and 29.9 versus 10.2 months (HR, 0.09; 95% CI, 0.01-0.74; P= .025) for qEASL (%).CONCLUSIONThree-dimensional (3D) quantitative tumor analysis is a reliable predictor of OS when assessing treatment response after IAT in patients with RCC metastatic to the liver. qEASL outperforms conventional non-3D methods and can be used as a surrogate marker for OS early after therapy

    The positivity rates and drug resistance patterns of Mycobacterium tuberculosis using nucleotide MALDI-TOF MS assay among suspected tuberculosis patients in Shandong, China: a multi-center prospective study

    Get PDF
    ObjectiveTo investigate the positivity rates and drug resistance characteristics of Mycobacterium tuberculosis (MTB) among suspected tuberculosis (TB) patients in Shandong Province, the second-largest population province in China.MethodsA prospective, multi-center study was conducted from April 2022 to June 2023. Pathogen and drug resistance were identified using nucleotide matrix-assisted laser desorption ionization time-of-flight mass spectrometry (nucleotide MALDI-TOF MS).ResultsOf 940 suspected TB patients included in this study, 552 cases were found to be infected with MTB giving an overall positivity rate of 58.72%. Total of 346 cases were resistant to arbitrary anti-TB drug (62.68%), with Zibo (76.47%), Liaocheng and Weihai (both 69.23%) ranking top three and TB treatment history might be a related factor. Monoresistance was the most common pattern (33.53%), with isoniazid the highest at 12.43%, followed by rifampicin at 9.54%. Further analysis of gene mutations conferring resistance revealed diverse types with high heteroresistance rate found in multiple anti-TB drugs.ConclusionA relatively high rate of MTB positivity and drug resistance was found in Shandong Province during and after the COVID-19 pandemic, indicating the need for strengthening rapid identification of species and drug resistance among suspected TB patients to guide better medication and minimize the occurrence of drug resistance

    Temperature and Electric Field Distribution Characteristics of a DC-GIL Basin-Type Spacer with 3D Modelling and Simulation

    No full text
    The temperature properties of real-type direct-current gas-insulated transmission lines (DC-GIL) with a basin-type spacer were investigated by the finite element method in this paper. A horizontally installed model was established and the temperature distribution was obtained with a 3D model. The specific heat capacity and thermal conductivity of the spacer were measured and applied in the simulation. The results show that the temperature of the convex surface was slightly higher than that of the concave surface. With an increase in the SF6 pressure, the temperature of the spacer decreased, which can be attributed to the improvement of convection due to increases in the heat capacity per unit volume. With an increase in the ambient temperature, the temperature of the spacer increased linearly. The temperature difference between the inner and outer parts of the spacer increased with increases in the load current. Besides, an obvious increase in the surface electric field strength appeared under the influence of the thermal gradient compared to the results without the thermal gradient. Thus, special attention should be paid to the insulation properties of the spacer considering the influence of temperature distribution. This study evaluates both the thermal and insulation characteristics of the GIL along with the spacer under various conditions
    corecore