Thermal stability of linear siloxanes and their mixtures

The working fluid thermal stability is one of the crucial features of an effective organic Rankine cycle. Hexamethyldisiloxane (MM -C6H18OSi2) and octamethyltrisiloxane (MDM -C8H24O2Si3) are siloxane fluids currently exploited in high temperature organic Rankine cycles. However, data about their thermal stability are scarce or absent in literature. This manuscript presents a study of their behavior and decomposition at operating temperatures in the range 270 - 420 degrees C. The assessment of thermal stability can be performed with several methods, which are either based on pressure anomalous variation in isothermal stresses or on the deviation of the saturation curves experimentally obtained before and after the fluid is thermally stressed. An enhanced method is proposed here, based on chemical analysis of both vapor and liquid phases of the sample before and after it is subjected to thermal stress. A comparison of the pre-and post-stress vapor-liquid equilibrium curve complements the analysis. Results proved a higher stability for MM than for MDM. Moreover, due to the current interest in applying mixtures in organic Rankine cycles, an equimolar mixture of MM and MDM was also tested, which exhibit a behavior that appears to be different from the simple superimposition of pure fluid ones

Design and commissioning of a thermal stability test-rig for mixtures as working fluids for ORC applications

Abstract A novel test-rig for studying the thermal stability of mixtures as working fluids for ORC applications was designed and commissioned at the Laboratory of Compressible-fluid dynamics for Renewable Energy Applications (CREA) of Politecnico di Milano, in collaboration with the University of Brescia. The set-up is a standard one, in which a vessel containing the fluid under scrutiny is placed in a vertical oven for ~ 100 hours at a constant temperature T = Tstress. During the test, the pressure P is monitored to detect thermal decomposition of the fluid. After the test, the vessel is placed in a controlled thermal bath, where the pressure is measured at different value of the temperature T, with