Mechanical testing of copper and copper alloy micropillars containing a single twin boundary

Nanotwinned metals are a promising class of modern materials combining a very high strength with a high ductility and excellent electrical properties. This remarkable strength is believed to be connected to the good efficiency of twin boundaries as obstacles to dislocation motion. The present study aims at identifying and characterizing the possible interaction modes between dislocations and coherent twin boundaries. This is achieved by compressing micropillars containing a single twin boundary of a controlled orientation. The influence of the stacking fault energy on the intrinsic strength of the twin boundary is also investigated by varying the investigated material. In detail, the micropillars are fabricated from recrystallized polycrystalline samples of copper and α-brass, which is a low stacking-fault energy alloy exhibiting a high density of recrystallization twins. Coherent twin boundaries are selected from an EBSD orientation mapping of the sample and oriented by means of a custom 3D-printed sample holder. FIB-milling at these interfaces yields micropillar specimens containing a single twin boundary. Single crystalline reference samples are obtained from the bulk of the grains located on both sides of the twin boundary. The microcompression tests allow quantifying the influence of the twin boundary barrier on the strength of the sample as a function of the stacking fault energy of the material. The activated glide systems are subsequently identified from slip trace analysis and STEM mapping of lamellas obtained by lift-off from the bulk of the tested micropillars. This allows identifying the different deformation modes, which will be discussed in the presentation

Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films

The microstructure contribution to the very low fracture toughness of freestanding metallic thin films was investigated by bulge fracture tests on 200-nm-thick {100} single-crystalline and polycrystalline silver films. The single-crystalline films exhibited a significantly lower fracture toughness value (KIC= 0.88 MPa m1/2) than their polycrystalline counterparts (KIC= 1.45 MPa m1/2), which was rationalized by the observation of an unusual crack initiation behavior—characterized by twinning in front of the notch tip—during in situ testing in the atomic force microscope. Twinning was also observed as a dominant deformation mechanism in atomistic simulations. This twinning tendency is explained by comparing the resolved shear stresses acting on the leading partial dislocation and the full dislocation, which allows to develop a size- and orientation-dependent twinning criterion. The fracture toughness of polycrystalline samples was found to be higher because of the energy dissipation associated with full dislocation plasticity and because of crack meandering along grain boundaries

Cerebral attenuation on single-phase CT angiography source images: Automated ischemia detection and morphologic outcome prediction after thrombectomy in patients with ischemic stroke

Objectives: Stroke triage using CT perfusion (CTP) or MRI gained importance after successful application in recent trials on late-window thrombectomy but is often unavailable and time-consuming. We tested the clinical value of software-based analysis of cerebral attenuation on Single-phase CT angiography source images (CTASI) as CTP surrogate in stroke patients. Methods: Software-based automated segmentation and Hounsfield unit (HU) measurements for all regions of the Alberta Stroke Program Early CT Score (ASPECTS) on CTASI were performed in patients with large vessel occlusion stroke who underwent thrombectomy. To normalize values, we calculated relative HU (rHU) as ratio of affected to unaffected hemisphere. Ischemic regions, regional ischemic core and final infarction were determined on simultaneously acquired CTP and follow-up imaging as ground truth. Receiver operating characteristics analysis was performed to calculate the area-under-the-curve (AUC). Resulting cut-off values were used for comparison with visual analysis and to calculate an 11-point automated CTASI ASPECTS. Results: Seventy-nine patients were included. rHU values enabled significant classification of ischemic involvement on CTP in all ten regions of the ASPECTS (each p<0.001, except M4-cortex p = 0.002). Classification of ischemic core and prediction of final infarction had best results in subcortical regions but produced lower AUC values with significant classification for all regions except M1, M3 and M5. Relative total hemispheric attenuation provided strong linear correlation with CTP total ischemic volume. Automated classification of regional ischemia on CTASI was significantly more accurate in most regions and provided better agreement with CTP cerebral blood flow ASPECTS than visual assessment. Conclusions: Automated attenuation measurements on CTASI provide excellent performance in detecting acute ischemia as identified on CTP with improved accuracy compared to visual analysis. However, value for the approximation of ischemic core and morphologic outcome in large vessel occlusion stroke after thrombectomy was regionally dependent and limited. This technique has the potential to facilitate stroke imaging as sensitive surrogate for CTP-based ischemia

Performance of Automated Attenuation Measurements at Identifying Large Vessel Occlusion Stroke on CT Angiography

PURPOSE Computed tomography angiography (CTA) is routinely used to detect large-vessel occlusion (LVO) in patients with suspected acute ischemic stroke; however, visual analysis is time consuming and prone to error. To evaluate solutions to support imaging triage, we tested performance of automated analysis of CTA source images (CTASI) at identifying patients with LVO. METHODS Stroke patients with LVO were selected from a prospectively acquired cohort. A control group was selected from consecutive patients with clinically suspected stroke without signs of ischemia on CT perfusion (CTP) or infarct on follow-up. Software-based automated segmentation and Hounsfield unit (HU) measurements were performed on CTASI for all regions of the Alberta Stroke Program Early CT score (ASPECTS). We derived different parameters from raw measurements and analyzed their performance to identify patients with LVO using receiver operating characteristic curve analysis. RESULTS The retrospective analysis included 145 patients, 79 patients with LVO stroke and 66 patients without stroke. The parameters hemispheric asymmetry ratio (AR), ratio between highest and lowest regional AR and M2-territory AR produced area under the curve (AUC) values from 0.95-0.97 (all p < 0.001) for detecting presence of LVO in the total population. Resulting sensitivity (sens)/specificity (spec) defined by the Youden index were 0.87/0.97-0.99. Maximum sens/spec defined by the specificity threshold ≥0.70 were 0.91-0.96/0.77-0.83. Performance in a~small number of patients with isolated M2 occlusion was lower (AUC: 0.72-0.85). CONCLUSION Automated attenuation measurements on CTASI identify proximal LVO stroke patients with high sensitivity and specificity. This technique can aid in accurate and timely patient selection for thrombectomy, especially in primary stroke centers without CTP capacity

CT after interhospital transfer in acute ischemic stroke: Imaging findings and impact of prior intravenous contrast administration

Objectives: Large vessel occlusion (LVO) stroke patients routinely undergo interhospital transfer to endovascular thrombectomy capable centers. Imaging is often repeated with residual intravenous (IV) iodine contrast at post-transfer assessment. We determined imaging findings and the impact of residual contrast on secondary imaging. Anterior circulation LVO stroke patients were selected out of a consecutive cohort. Directly admitted patients were contrast naïve, and transferred patients had previously received IV iodine contrast for stroke assessment at the referring hospital. Two independent readers rated the visibility of residual contrast on non-contrast computed tomography (CT) after transfer and assessed the hyperdense vessel sign. Multivariate linear regression analysis was used to investigate the association of the Alberta Stroke Program Early CT score (ASPECTS) with prior contrast administration, time from symptom onset (TFSO), and CTP ischemic core volume in both directly admitted and transferred patients. Results: We included 161 patients, with 62 (39%) transferred and 99 (62%) directly admitted patients. Compared between these groups, transferred patients had a longer TFSO-to-imaging at our institution (median: 212 vs. 75 min, p < 0.001) and lower ASPECTS (median: 8 vs. 9, p < 0.001). Regression analysis presented an independent association of ASPECTS with prior contrast administration (β = −0.25, p = 0.004) but not with TFSO (β = −0.03, p = 0.65). Intergroup comparison between transferred and directly admitted patients pointed toward a stronger association between ASPECTS and CTP ischemic core volume in transferred patients (β = −0.39 vs. β = −0.58, p = 0.06). Detectability of the hyperdense vessel sign was substantially lower after transfer (66 vs. 10%, p < 0.001). Conclusion: Imaging alterations due to residual IV contrast are frequent in clinical practice and render the hyperdense vessel sign largely indetectable. Larger studies are needed to clarify the influence on the association between ASPECTS and ischemic core

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.

Energy dependence of Cronin momentum in saturation model for p+Ap+A and A+AA+A collisions

We calculate $\sqrt{s}$ dependence of Cronin momentum for $p+A$ and $A+A$ collisions in saturation model. We show that this dependence is consistent with expectation from formula which was obtained using simple dimentional consideration. This can be used to test validity of saturation model (and distinguish among its variants) and measure $x$ dependence of saturation momentum from experimental data.Comment: LaTeX2e, 12 pages, 8 figure

CP asymmetry in B→ϕKSB \to \phi K_S in a general two-Higgs-doublet model with fourth-generation quarks

We discuss the time-dependent CP asymmetry of decay $B \to \phi K_S$ in an extension of the Standard Model with both two Higgs doublets and additional fourth-generation quarks. We show that although the Standard Model with two-Higgs-doublet and the Standard model with fourth generation quarks alone are not likely to largely change the effective $\sin 2 \beta$ from the decay of $B \to \phi K_S$, the model with both additional Higgs doublet and fourth-generation quarks can easily account for the possible large negative value of $\sin 2 \beta$ without conflicting with other experimental constraints. In this model, additional large CP violating effects may arise from the flavor changing Yukawa interactions between neutral Higgs bosons and the heavy fourth generation down type quark, which can modify the QCD penguin contributions. With the constraints obtained from $b \to s \bar{s} s$ processes such as $B \to X_s \gamma$ and $\Delta m_{B_s^0}$, this model can lead to the effective $\sin 2 \beta$ to be as large as $- 0.4$ in the CP asymmetry of $B \to \phi K_S$.Comment: 13 pages, 5 figures, references added, to appear in Eur.Phys.J.

A Precise Measurement of the Tau Lifetime

The tau lepton lifetime has been measured with the e+e- -> tau+tau- events collected by the DELPHI detector at LEP in the years 1991-1995. Three different methods have been exploited, using both one-prong and three-prong tau decay channels. Two measurements have been made using events in which both taus decay to a single charged particle. Combining these measurements gave tau_tau (1 prong) = 291.8 +/- 2.3 (stat) +/- 1.5 (sys) fs. A third measurement using taus which decayed to three charged particles yielded tau_tau (3 prong) = 288.6 +/- 2.4 (stat) +/- 1.3 (sys) fs. These were combined with previous DELPHI results to measure the tau lifetime, using the full LEP1 data sample, to be tau_tau = 290.9 +/- 1.4 (stat) +/- 1.0 (sys) fs.Comment: 27 pages, 7 figure

Towards a collaborative research: A case study on linking science to farmers' perceptions and knowledge on Arabica coffee pests and diseases and its management

The scientific community has recognized the importance of integrating farmer's perceptions and knowledge (FPK) for the development of sustainable pest and disease management strategies. However, the knowledge gap between indigenous and scientific knowledge still contributes to misidentification of plant health constraints and poor adoption of management solutions. This is particularly the case in the context of smallholder farming in developing countries. In this paper, we present a case study on coffee production in Uganda, a sector depending mostly on smallholder farming facing a simultaneous and increasing number of socio-ecological pressures. The objectives of this study were (i) to examine and relate FPK on Arabica Coffee Pests and Diseases (CPaD) to altitude and the vegetation structure of the production systems; (ii) to contrast results with perceptions from experts and (iii) to compare results with field observations, in order to identify constraints for improving the information flow between scientists and farmers. Data were acquired by means of interviews and workshops. One hundred and fifty farmer households managing coffee either at sun exposure, under shade trees or inter-cropped with bananas and spread across an altitudinal gradient were selected. Field sampling of the two most important CPaD was conducted on a subset of 34 plots. The study revealed the following findings: (i) Perceptions on CPaD with respect to their distribution across altitudes and perceived impact are partially concordant among farmers, experts and field observations (ii) There are discrepancies among farmers and experts regarding management practices and the development of CPaD issues of the previous years. (iii) Field observations comparing CPaD in different altitudes and production systems indicate ambiguity of the role of shade trees. According to the locality-specific variability in CPaD pressure as well as in FPK, the importance of developing spatially variable and relevant CPaD control practices is proposed. (Résumé d'auteur