3,197 research outputs found
A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties
Ceramic tiles sealed using a portable 60 W-cw high power diode laser (HPDL) and a specially developed grout material having an impermeable enamel surface glaze have been tested in order to determine the mechanical, chemical and physical characteristics of the seals. The work showed that the generation of the enamel surface glaze resulted in a seal with improved mechanical and chemical properties over conventional epoxy tile grouts. Both epoxy tile grout and laser generated enamel seals were tested for compressive strength, surface roughness, wear, water permeability and acid/alkali resistance. The enamel seal showed clear improvements in strength, roughness and wear, whilst being impermeable to water, and resistance (up to 80% concentration) to nitric acid, sodium hydroxide and detergent acids. The bond strength and the rupture strength of the enamel seal were also investigated, revealing that the enamel adhered to the new grout and the ceramic tiles with an average bond strength of 45-60 MPa, whilst the rupture strength was comparable to the ceramic tiles themselves. The average surface roughness of the seals and the tiles was 0.36m and 0.06m respectively, whilst for the conventional epoxy grout the average surface roughness when polished was 3.83m, and in excess of 30m without polishing. Life assessment testing revealed that enamel seals had an increase in actual wear life of 2.9 to 30.4 times over conventional epoxy tile grout, depending upon the corrosive environment
A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics
Work has been conducted using a 60 W-cw high power diode laser (HPDL) in order to determine the feasibility and characteristics of sealing the void between adjoining ceramic tiles with a specially developed grout material having an impermeable enamel surface glaze. A two-stage process has been developed using a new grout material which consists of two distinct components: an amalgamated compound substrate and a glazed enamel surface; the amalgamated compound seal providing a tough, heat resistant bulk substrate, whilst the enamel provides an impervious surface. HPDL processing has resulted in crack free seals produced in normal atmospheric conditions. The basic process phenomena are investigated and the laser effects in terms of seal morphology, composition and microstructure are presented. Also, the resultant heat affects are analysed and described, as well as the effects of the shield gases, O2 and Ar, during laser processing. Tiles were successfully sealed with power densities as low as 500 W/cm2 and at rates up to 600 mm/min. Contact angle measurements revealed that due to the wettability characteristics of the amalgamated oxide compound grout (AOCG), laser surface treatment was necessary in order to alter the surface from a polycrystalline to a semi-amorphous structure, thus allowing the enamel to adhere. Bonding of the enamel to the AOCG and the ceramic tiles was identified as being principally due to van der Waals forces, and on a very small scale, some of the base AOCG material dissolving into the glaze
Diode laser modification of ceramic material surface properties for improved wettability and adhesion
To date, very little work has been published with regard specifically to the use of lasers for modifying the surface properties of materials in order to improve their wettability and adhesion characteristics. Using a 60 W high power diode laser (HPDL) the effects of HPDL radiation on the wettability and adhesion characteristics of certain ceramic materials have been determined. It was found that laser treatment of the materials surfaces’ modified the surface energy and accordingly, wetting experiments, by the sessile drop technique using a variety of test liquids, revealed that laser treatment of the range of ceramic materials surfaces resulted in a decrease in the contact angles. The work shows clearly that laser radiation can be used to alter the wetting and adhesion characteristics of a number of ceramic materials by means of changing the surface energy
Detection of eight different tospovirus species by a monoclonal antibody against the common epitope of NSs protein
Rabbit antisera against the nucleocapsid protein (NP) have been commonly used for detection of tospoviruses and classification into serogroups or serotypes. Mouse monoclonal antibodies (MAbs) with high specificity to the NPs have also been widely used to identify tospovirus species. Recently, a serogroup-specific MAb against the NSs protein of Watermelon silver mottle virus (WSMoV) was produced by our laboratory to react with five members of WSMoV serogroup, i.e., WSMoV, Capsicum chlorosis virus (CaCV), Calla lily chlorotic spot virus (CCSV), Peanut bud necrosis virus (PBNV) and Watermelon bud necrosis virus (WBNV). The epitope recognized by the NSs MAb was determined and the comparison with the reported sequences of tospoviral NSs proteins revealed that the epitope is highly conserved at the N-terminal region of NSs proteins among members of WSMoV and Iris yellow spot virus (IYSV) serogroups, and Melon yellow spot virus (MYSV) serotype. When the NSs MAb was further used to react with the crude antigens of MYSV serotype, IYSV and Tomato yellow ring virus (TYRV) of IYSV serogroup, strong serological reactions, both in ELISA and western blotting, were observed. Thus, our results indicated that the NSs MAb is a useful and convenient tool for detection of the eight tospovirus species. It is also suggested that these eight Asian-type tospoviruses, i.e., WSMoV, CaCV, CCSV, PBNV, WBNV, MYSV, IYSV and TYRV, may share a common evolutionary ancesto
Inferring a DNA sequence from erroneous copies
AbstractWe suggest a novel approach for efficiently reconstructing an original DNA sequence from erroneous copies
High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling
High power diode laser (HPDL) surface melting of a thin layer of an amalgamated Al2O3/SiO2 oxide
compound (AOC) resulted in significant changes in the wettability characteristics of the material.
This behaviour was identified as being primarily due to: (i) the polar component of the AOC surface
energy increasing after laser melting from 2.0 to 16.2 mJm-2, (ii) the surface roughness of the AOC
decreasing from an Ra value of 25.9 to 6.3 μm after laser melting and (iii) the relative surface oxygen
content of the AOC increasing by 36% after laser melting. HPDL melting was consequently
identified as affecting a decrease in the enamel contact angle from 1180 prior to laser melting to 330
after laser melting; thus allowing the vitreous enamel to wet the AOC surface. The effective melt
depth for such modifications was measured as being from 50 to 125 μm. The morphological,
microstructural and wetting characteristics of the AOC were determined using optical microscopy,
scanning electron microscopy, energy disperse X-ray analysis, X-ray diffraction techniques and
wetting experiments by the sessile drop technique. The work has shown that laser radiation can be
used to alter the wetting characteristics of the AOC only when surface melting occurs
An image reconstruction algorithm based on the semiparametric model for electrical capacitance tomography
AbstractElectrical capacitance tomography (ECT) is considered as a promising tomography technology, and exactly reconstructing the original objects is highly desirable in real applications. In this paper, a generalized image reconstruction model that simultaneously considers the inaccurate property in the measured capacitance data and the linearization approximation error is presented. A generalized objective function, which has been developed using a combinational M-estimation and an extended stabilizing item, is proposed. The objective function unifies six estimation methods into a concise formula, where different estimation methods can be easily obtained by selecting different parameters. The homotopy method that integrates the beneficial advantages of the alternant iteration scheme is employed to solve the proposed objective function. Numerical simulations are implemented to evaluate the numerical performances and effectiveness of the proposed algorithm, and the numerical results reveal that the proposed algorithm is efficient and overcomes the numerical instability in the process of ECT image reconstruction. For the reconstructed objects in this paper, a dramatic improvement in accuracy and spatial resolution can be achieved, which indicates that the proposed algorithm is a promising candidate for solving ECT inverse problems
An efficient compressive sensing based PS-DInSAR method for surface deformation estimation
Permanent scatterers differential interferometric synthetic aperture radar (PS-DInSAR) is a
technique for detecting surface micro-deformation, with an accuracy at the centimeter to millimeter
level. However, its performance is limited by the number of SAR images available (normally more than
20 are needed). Compressive Sensing (CS) has been proven to be an effective signal recovery method
with only a very limited number of measurements. Applying CS to PS-DInSAR, a novel
CS-PS-DInSAR method is proposed to estimate the deformation with fewer SAR images. By analyzing
the PS-DInSAR process in detail, first the sparsity representation of deformation velocity difference is
obtained; then, the mathematical model of CS-PS-DInSAR is derived and the restricted isometry
property (RIP) of the measurement matrix is discussed to validate the proposed CS-PS-DInSAR in
theory. The implementation of CS-PS-DInSAR is achieved by employing basis pursuit algorithms to
estimate the deformation velocity. With the proposed method, DInSAR deformation estimation can be
achieved by a much smaller number of SAR images, as demonstrated by simulation result
Attribution of climate change, vegetation restoration, and engineering measures to the reduction of suspended sediment in the Kejie catchment, southwest China
10.5194/hess-18-1979-2014Hydrology and Earth System Sciences1851979-199
- …