20,121 research outputs found
Evolution of a curved vortex filament into a vortex ring
The deformation of a hairpin-shaped vortex filament under self-induction and in the presence of shear is studied numerically using the Biot-Savart law. It is shown that the tip region of an elongated hairpin vortex evolves into a vortex ring and that the presence of mean shear impedes the process. Evolution of a finite-thickness vortex sheet under self-induction is also investigated using the Navier-Stokes equations. The layer evolves into a hairpin vortex which in turn produces a vortex ring of high Reynolds stress content. These results indicate a mechanism for the generation of ring vortices in turbulent shear flows, and a link between the experimental and numerical observation of hairpin vortices and the observation of ring vortices in the outer regions of turbulent boundary layers
Use of cohesive elements in fatigue analysis
Cohesive laws describe the resistance to incipient separation
of material surfaces. A cohesive finite element
is formulated on the basis of a particular cohesive
law. Cohesive elements are placed at the boundary
between adjacent standard volume finite elements
to model fatigue damage that leads to fracture at the
separation of the element boundaries per the cohesive
law. In this work, a cohesive model for fatigue
crack initiation is taken to be the irreversible loadingunloading
hysteresis that represents fatigue damage
occuring due to cyclic loads leading to the initiation of
small cracks. Various cohesive laws are reviewed and
one is selected that incorporates a hysteretic cyclic
loading that accounts for energetic dissipative mechanisms.
A mathematical representation is developed
based on an exponential effective load-separation cohesive
relationship. A three-dimensional cohesive element
is defined using this compliance relationship integrated
at four points on the mid-surface of the area
element. Implementation into finite element software
is discussed and particular attention is applied to numerical
convergence issues as the inflection point between
loading and 'unloading in the cohesive law is
encountered. A simple example of a displacementcontrolled
fatigue test is presented in a finite element
simulation. Comments are made on applications of
the method to prediction of fatigue life for engineering
structures such as pressure vessels and piping
Development of an algebraic turbulence model for analysis of propulsion flows
A simple turbulence model that will be applicable to propulsion flows having both wall bounded and unbounded regions was developed and installed within the PARC Navier-Stokes code by linking two existing algebraic turbulence models. The first is the Modified Mixing Length (MML) model which is optimized for wall bounded flows. The second is the Thomas model, the standard algebraic turbulence model in PARC which has been used to calculate both bounded and unbounded turbulent flows but was optimized for the latter. This paper discusses both models and the method employed to link them into one model (referred to as the MMLT model). The PARC code with the MMLT model was applied to two dimensional turbulent flows over a flat plate and over a backward facing step to validate and optimize the model and to compare its predictions to those obtained with the three turbulence models already available in PARC
Systems identification and application systems development for monitoring the physiological and health status of crewmen in space
The use of automated, analytical techniques to aid medical support teams is suggested. Recommendations are presented for characterizing crew health in terms of: (1) wholebody function including physiological, psychological and performance factors; (2) a combination of critical performance indexes which consist of multiple factors of measurable parameters; (3) specific responses to low noise level stress tests; and (4) probabilities of future performance based on present and periodic examination of past performance. A concept is proposed for a computerized real time biomedical monitoring and health care system that would have the capability to integrate monitored data, detect off-nominal conditions based on current knowledge of spaceflight responses, predict future health status, and assist in diagnosis and alternative therapies. Mathematical models could play an important role in this approach, especially when operating in a real time mode. Recommendations are presented to update the present health monitoring systems in terms of recent advances in computer technology and biomedical monitoring systems
Designing Effective Questions for Classroom Response System Teaching
Classroom response systems (CRSs) can be potent tools for teaching physics.
Their efficacy, however, depends strongly on the quality of the questions used.
Creating effective questions is difficult, and differs from creating exam and
homework problems. Every CRS question should have an explicit pedagogic purpose
consisting of a content goal, a process goal, and a metacognitive goal.
Questions can be engineered to fulfil their purpose through four complementary
mechanisms: directing students' attention, stimulating specific cognitive
processes, communicating information to instructor and students via
CRS-tabulated answer counts, and facilitating the articulation and
confrontation of ideas. We identify several tactics that help in the design of
potent questions, and present four "makeovers" showing how these tactics can be
used to convert traditional physics questions into more powerful CRS questions.Comment: 11 pages, including 6 figures and 2 tables. Submitted (and mostly
approved) to the American Journal of Physics. Based on invited talk BL05 at
the 2005 Winter Meeting of the American Association of Physics Teachers
(Albuquerque, NM
Quantum interference with molecules: The role of internal states
Recent experiments have shown that fullerene and fluorofullerene molecules
can produce interference patterns. These molecules have both rotational and
vibrational degrees of freedom. This leads one to ask whether these internal
motions can play a role in degrading the interference pattern. We study this by
means of a simple model. Our molecule consists of two masses a fixed distance
apart. It scatters from a potential with two or several peaks, thereby
mimicking two or several slit interference. We find that in some parameter
regimes the entanglement between the internal states and the translational
degrees of freedom produced by the potential can decrease the visibility of the
interference pattern. In particular, different internal states correspond to
different outgoing wave vectors, so that if several internal states are
excited, the total interference pattern will be the sum of a number of
patterns, each with a different periodicity. The overall pattern is
consequently smeared out. In the case of two different peaks, the scattering
from the different peaks will excite different internal states so that the path
the molecule takes become entangled with its internal state. This will also
lead to degradation of the interference pattern. How these mechanisms might
lead to the emergence of classical behavior is discussed.Comment: 12 pages, 4 eps figures, quality of figures reduced because of size
restriction
Analysis of Photoassociation Spectra for Giant Helium Dimers
We perform a theoretical analysis to interpret the spectra of purely
long-range helium dimers produced by photoassociation (PA) in an ultra-cold gas
of metastable helium atoms. The experimental spectrum obtained with the PA
laser tuned closed to the atomic line has been
reported in a previous Letter. Here, we first focus on the corrections to be
applied to the measured resonance frequencies in order to infer the molecular
binding energies. We then present a calculation of the vibrational spectra for
the purely long-range molecular states, using adiabatic potentials obtained
from perturbation theory. With retardation effects taken into account, the
agreement between experimental and theoretical determinations of the spectrum
for the purely long-range potential well is very good. The results
yield a determination of the lifetime of the atomic state
Darth Fader: Using wavelets to obtain accurate redshifts of spectra at very low signal-to-noise
We present the DARTH FADER algorithm, a new wavelet-based method for
estimating redshifts of galaxy spectra in spectral surveys that is particularly
adept in the very low SNR regime. We use a standard cross-correlation method to
estimate the redshifts of galaxies, using a template set built using a PCA
analysis on a set of simulated, noise-free spectra. Darth Fader employs wavelet
filtering to both estimate the continuum & to extract prominent line features
in each galaxy spectrum. A simple selection criterion based on the number of
features present in the spectrum is then used to clean the catalogue: galaxies
with fewer than six total features are removed as we are unlikely to obtain a
reliable redshift estimate. Applying our wavelet-based cleaning algorithm to a
simulated testing set, we successfully build a clean catalogue including
extremely low signal-to-noise data (SNR=2.0), for which we are able to obtain a
5.1% catastrophic failure rate in the redshift estimates (compared with 34.5%
prior to cleaning). We also show that for a catalogue with uniformly mixed SNRs
between 1.0 & 20.0, with realistic pixel-dependent noise, it is possible to
obtain redshifts with a catastrophic failure rate of 3.3% after cleaning (as
compared to 22.7% before cleaning). Whilst we do not test this algorithm
exhaustively on real data, we present a proof of concept of the applicability
of this method to real data, showing that the wavelet filtering techniques
perform well when applied to some typical spectra from the SDSS archive. The
Darth Fader algorithm provides a robust method for extracting spectral features
from very noisy spectra. The resulting clean catalogue gives an extremely low
rate of catastrophic failures, even when the spectra have a very low SNR. For
very large sky surveys, this technique may offer a significant boost in the
number of faint galaxies with accurately determined redshifts.Comment: 22 pages, 15 figures. Accepted for publication in Astronomy &
Astrophysic
Special Topic: Chesapeake Bay Management -- Welfare Implications of Restricted Triazine Herbicide Use in the Chesapeake Bay Region
The United States Environmental Protection Agency has responsibility under the Federal Insecticide, Fungicide, and Rodenticide Act (FIERA) to formulate pesticide policies on the basis of risk-benefit analyses. To measure the benefits of pesticide use, one must look at the losses in consumer and producer surpluses that would accompany the banning of a particular pesticide. A typical scenario is one in which the banned pesticide is replaced by another that is more costly and/or less effective. The resulting decrease in supply raises the price of the crop on which the banned pesticide is used, and may alter the prices of substitute and complementary crops as well. This article presents a simulation model of com and soybean production in the Chesapeake Bay drainage area to investigate the economic implications of a local ban on triazine herbicides. It reports estimates of lost producer and consumer surplus and the effect that the ban would have on the profitability of agricultural production in the region.Environmental Economics and Policy, Resource /Energy Economics and Policy,
Gaussian-Charge Polarizable Interaction Potential for Carbon Dioxide
A number of simple pair interaction potentials of the carbon dioxide molecule
are investigated and found to underestimate the magnitude of the second virial
coefficient in the temperature interval 220 K to 448 K by up to 20%. Also the
third virial coefficient is underestimated by these models. A rigid,
polarizable, three-site interaction potential reproduces the experimental
second and third virial coefficients to within a few percent. It is based on
the modified Buckingham exp-6 potential, an anisotropic Axilrod-Teller
correction and Gaussian charge densities on the atomic sites with an inducible
dipole at the center of mass. The electric quadrupole moment, polarizability
and bond distances are set to equal experiment. Density of the fluid at 200 and
800 bars pressure is reproduced to within some percent of observation over the
temperature range 250 K to 310 K. The dimer structure is in passable agreement
with electronically resolved quantum-mechanical calculations in the literature,
as are those of the monohydrated monomer and dimer complexes using the
polarizable GCPM water potential. Qualitative agreement with experiment is also
obtained, when quantum corrections are included, for the relative stability of
the trimer conformations, which is not the case for the pair potentials.Comment: Error in the long-range correction fixed and three-body dispersion
introduced. 32 pages (incl. title page), 7 figures, 9 tables, double-space
- …