328 research outputs found
BENCHMARKING OF TWO SYSTEMS FOR TRANSMISSION OF MOTION FOR A DOUBLE ACTION STIRLING ENGINE
In a four-piston Stirling engine, Siemens configuration, the displacement of the pistons is governed by the motion transmission element, which converts the reciprocating motion of pistons into rotary motion. This study aimed to evaluate the influence of the geometry of the transmission element in the mechanical efficiency of a Stirling engine. Analyses were performed using a mathematical computer simulation that uses the geometric and operating data of the engine to calculate the mechanical power and efficiency through a first order thermodynamic mathematical model, also known as the Schmidtmodel. First, an analysis was performed to evaluate the mechanical efficiency of the transmission element with a sinusoidal curve surface. Later, it was implemented in the transmission mechanism a segment based straight plans surface, and then the same analysis was performed with this new transmission element. The results showed that using the transmission element with segment based straight plans the engine showed a significant increase in efficiency. Moreover, one can observe an increase in the vibration of the system, making it necessary to develop an appropriate system for balancing
Isolation and characterization of a salt-tolerant bacterial community isolated from atriplex rhizosphere.
Identificação de méis adulterados utilizando FT-NIR e quimiometria.
O mel é um produto alimentício que tem sofrido constantemente processos de adulteração devido ao seu custo e sua disponibilidade limitada. Desta forma, o presente trabalho tem como objetivo analisar amostras de mel não adulteradas e adulteradas com glicose, melado de cana-de-açúcar e água, em diferentes proporções, 10%, 25%, 40% e 50% (m m-1). As amostras foram analisadas utilizando espectrometria na região do infravermelho próximo com transformada de Fourier (FT-NIR) e os resultados obtidos foram analisados utilizando a ferramenta quimiométrica de análise de componentes principais (PCA). A partir dos resultados obtidos, foi possível verificar a viabilidade da técnica NIR para verificação da adulteração de méis com água
Effects of different maturation systems on bovine oocyte quality, plasma membrane phospholipid composition and resistance to vitrification and warming.
Criptorquidectomia em coelhos: modelo experimental para treinamento laparoscópico
O artigo não apresenta resumo
Protein synthesis and degradation gene SNPs related to feed intake, feed efficiency, growth, and ultrasound carcass traits in Nellore cattle.
We looked for possible associations of SNPs in genes related to protein turnover, with growth, feed efficiency and carcass traits in feedlot Nellore cattle. Purebred Nellore bulls and steers (N = 290; 378 ± 42 kg body weight, 23 months ± 42 days old) were evaluated for daily feed intake, body weight gain (BWG), gross feed efficiency, feed conversion ratio, partial efficiency of growth, residual feed intake (RFI), ultrasound backfat, rump fat, and ribeye area
Deposition temperature influence on the wear behaviour of carbon-based coatings deposited on hardened steel
An evaluation regarding the influence of substrate material characteristics and deposition parameters on the tribological behaviour of carbon-based is presented. Chromium nitride interlayers and carbon-based thin films were deposited on hardened AISI 5115 case hardening steel, by magnetron sputtering. The physical vapour deposition (PVD) deposition was performed at three different temperatures: 180 °C, 200 °C and 250 °C. The chemical composition of the samples was assessed by Rutherford Backscattering Spectroscopy (RBS), the structure by X-ray Diffraction (XRD), and the surface morphology by Atomic Force Microscopy (AFM). The surface chemistry was analysed by X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. The coatings are homogeneous, amorphous, with a smooth surface. The mechanical behaviour has been assessed on a pin-on disk rotational tribometer (wear characteristics), on a micro scratch tester (adhesion to the substrate), by ball-cratering (film thickness); by nanoindentation (hardness and the modulus of elasticity). A strong correlation between the substrate characteristics, but more importantly, of the deposition temperature, on one hand, and the mechanical characteristics, on the other hand, has been observed. The fracture toughness is positively influenced by the presence of the ceramic interlayer (chromium nitride). The modulus of elasticity and friction coefficient (both in dry conditions and lubricated) are decreased for higher deposition temperatures, however the higher deposition temperature negatively affects the hardness of the steel substrate.We hereby acknowledge the structural funds project PRO-DD (POSCCE, O.2.2.1., ID 123, SMIS 2637, ctr. no 11/2009) for providing some of the infrastructure used in this work
Comportamento de variedades paulistas de algodoeiro em face das colheitas manual e mecânica
O curuquerê, Anomis impasta (Guenée) (Lepidoptera, Noctuidae) em algodoeiro
Anomis impasta (Guenée) é uma espécie que apresenta morfologia e comportamento muito similar ao curuquerê-do-algodoeiro, Alabama argillacea (Hübner). Durante duas safras de algodão, foi monitorada a alimentação de A. impasta em folhas e brácteas da cultura. Assim, este estudo foi conduzido para gerar informações biológicas sobre a espécie. As larvas foram criadas em folhas de algodão e botões florais (brácteas + botão floral), partes em que as lagartas foram comumente encontradas em campo. Larvas criadas com botão floral apresentaram maior período larval (18,5 ± 0,18 dias) e menor peso pupal (140,8 ± 2,26 mg) em comparação às larvas criadas apenas com folhas (14,0 ± 0,07 dias e 169,3 ± 2,06 mg). Assim, uma geração de A. impasta foi obtida alimentando-se as larvas com folhas de algodão. A média (variação) de duração para a fase de ovo, larva e pupa foi de 3,0 (3 a 4), 14,8 (14 a 18) e 9,7 (7 a 14) dias, respectivamente. A viabilidade para ovos, larva e pupa foi de 43,7; 98,3 e 94,7%, respectivamente. As fêmeas viveram em média 25,2 dias (15 a 37) e produziram 869 ovos (4 a 1866). O desenvolvimento e reprodução de A. impasta em algodoeiro, em especial quando as lagartas desenvolvem-se sobre folhas, fornecem indícios do seu potencial em atingir condição de praga na cultura. A semelhança com a espécie A. argillacea, como apresentado neste estudo, pode ser uma das razões de sua baixa constatação de A. impasta em campo. Portanto, acredita-se que as informações geradas com este estudo auxiliem pesquisadores e produtores na identificação dessas duas espécies desfolhadoras do algodoeiro.Anomis impasta (Guenée) is a species that shows remarkable morphological and behavioral similarities with the cotton leafworm Alabama argillacea (Hübner). During two growing cotton seasons, A. impasta was observed feeding on leaves and flower bracts of cotton and monitored. Furthermore, a study was conducted under laboratory conditions to generate biological information about this species with larvae feeding cotton squares and leaves. Larvae fed on cotton squares exhibited delayed development (18.5 ± 0.18 days) and lower pupal weight (140.8 ± 2.26 mg) compared to larvae fed on cotton leaves (14.0 ± 0.07 days and 169.3 ± 2.06 mg). Thus, one generation cycle of A. impasta was obtained by feeding the larvae with cotton leaves. The mean (minimum-maximum) values for the duration of eggs, larvae and pupae were: 3.0 (3-4), 14.8 (14-18), and 9.7 (7-14) days, respectively. The viability of the eggs, larvae, and pupae were 43.7, 98.3, and 94.7%, respectively. Females lived on average 25.2 days (ranging from 15 to 37 days) and produced 869 eggs (from 4 to 1,866 eggs). The successful development and reproduction of A. impasta on cotton, especially, on the cotton leaves, suggest the potential of this species to reach a pest status in cotton. The similarities with A. argillacea, as discussed in this study, can be one of the reasons for low reference to A. impasta in the field. Therefore, the information provided here will allow researchers and growers to distinguish these two cotton defoliators
Production of transgenic cattle by somatic cell nuclear transfer (SCNT) with the human granulocyte colony-stimulation factor (hG-CSF)
The hG-CSF (human Granulocyte Colony-Stimulating Factor) is a growth and
stimulation factor capable of inducing the proliferation of bone marrow cells,
several types of leukocytes, among other hematopoietic tissue cells. hG-CSF is
used in used to treat anomalies that reder a small number of circulating white
blood cells, which may compromise the immune defenses of the affected person.
For these reasons, the production of hG-CSF in a bioreactor system using the
mammary gland of genetic modified animals is a possibility of adding value to
the bovine genetic material and reducing the costs of hG-CSF production in
pharmaceutical industry. In this study, we aimed the production of transgenic
hG-CSF bovine through the lipofection of bovine primary fibroblasts with an
hG-CSF expression cassette and cloning these fibroblasts by the somatic cell
nuclear transfer (SCNT) technique. The bovine fibroblasts transfected with the
hG-CSF cassette presented a stable insertion of this construct into their genome
and were efficiently synchronized to G0/G1 cell cycle stage. The transgenic
fibroblasts were cloned by SCNT and produced 103 transferred embryos and 2
pregnancies, one of which reached 7 months of gestation
- …