68 research outputs found
Comment on âAbyssal upwelling and downwelling driven by near-boundary mixingâ
Author Posting. © American Meteorological Society, 2018. This article is posted here by permission of American Meteorological Society for personal use, not for redistribution. The definitive version was published in Journal of Physical Oceanography 48 (2018): 739-748, doi:10.1175/JPO-D-17-0089.1.McDougall and Ferrari have estimated the global deep upward diapycnal flow in the boundary layer overlying continental slopes that must balance both downward diapycnal flow in the deep interior and the formation of bottom water around Antarctica. The decrease of perimeter of isopycnal surfaces with depth and the observed decay with height above bottom of turbulent dissipation in the deep ocean play a key role in their estimate. They argue that because the perimeter of seamounts increases with depth, the net effect of mixing around seamounts is to produce net downward diapycnal flow. While this is true along much of a seamount, it is shown here that diapycnal flow of the densest water around the seamount is upward, with buoyancy being transferred from water just above. The same is true for midocean ridges, whose perimeter is constant with depth. It is argued that mixing around seamounts and especially midocean ridges contributes positively to the global deep overturning circulation, reducing the amount of turbulence demanded over the continental slopes to balance the buoyancy budget for the bottom and deep water.This work was
supported by National Science Foundation Grant OCE-
1232962.2018-09-2
Water samplers for open ocean tracer release experiments
Conventional "spot" sampling of patchy distributions of oceanic constituents can lead to sampling errors. Interpretation of results
based on data of disparate temporal or spatial resolution can be difficult or impossible. Ths report discusses the design and
performance of two water sampling devices which attempt to minimize these problems. The devices were created for open ocean
tracer release experiments, but can be used for other experiments where inhomogeneity is anticipated. The first sampler is a
mechancally-operated, variable-rate integrating water sampler which acquires a time-averaged sample. The sampler incorporates
featues of both the spring-driven and the hydraulically-driven samplers described by Ledwell et al., 1991. The second sampler is a
multichamber sampling system incorporating a battery powered pump and valve system made by McLane Research, Inc., of
Falmouth, Massachusett. The system consists of a micro-gear pump, a 50-port valve with programmable controller, and
carousels contaning fifty glass sampling syringes. It can be programmed to sample on a variety of schedules allowing the user
flexibilty in the field to adapt to changing requirements. A general description, operational instructions, and performance analysis
are provided for each sampler system.Funding was provided by National Science Foundation under
grant numbers OCE-9020492 and OCE-9415598
Mass transfer from smooth alabaster surfaces in turbulent flows
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94735/1/grl3757.pd
Use of SF5CF3 for ocean tracer release experiments
Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geophysical Research Letters 35 (2008): L04602, doi:10.1029/2007GL032799.SF6 tracer release experiments (TREs) have provided fundamental insights in many areas of Oceanography. Recently, SF6 has emerged as a powerful transient tracer, generating a need for an alternative tracer for large-scale ocean TREs. SF5CF3 has the potential to replace SF6 in TREs, due to similarities in their properties and behavior, as well as techniques for injection, sampling, and analysis. The suitability of SF5CF3 for TREs was examined in Santa Monica Basin, off the coast of Southern California. In January 2005, a mixture of ca. 10 mol of both SF6 and SF5CF3 was injected on an isopycnal surface near 800 m depth. Over the next 23 months, concentrations of the two tracers mirrored each other very closely, indicating that SF5CF3 is a viable replacement for SF6 in ocean TREs. The mixing parameters inferred from the experiment confirmed the results from an earlier SF6 TRE in the Santa Monica Basin.Funding was provided by the US National Science
Foundation through OCE0425404 to W. Smethie and D. Ho and
OCE0425197 to J. Ledwell
Lateral dispersion over the continental shelf: Analysis of dye-release experiments.
Abstract. Lateral dispersion over the continental shelf was examined using dye studies performed as a part of the Coastal Mixing and Optics experiment. Four experiments performed at intermediate depths, each lasting 2.5-5 days, were examined. In some cases the dye patches remained fairly homogeneous both vertically and horizontally throughout an experiment. In other cases, significant patchiness was observed on scales ranging from 2 to 10 m vertically and a few hundred meters to a few kilometers horizontally. The observations showed that the dye distributions were significantly influenced by shearing and straining on scales of 5-10 m in the vertical and 1-10 km in the horizontal. Superimposed on these larger
Mixing in a coastal environment : 1. A view from dye dispersion
Author Posting. © American Geophysical Union, 2004. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 109 (2004): C10013, doi:10.1029/2003JC002194.Dye release experiments were performed together with microstructure profiling to compare the two methods of estimating diapycnal diffusivity during summer and fall stratification on the continental shelf south of New England. The experiments were done in 1996 and 1997 as part of the Coastal Mixing and Optics Experiment. During the 100 hours or so of the experiments the area of the dye patches grew from less than 1 km2 to more than 50 km2 [ Sundermeyer and Ledwell, 2001 ]. Diapycnal diffusivities inferred from dye dispersion range from 10â6 to 10â5 m2/s at buoyancy frequencies from 9 to 28 cycles/hour. Diffusivities estimated from the dye and those estimated from dissipation rates in the companion paper by Oakey and Greenan [2004] agree closely in most cases. Estimates of diffusivities from towed conductivity microstructure measurements made during the cruises by Duda and Rehmann [2002] and Rehmann and Duda [2000] are fairly consistent with the dye diffusivities. The dye diffusivities would be predicted well by an empirical formula involving shear and stratification statistics developed by MacKinnon and Gregg [2003] from profiling microstructure measurements obtained at the same site in August 1996. All of the measurements support the general conclusion that the diffusivity, averaged over several days, is seldom greater than 10â5 m2/s in the stratified waters at the site, and usually not much greater than 10â6 m2/s. Severe storms, such as a hurricane that passed over the CMO site in 1996, can dramatically increase the mixing at the site, however.This work was part of the ONR Coastal
Mixing and Optics Experiment, and was funded by grants N00014-95-1-
0633, N00014-95-1-1063, N00014-95-1-1064, and N00014-01-1-0211.
Completion of this paper was supported by the Edward W. and Ellyn B.
Scripps Chair awarded to J. Ledwell. H. Seimâs participation was supported
by ONR grant N00014-96-1-0616
Dispersion of a tracer in the deep Gulf of Mexico
Author Posting. © American Geophysical Union, 2016. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Oceans 121 (2016): 1110â1132, doi:10.1002/2015JC011405.A 25 km streak of CF3SF5 was released on an isopycnal surface approximately 1100 m deep, and 150 m above the bottom, along the continental slope of the northern Gulf of Mexico, to study stirring and mixing of a passive tracer. The location and depth of the release were near those of the deep hydrocarbon plume resulting from the 2010 Deepwater Horizon oil well rupture. The tracer was sampled between 5 and 12 days after release, and again 4 and 12 months after release. The tracer moved along the slope at first but gradually moved into the interior of the Gulf. Diapycnal spreading of the patch during the first 4 months was much faster than it was between 4 and 12 months, indicating that mixing was greatly enhanced over the slope. The rate of lateral homogenization of the tracer was much greater than observed in similar experiments in the open ocean, again possibly enhanced near the slope. Maximum concentrations found in the surveys had fallen by factors of 104, 107, and 108, at 1 week, 4 months, and 12 months, respectively, compared with those estimated for the initial tracer streak. A regional ocean model was used to simulate the tracer field and help interpret its dispersion and temporal evolution. Model-data comparisons show that the model simulation was able to replicate statistics of the observed tracer distribution that would be important in assessing the impact of oil releases in the middepth Gulf.This research was made possible by a grant from The Gulf of Mexico Research Initiative.2016-08-0
Brazil Basin Tracer Release Experiment
The purpose of the Brazil Basin Tracer Release Experiment is to measure diapycnal (across isopycnal) mixing and epipycnal (along-isopycnal) mixing and stirring in the deep ocean. This cruise is the fourth in the overall experiment. In the first cruise in early 1996, 110 kg of sulfur hexafluoride (SF6) were released on an isopycnal surface near 4000 meters depth in the eastern
part of the basin on the flanks of the Mid-Atlantic Ridge (MAR). The location of the release was near 21.7 S, 18.4 W. The release site was over a zonal valley that leads to the MAR and is about 5000 m deep. The isopycnal surface of the release was defined as the surface on which the potential density anomaly, referenced to 4000 dbar pressure, was 45.9408 kg/m3. The release streaks and results of initial sampling in 1996 are described in Polzin et al. [1997]
The prediction, verification, and significance of flank jets at mid-ocean ridges
Author Posting. © The Oceanography Society, 2012. This article is posted here by permission of The Oceanography Society for personal use, not for redistribution. The definitive version was published in Oceanography 25, no. 1 (2012): 277â283, doi:10.5670/oceanog.2012.26.One aspect of ocean flow over mid-ocean ridges that has escaped much attention is the capacity of a ridge to convert oscillatory flows into unidirectional flows. Those unidirectional flows take the form of relatively narrow jets hugging the ridge's flanks. In the Northern Hemisphere, the jets move heat and dissolved and particulate matter poleward on the west and equatorward on the east of north-south trending ridges. Recent measurements and a model of flow at the East Pacific Rise at 9â10°N show that these ridge-parallel flows can extend 10â15 km horizontally away from the ridge axis, reach from the seafloor to several hundreds of meters above ridge crest depth, and have maximum speeds in their cores up to 10 cm sâ1. Because of their along-ridge orientation and speed, the jets can significantly affect the transport of hydrothermal vent-associated larvae between vent oases along the ridge crest and, possibly, contribute to the mesoscale stirring of the abyssal ocean. Because jet-formation mechanisms involve oscillatory currents, ocean stratification, and topography, the jets are examples of "stratified topographic flow rectification." Ridge jets have parallels in rectified flows at seamounts and submarine banks.JWL is supported by
the National Oceanic and Atmospheric
Administration (NOAA) Pacific Marine
Environmental Laboratory and by
NOAA Vents Program. The work of
other authors has been supported by
National Science Foundation through
grants OCE-0424953 and OCE-0425361,
LADDER (LArval Dispersion along the
Deep East pacific Rise)
Estimating a sub-mesoscale diffusivity using a roughness measure applied to a tracer release experiment in the Southern Ocean
We test the use of a measure to diagnose a sub-mesoscale isopycnal diffusivity by determining the best match between observations of a tracer and simulations with varying small-scale diffusivities. Specifically, the robustness of a âroughnessâ measure to discriminate between tracer fields experiencing different sub-mesoscale isopycnal diffusivities and advected by scaled altimetric velocity fields is investigated. We use the measure to compare numerical simulations of the tracer released at a depth of about 1.5 km in the Pacific sector of the Southern Ocean during the Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean (DIMES) field campaign with observations of the tracer taken on DIMES cruises. We find that simulations with an isopycnal diffusivity of ~20 m2sâ1 best match observations in the Pacific sector of the ACC, rising to ~20-50 m2sâ1 through Drake Passage, representing sub-mesoscale processes and any mesoscale processes unresolved by the advecting altimetry fields. The roughness measure is demonstrated to be a statistically robust way to estimate a small-scale diffusivity when measurements are relatively sparse in space and time, although it does not work if there are too few measurements overall. The planning of tracer measurements during a cruise in order to maximise the robustness of the roughness measure is also considered. It is found that the robustness is increased if the spatial resolution of tracer measurements is increased with the time since tracer release
- âŠ