2,147 research outputs found
Stellar (n,γ) cross sections of ²³Na
The cross section of the ²³Na(n,γ)²⁴Na reaction has been measured via the activation method at the Karlsruhe 3.7 MV Van de Graaff accelerator. NaCl samples were exposed to quasistellar neutron spectra at kT = 5.1 and 25 keV produced via the ¹⁸O(p,n)¹⁸F and ⁷Li(p,n)⁷Be reactions, respectively. The derived capture cross sections (σ)kT=5keV = 9.1 ± 0.3mb and (σ)kT=25keV = 2.03 ± 0.05 mb are significantly lower than reported in literature. These results were used to substantially revise the radiative width of the first ²³Na resonance and to establish an improved set of Maxwellian average cross sections. The implications of the lower capture cross section for current models of s-process nucleosynthesis are discussed
Circular Optical Nanoantennas: An Analytical Theory
An entirely analytical theory is provided for describing the resonance
properties of optical nanoantennas made of a stack of homogeneous discs, i.e.
circular patch nanoantennas. It consists in analytically calculating the phase
accumulation of surface plasmon polaritons across the resonator and an
additional contribution from the complex reflection coefficient at the antenna
termination. This makes the theory self-contained with no need for fitting
parameters. The very antenna resonances are then explained by a simple
Fabry-Perot resonator model. Predictions are compared to rigorous simulations
and show excellent agreement. Using this analytical model, circular antennas
can be tuned by varying the composition of the stack
Stellar neutron capture cross sections of ²⁰ ²¹ ²²Ne
The stellar (n,γ) cross sections of the Ne isotopes are important for a number of astrophysical quests, i.e., for the interpretation of abundance patterns in presolar material or with respect to the s-process neutron balance in red giant stars. This paper presents resonance studies of experimental data in the keV range, which had not been fully analyzed before. The analyses were carried out with the R-matrix code sammy. With these results for the resonant part and by adding the components due to direct radiative capture, improved Maxwellian-averaged cross sections (MACS) could be determined. At kT=30keV thermal energy we obtain MACS values of 240±29,1263±160, and 53.2±2.7 μbarn for ²⁰Ne,²¹Ne, and ²²Ne, respectively. In earlier work the stellar rates of ²⁰Ne and ²¹Ne had been grossly overestimated. ²²Ne and ²⁰Ne are significant neutron poisons for the s process in stars because their very small MACS values are compensated by their large abundances
Itokawa's Opposition Surge seen by Hayabusa/AMICA
Using images acquired by the Hayabusa/AMICA instrument, along with Lederer et al.'s (2008) ground-based observations, we re-examine Itokawa's disk-integrated phase curve. The AMICA images provide critical opposition measurements (between 0.7deg - 9.3deg phase at 540 nm). Using Hapke's model (2012), we fit the updated phase curves at 5 different wavelengths. Preliminary modeling results show a range of porosity values commensurate with those in the literature (Ostro et al. 2004, Gundlach and Blum, 2012, Kiuchi and Nakamura 2014) based on an impact-generated grain size distribution function and grain size range evaluations from the AMICA data (Yano et al. 2006). This wide range on a global porosity is indicative of a highly variable porosity across the surface. The derived transport mean free path and the generally forward scattering nature of the global regolith are indicative of scattering centers (such as cracks, bubbles, and inclusions) that are small compared to the observational wavelengths. The derived regolith properties are compared with the imaging and sample analysis results, providing a test of the predictive capabilities of global disk-integrated measurements. This work suggests that the sub-pixel grain information could be extracted from the photometry, especially around opposition
Deformation of anisotropic Fermi surfaces due to electron-electron interactions
We analyze the deformations of the Fermi surface induced by electron-electron
interactions in anisotropic two dimensional systems. We use perturbation theory
to treat, on the same footing, the regular and singular regions of the Fermi
surface. It is shown that, even for weak local coupling, the self-energy
presents a nontrivial behavior showing momentum dependence and interplay with
the Fermi surface shape. Our scheme gives simple analytical expressions based
on local features of the Fermi surface.Comment: 7 pages, 3 figure
A simple and versatile analytical approach for planar metamaterials
We present an analytical model which permits the calculation of effective
material parameters for planar metamaterials consisting of arbitrary unit cells
(metaatoms) formed by a set of straight wire sections of potentially different
shape. The model takes advantage of resonant electric dipole oscillations in
the wires and their mutual coupling. The pertinent form of the metaatom
determines the actual coupling features. This procedure represents a kind of
building block model for quite different metaatoms. Based on the parameters
describing the individual dipole oscillations and their mutual coupling the
entire effective metamaterial tensor can be determined. By knowing these
parameters for a certain metaatom it can be systematically modified to create
the desired features. Performing such modifications effective material
properties as well as the far field intensities remain predictable. As an
example the model is applied to reveal the occurrence of optical activity if
the split ring resonator metaatom is modified to L- or S-shaped metaatoms.Comment: 5 figures, 1 tabl
Preliminary Characterization of IDCSP Spacecrafts Through a Multi-Analytical Approach
Defining the risks present to both crewed and robotic spacecrafts is part of NASA s mission, and is critical to keep these resources out of harm s way. Characterizing orbital debris is an essential part of this mission. We present a proof-of-concept study that employs multiple techniques to demonstrate the efficacy of each approach. The targets of this study are IDCSPs (Initial Defense Communications Satellite Program). 35 of these satellites were launched by the US in the mid-1960s and were the first US military communications satellites in the GEO regime. They were emplaced in slightly sub-synchronous orbits. These targets were chosen for this proof-of-concept study for the simplicity of their observable exterior surfaces. The satellites are 26-sided polygons (86cm in diameter), initially spin-stabilized, and covered on all sides in solar panels. Data presented here include: (a) visible broadband photometry (Johnson/Kron-Cousins BVRI) taken with the 0.9m SMARTs telescope (Small and Medium Aperture Telescopes) at the Cerro Tololo Inter-American Observatory (CTIO) in Chile in April, 2012, (b) laboratory broadband photometry (Johnson/ Bessell BVRI) of solar cells, obtained using the Optical Measurements Center (OMC) at NASA/JSC [1], (c) visible-band spectra taken using the Magellan 6.5m Baade Telescope at Las Campanas Observatory in Chile in May, 2012 [2], and (d) visible-band laboratory spectra of solar cells using an ASD Field Spectrometer. Color-color plots using broadband photometry (e.g. B-R vs. B-V) demonstrate that different material types fall into distinct areas on the plots [1]. Spectra of the same material types as those plotted in the color-color plots each display their own signature as well. Here, we compare lab data with telescopic data, and photometric results with spectroscopic results. The spectral response of solar cells in the visible wavelength regime varies from relatively flat to somewhat older solar cells whose reflectivity can be gently or sharply peaked in the blue. With a target like IDCSPs, the material type is known a priori, aiding in understanding how material type affects one s observations
- …