Simulations of coronagraphy with a dynamic hologram for the direct detection of exo-planets

In a previous paper, we discussed an original solution to improve the performances of coronagraphs by adding, in the optical scheme, an adaptive hologram removing most of the residual speckle starlight. In our simulations, the detection limit in the flux ratio between a host star and a very near planet (5 lambda/D) improves over a factor 1000 (resp. 10000) when equipped with a hologram for cases of wavefront bumpiness imperfections of lambda/20 (resp. lambda/100). We derive, in this paper, the transmission accuracy required on the hologram pixels to achieve such goals. We show that preliminary tests could be performed on the basis of existing technologies.Comment: 5 pages, 6 figure

Extreme coronagraphy with an adaptive hologram

We present a solution to improve the performances of coronagraphs in general for the detection of exo-planets. We simulate several kinds of coronagraphic systems using an IDL software, with the aim of evaluating the gain obtained using an adaptive hologram. The detection limit in flux ratio between a star and a planet observed with an apodized Lyot coronagraph characterized by wavefront bumpiness imperfections of lambda/20 (resp. lambda /100) turns out to be increased by a factor 1`000 (resp. 1`000`000) when equipped with an hologram. This technique could provide a direct imaging of an exo-earth at a distance of 11 parsec with a space telescope with a mirror quality analog to the HST, and with a diameter analog to the JWST

A Component-based Framework for Space Domain Software Applications

International audienceThis paper presents research carried on by Thales on component based software engineering for the space domain. We outline the space domain context and give the general architecture of MyCCM, our component framework. We explain how we implemented a space-specific component framework with MyCCM and what results we got from experiments. Applying component design to on-board space applications induces a very light overhead while allowing automatic code generation, as well as code reuse and application redeployment. It thus helps cut development costs and improve the reliability of software development

Les graffeurs de Montréal : penser la mobilité dans la construction du social

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal

Physiological traits of Penicillium glabrum strain LCP 08.5568, a filamentous fungus isolated from bottled aromatised mineral water

International audiencePenicillium glabrum is an ubiquitous fungus distributed world wide. This fungus is a frequent contaminant in the food manufacturing industry. Environmental factors such as temperature, water activity and pH have a great influence on fungal development. In this study, a strain of P. glabrum referenced to as LCP 08.5568, has been isolated from a bottle of aromatised mineral water. The effects of temperature, aw and pH on radial growth rate were assessed on Czapeck Yeast Agar (CYA) medium. Models derived from the cardinal model with inflection (Rosso et al., 1993 An unexpected correlation between cardinal temperatures of microbial growth highlighted by a new model. J Theor. Bio. 162, 447-463) were used to fit the experimental data and determine for each factor, the cardinal parameters (minimum, optimum and maximum). Precise characterisation of the growth conditions for such a fungal contaminant, has an evident interest to understand and to prevent spoilage of food products

Tests with a Carlina-type diluted telescope; Primary coherencing

Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between two mountains), carries a gondola containing the focal optics. Since 2003, we have been building a technical demonstrator of this diluted telescope. First fringes were obtained in May 2004 with two closely-spaced primary segments and a CCD on the focal gondola. We have been testing the whole optical train with three primary mirrors. The main aim of this article is to describe the metrology that we have conceived, and tested under the helium balloon to align the primary mirrors separate by 5-10 m on the ground with an accuracy of a few microns. The servo loop stabilizes the mirror of metrology under the helium balloon with an accuracy better than 5 mm while it moves horizontally by 30 cm in open loop by 10-20 km/h of wind. We have obtained the white fringes of metrology; i.e., the three mirrors are aligned (cospherized) with an accuracy of {\approx} 1 micron. We show data proving the stability of fringes over 15 minutes, therefore providing evidence that the mechanical parts are stabilized within a few microns. This is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or under a balloon. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named diluted telescopes.Comment: 18 pages, 17 figures, A&A, accepte

The Optimal Gravitational Lens Telescope

Given an observed gravitational lens mirage produced by a foreground deflector (cf. galaxy, quasar, cluster,...), it is possible via numerical lens inversion to retrieve the real source image, taking full advantage of the magnifying power of the cosmic lens. This has been achieved in the past for several remarkable gravitational lens systems. Instead, we propose here to invert an observed multiply imaged source directly at the telescope using an ad-hoc optical instrument which is described in the present paper. Compared to the previous method, this should allow one to detect fainter source features as well as to use such an optimal gravitational lens telescope to explore even fainter objects located behind and near the lens. Laboratory and numerical experiments illustrate this new approach

Luciola Hypertelescope Space Observatory

Luciola is a large (one kilometer) "multi-aperture densified-pupil imaging interferometer", or "hypertelescope" employing many small apertures, rather than a few large ones, for obtaining direct snapshot images with a high information content. A diluted collector mirror, deployed in space as a flotilla of small mirrors, focuses a sky image which is exploited by several beam-combiner spaceships. Each contains a pupil densifier micro-lens array to avoid the diffractive spread and image attenuation caused by the small sub-apertures. The elucidation of hypertelescope imaging properties during the last decade has shown that many small apertures tend to be far more efficient, regarding the science yield, than a few large ones providing a comparable collecting area. For similar underlying physical reasons, radio-astronomy has also evolved in the direction of many-antenna systems such as the proposed Low Frequency Array having hundreds of thousands of individual receivers . With its high limiting magnitude, reaching the mv=30 limit of HST when 100 collectors of 25cm will match its collecting area, high-resolution direct imaging in multiple channels, broad spectral coverage from the 1200 Angstrom ultra-violet to the 20 micron infra-red, apodization, coronagraphic and spectroscopic capabilities, the proposed hypertelescope observatory addresses very broad and innovative science covering different areas of ESA s Cosmic Vision program. In the initial phase, a focal spacecraft covering the UV to near IR spectral range of EMCCD photon-counting cameras ( currently 200 to 1000nm), will image details on the surface of many stars, as well as their environment, including multiple stars and clusters. Spectra will be obtained for each resel. It will also image neutron star, black-hole and micro-quasar candidates, as well as active galactic nuclei, quasars, gravitational lenses, and other Cosmic Vision targets observable with the initial modest crowding limit. With subsequent upgrade missions, the spectral coverage can be extended from 120nm to 20 microns, using four detectors carried by two to four focal spacecraft. The number of collector mirrors in the flotilla can also be increased from 12 to 100 and possibly 1,000. The imaging and spectroscopy of habitable exoplanets in the mid infra-red then becomes feasible once the collecting area reaches 6m2 , using a specialized mid infra-red focal spacecraft. Calculations ( Boccaletti et al., 2000) have shown that hypertelescope coronagraphy has unequalled sensitivity for detecting, at mid infra-red wavelengths, faint exoplanets within the exo-zodiacal glare. Later upgrades will enable the more difficult imaging and spectroscopy of these faint objects at visible wavelengths, using refined techniques of adaptive coronagraphy (Labeyrie. & Le Coroller, 2004). Together, the infra-red and visible spectral data carry rich information on the possible presence of life. The close environment of the central black-hole in the Milky Way will be imageable with unprecedented detail in the near infra-red . Cosmological imaging of remote galaxies at the limit of the known universe is also expected, from the ultra-violet to the near infra-red, following the first upgrade, and with greatly increasing sensitivity through successive upgrades. These areas will indeed greatly benefit from the upgrades, in terms of dynamic range, limiting complexity of the objects to be imaged, size of the elementary Direct Imaging Field , and limiting magnitude, approaching that of an 8-meter space telescope when 1000 apertures of 25cm are installed. Similar gains will occur for addressing fundamental problems in physics and cosmology, particularly when observing neutron stars and black holes, single or binary, including the giant black holes, with accretion disks and jets, in active galactic nuclei beyond the Milky Way. Gravitational lensing and micro-lensing patterns, including time-variable patterns and perhaps millisecond lensing flasheshich may be beamed by diffraction from sub-stellar masses at sub-parsec distances (Labeyrie, 1994) , will also be observable initially in the favourable cases, and upgrades will greatly improve the number of observable objects. The observability of gravitational waves emitted by binary lensing masses, in the form of modulated lensing patterns, is a debated issue ( Ragazzoni et al., 2003) but will also become addressable observationally. The technology readiness of Luciola approaches levels where low-orbit testing and stepwise implementation will become feasible in the 2015-2025 time frame. For the following decades beyond 2020, once accurate formation flying techniques will be mastered, much larger hypertelescopes such as the proposed 100km Exo-Earth Imager and the 100,000 km Neutron Star Imager should also become feasible. Luciola is therefore also seen as a precursor toward such very powerful instruments

Measuring differential rotation of the K-giant ζ\zeta\,And

We investigate the temporal spot evolution of the K-giant component in the RS CVn-type binary system $\zeta$\,Andromedae to establish its surface differential rotation. Doppler imaging is used to study three slightly overlapping spectroscopic datasets, obtained independently at three different observing sites. Each dataset covers one full stellar rotation with good phase coverage, and in total, results in a continuous coverage of almost three stellar rotations ($P_{\rm rot}=$17.8\,d). Therefore, these data are well suited for reconstructing surface temperature maps and studying temporal evolution in spot configurations. Surface differential rotation is measured by the means of cross-correlation of all the possible image pairs. The individual Doppler reconstructions well agree in the revealed spot pattern, recovering numerous low latitude spots with temperature contrasts of up to $\approx$1000\,K with respect to the unspotted photosphere, and also an asymmetric polar cap which is diminishing with time. Our detailed cross-correlation study consistently indicate solar-type differential rotation with an average surface shear $\alpha\approx0.055$, in agreement with former results.Comment: accepted for publication in A&A, 4 pages, 3 figure