A Survey for Biting Flies in three Local Government Areas of Taraba State, Nigeria

This study was carried out to determine the prevalence of biting flies from Gashaka, Ibi and Karim Lamido Local Government Areas (LGA) of Taraba State between July and August, 2010 using biconical traps, and identify them using morphological characteristics. Of the 908 biting flies collected from the traps 37.9% (344/908) were Tabanus, 25.9% (235/908) were Haematopota, 24.5% (223/908) were Chrysops, and 11.7% (106/908) were Glossina. Based on the LGAs sampled, the distribution of the flies in Gashaka, Ibi, and Karim Lamido (K/Lamido) were 44.6% (419/908), 21.9% (199/908), and 33.5% (290/908) respectively (p<0.05). An infection rate of 1.89% (2/106) was observed among the tsetse flies trapped. Two species of tsetse flies were identified as Glossina palpalis representing 67.9% (72/106) and Glossina tachinoides 32.1% (34/106). In conclusion, Tabanids had the highest distribution while Glossina had the lowest distribution across the three (3) LGAs of the State.Keywords: Biconical traps, Biting Flies, Survey, Taraba State

Synthesis of zeolite-A using kaolin samples from Darazo, Bauchi state and Ajebo, Ogun state in Nigeria

Kaolin samples from Ajebo and Darazo in Nigeria were characterized and used to produce zeolite - A crystals. The thermal analysis indicates that both samples under gode-hydroxylation from 450oC to about 700oC and are converted to metakaolin with a weight lo ss of about 11.39 and 10.43% for the Ajebo and Darazo samples respectively. Characteristic OH, Al-OH, Si-OH and Si-O-Albands were confirmed in both samples with Infra-red spectroscopy studies. The X - ray diffraction patterns clearly show the presence of the characteristic peaks (12.35 and 24.88o ) of kaolinite with little quartz impurities. X - ray diffraction measurements (2Ɵ peaks at 7 – 18o and 21 – 35o ) and scanning electron micro graphs clearly show that zeolite - A crystals are produced. The microstructures of kaolin, metakaolin and zeolite - A crystals reveal the presence of platy crystals, amorphous spherical aggregates and cubic - shaped crystals with some amorphous gel respectively . The results show that both Ajebo and Darazo kaolin are suitable for zeolite - A synthesis. Keywords: Kaolin, Metakaolin, Thermal analysis, X - ray Diffraction, Zeolite -

STRUCTURAL CHARACTERISTICS OF BATCH PROCESSED AGRO-WASTE FIBRES

The characterisation of agro-wastes fibres from Nigeria using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) has been done. Fibres extracted from groundnut shell, coconut husk, rice husk, palm fruit bunch and palm fruit stalk are processed using two novel cellulose fibre production methods developed by the authors. Cellulose apparent crystallinity calculated using the deconvolution of the diffractometer trace shows that the amorphous portion of cellulose was permeable to hydrolysis yielding high crystallinity after treatment. All diffratograms show typical cellulose structure with well-defined 110, 200 and 040 peaks. Palm fruit fibres had the highest 200 crystalline cellulose peaks compared to others and it is an indication of rich cellulose content. Surface examination of the resulting fibres using SEM indicates the presence of regular cellulose network structure with some agglomerated laminated layer of thin leaves of cellulose microfibrils. The surfaces were relatively smooth indicating the removal of hemicellulose, lignin and pectin

MODIFICATION OF NIGERIAN BENTONITE FOR UTILIZATION IN OIL WELL DRILLING OPERATIONS

More than 80 bentonite clay deposit sites had been identified in Nigeria. Yet, almost all clay and additives used for drilling oil well are imported. The reason is partly that in their natural states, they do not swell while polymers in their raw forms remain unstable at high temperatures. This study aimed at evaluating the potentials of chemically modified Nigerian bentonite for application in the oil and gas industry. The Gombe bentonite from Gombe State was beneficiated using NAHCO3 and slurries were made by dispersion in distilled water. In the presence of other local additives, evaluation of the slurries was carried out on the basis of filtration loss and rheology at different temperatures (30, 60 and 85 oC) using a Central Composite Design (CCD). The clay sample was characterized for mineral and elemental compositions using X-ray diffractometer (XRD) and X-ray fractometer (XRF) while proximate analysis was carried out on the additives. At the optimum condition, the result shows a significant improvement in mud rheology and fluid loss at various temperatures which are in close agreement with the API recommended standard

Relationship Between Gestation Length and Birth Weight in Nigerian Sheep and Their Crosses

Effect of genotype and birth weight on gestation length was evaluated using Nigerian breeds of sheep and their crosses. The study was carried out at the Sheep Project Unit of Small Ruminant Research Programme (SRRP) of National Animal Production Research Institute (NAPRI), Ahmadu Bello University, Shika-Zaria. The sheep breeds used were Balami, Uda and Yankasa. Heat (estrus) detection was carried out twice daily; in the morning (07:00-08:00 hours); and in the evening (16:00-17:00 hours) using apron fitted rams to pick does on heat. A total of 56 lambs were used for this study. The data obtained were subjected to analysis of variance using General Linear Model and Correlation Procedure of SAS. All the genotypes had similar gestation length with values between 150.3±0.61 days and 153.3±0.60 days, except for Balami pure breed (BAL X BAL) lambs that recorded a shorter gestation length (137.1±0.81 days). There was a wide variation in the birth weight of lambs with the crosses between Balami rams and Yankasa ewes recording a distinct birth weight of 3.5±0.08 kg while the crosses obtained using Yankasa rams on Uda and Balami ewes gave the lowest birth weights (1.7±0.19 and 1.4±0.18, respectively). Sex and litter type have no significant effect (P>0.05) on gestation length. Birth weight was however affected by sex of lambs and their litter type. Litter type was negatively correlated with birth weight (-0.372). Gestation length had a low and non-significant relationship with birth weight; litter type and lamb genotype. Lamb genotype does not have a significant relationship with litter type. Genetic improvement of Nigeria sheep breed is possible if the resources of within and between breed is exploited. Selection for a reduction in gestation length may indirectly increase prolificacy. (Animal Production 12(3): 135-138 (2010

Capital Flight and the Economic Growth: Evidence From Nigeria

This research examined the impact of capital flight and its determinants on the Nigerian economy using the Autoregressive Distributed Lag (ARDL) model to analyze data source from the period of 1981 to 2015. The variables included current account balance, capital flight, foreign direct investments, foreign reserve, inflation rate, external debt, and the real gross domestic product. It was to examine the existence of a long run relationship among the variables studied. The result indicates that capital flight has a negative impact on the economic growth of Nigeria. Therefore, there is a need for government to implement policies that will promote domestic investment and discourage capital flight from Nigeria

Price Transmission, Volatility and Discovery of Gram in Some Selected Markets in Rajathan State, India

Market integration in many agricultural commodities had been extensively studied for the insight it provides into the functioning of such markets, thus giving valuable information about the dynamics of market adjustment, and whether there exist market imperfection, which may justify government intervention. This study empirically investigated price transmission, volatility and discovery of gram across four wholesale gram markets, viz. Jaipur, Kishangarh, Chomu and Malpura in Rajasthan state of India using Johansen's multivariate cointegration approach, VECM, Granger causality tests, GARCH, EGARCH and ARIMA. Monthly wholesale gram price data spanning from January 2011 to December 2015 sourced from AGMARKNET were used. Multivariate cointegration showed that all the selected gram markets were cointegarted in the long-run, meaning long-run price association among these markets. The degree of market integration observed is consistent with the view that Rajasthan state gram markets are quite competitive; thus, provide little justification for extensive and costly government intervention designed to enhance market efficiency through improve competitiveness. Therefore, in order to sustain the present system of market integration, there is need to evolve mechanism that will generate market information and market intelligence which would serve as a platform for guiding farmers in marketing their produce

Sustainable use of natural and chemical coagulants for contaminants removal from palm oil mill effluent : a comparative analysis

This article aimed at determining the optimum coagulant dose for various coagulants. This is to ascertain coagulant with the potential for higher removal of contaminants. By fixing the initial pH, settling time, coagulant aid dose, rapid mixing speed & time, slow mixing speed & time as constant parameters, the study assessed the process efficiency in terms of percentage removals for TSS, oil & grease, COD, NH3-N, turbidity and colour. The results indicated that the optimum dosage for FeCl3, moringa oleifera, aluminum sulphate, chitosan and zeolite was found to be 1000, 2000, 4000, 400 and 1000 mg/L, respectively. Results were analysed using the one-way analysis of variance (One-Way ANOVA) of Statistical Package for Social Sciences (SPSS) Version 17 where P-values for all contaminants tested across various coagulants and their dosages found to be <0.05. Thus, the null hypothesis is discredited which indicate there is significant improvement in the removal efficiencies

Evaluation of the physical, chemical, bacteriological and trace metals concentrations in different brands of packaged drinking water

—Human survival largely depends on potable water quality. This study used current analytical procedures and compared with the National Agency for Food and Drug Administration Control (NAFDAC) drinking water specification to evaluate the physio-chemical and microbiological characteristics of fifteen packaged water brands that are available locally. Atomic absorption spectroscopy was used to determine trace metals while instrumental techniques determined the physical and chemical parameters. The evaluation focused on the pH, colour, total dissolved solids, turbidity, dissolved oxygen, fluoride, chloride, iron, zinc, magnesium, calcium, potassium, and sodium. In all the samples examined, chromium, manganese, cadmium, and copper were not detected. However, total bacterial counts were discovered in samples (S1, S2, S3, B1 and B2) with values of 2, 3, 5, 3 and 1 cfu/100 ml, respectively. Packaged water containing these type and quantity of bacteria are not fit for consumption by human beings. It requires the most appropriate techniques for processing