Water in Metro Cebu: The Case for Policy and Institutional Reforms

Over the past decade, Metro Cebu has been rapidly moving toward growth and industrialization contributing as much as 70 percent to Visayas’ industrial output. However, associated with this progress are the concerns of various sectors about the quality of water services. Only 23 percent of the total households and a very small portion of industrial and commercial sectors are serviced by the Metro Cebu Water District. Hence, the large majority of households, industrial and commercial firms have to rely on private wells and private water vendors. This paper examines the policy and institutional factors that may be preventing the efficient, equitable and sustainable Metro Cebu’s water resource management. It also provides policy areas through which policy and institutional reforms can be implemented.water sector, water allocation, governance

The vanishing limit of the square-well fluid: the adhesive hard sphere model as a reference system

We report a simulation study of the gas-liquid critical point for the square-well potential, for values of well width delta as small as 0.005 times the particle diameter sigma. For small delta, the reduced second virial coefficient at the critical point B_2*c is found to depend linearly on delta. The observed weak linear dependence is not sufficient to produce any significant observable effect if the critical temperature T_c is estimated via a constant B_2*c assumption, due to the highly non linear transformation between B_2*c and T_c. This explains the previously observed validity of the law of corresponding states. The critical density rho_c is also found to be constant when measured in units of the cubed average distance between two bonded particles (1+0.5 delta)/sigma. The possibility of describing the delta -> 0 dependence with precise functional forms provides improved acccurate estimates of the critical parameters of the adhesive hard-sphere AHS model.Comment: 14 pages, 4 figures, 2 table

On the molecular structure of uranium dicarbide: T-shape versus linear isomers

A theoretical study of the molecular structure of uranium dicarbide has been carried out employing DFT, coupled cluster, and multiconfigurational methods. A triangular species, corresponding to a 5A 2 electronic state, has been found to be the most stable UC 2 species. A triplet linear CUC species, which has been observed in recent infrared spectroscopy experiments, lies much higher in energy. A topological analysis of the electronic density has also been carried out. The triangular species is shown to be in fact a T-shape structure with a U-C interaction which can be considered to be a closed-shell interaction.Fil: Zalazar, Maria Fernanda. Universidad Nacional del Nordeste. Facultad de Ciencias Exactas y Naturales y Agrimensura. Departamento de Química. Laboratorio de Estructura Molecular y Propiedades; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste; ArgentinaFil: Rayon, Victor M.. Universidad de Valladolid. Facultad de Ciencias; EspañaFil: Largo, Antonio. Universidad de Valladolid. Facultad de Ciencias; Españ

Molecular structure of uranium carbides: Isomers of UC3

In this article, the most relevant isomers of uranium tricarbide are studied through quantum chemical methods. It is found that the most stable isomer has a fan geometry in which the uranium atom is bonded to a quasilinear C3 unit. Both, a rhombic and a ring CU(C2) structures are found about 104–125 kJ/mol higher in energy. Other possible isomers including linear geometries are located even higher. For each structure, we provide predictions for those molecular properties (vibrational frequencies, IR intensities, dipole moments) that could eventually help in their experimental detection. We also discuss the possible routes for the formation of the different UC3 isomers as well as the bonding situation by means of a topological analysis of the electron densityFil: Zalazar, Maria Fernanda. Universidad Nacional del Nordeste. Facultad de Cs.exactas Naturales y Agrimensura. Departamento de Quimica. Laboratorio de Estructura Molecular y Propiedades; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Rayon, Victor M.. Universidad de Valladolid. Facultad de Ciencias; EspañaFil: Largo, Antonio. Universidad de Valladolid. Facultad de Ciencias; Españ

Sustainable solutions for the construction sector: integration of secondary raw materials in the production cycle of concrete

The construction industry is one of the largest consumers of raw materials and energy and one of the highest contributor to green-houses gases emissions. In order to become more sustainable it needs to reduce the use of both raw materials and energy, thus lim-iting its environmental impact. Developing novel technologies to integrate secondary raw materials (i.e. lightweight recycled aggre-gates and alkali activated “cementless” binders - geopolymers) in the production cycle of concrete is an all-inclusive solution to im-prove both sustainability and cost-efficiency of construction industry. SUS-CON “SUStainable, Innovative and Energy-Efficiency CONcrete, based on the integration of all-waste materials” is an European project (duration 2012-2015), which aim was the inte-gration of secondary raw materials in the production cycle of concrete, thus resulting in innovative, sustainable and cost-effective building solutions. This paper presents the main outcomes related to the successful scaling-up of SUS-CON concrete solutions in traditional production plants. Two European industrial concrete producers have been involved, to design and produce both pre-cast components (blocks and panels) and ready-mixed concrete. Recycled polyurethane foams and mixed plastics were used as aggre-gates, PFA (Pulverized Fuel Ash, a by-product of coal fuelled power plants) and GGBS (Ground Granulated Blast furnace Slag, a by-product of iron and steel industries) as binders. Eventually, the installation of SUS-CON concrete solutions on real buildings has been demonstrated, with the construction of three mock-ups located in Europe (Spain, Turkey and Romania

Influence of polydispersity on the critical parameters of an effective potential model for asymmetric hard sphere mixtures

We report a Monte Carlo simulation study of the properties of highly asymmetric binary hard sphere mixtures. This system is treated within an effective fluid approximation in which the large particles interact through a depletion potential (R. Roth {\em et al}, Phys. Rev. E{\bf 62} 5360 (2000)) designed to capture the effects of a virtual sea of small particles. We generalize this depletion potential to include the effects of explicit size dispersity in the large particles and consider the case in which the particle diameters are distributed according to a Schulz form having degree of polydispersity 14%. The resulting alteration (with respect to the monodisperse limit) of the metastable fluid-fluid critical point parameters is determined for two values of the ratio of the diameters of the small and large particles: $q\equiv\sigma_s/\bar\sigma_b=0.1$ and $q=0.05$. We find that inclusion of polydispersity moves the critical point to lower reservoir volume fractions of the small particles and high volume fractions of the large ones. The estimated critical point parameters are found to be in good agreement with those predicted by a generalized corresponding states argument which provides a link to the known critical adhesion parameter of the adhesive hard sphere model. Finite-size scaling estimates of the cluster percolation line in the one phase fluid region indicate that inclusion of polydispersity moves the critical point deeper into the percolating regime. This suggests that phase separation is more likely to be preempted by dynamical arrest in polydisperse systems.Comment: 11 pages, 10 figure

Effects of patch size and number within a simple model of patchy colloids

We report on a computer simulation and integral equation study of a simple model of patchy spheres, each of whose surfaces is decorated with two opposite attractive caps, as a function of the fraction $\chi$ of covered attractive surface. The simple model explored --- the two-patch Kern-Frenkel model --- interpolates between a square-well and a hard-sphere potential on changing the coverage $\chi$. We show that integral equation theory provides quantitative predictions in the entire explored region of temperatures and densities from the square-well limit $\chi = 1.0$ down to $\chi \approx 0.6$. For smaller $\chi$, good numerical convergence of the equations is achieved only at temperatures larger than the gas-liquid critical point, where however integral equation theory provides a complete description of the angular dependence. These results are contrasted with those for the one-patch case. We investigate the remaining region of coverage via numerical simulation and show how the gas-liquid critical point moves to smaller densities and temperatures on decreasing $\chi$. Below $\chi \approx 0.3$, crystallization prevents the possibility of observing the evolution of the line of critical points, providing the angular analog of the disappearance of the liquid as an equilibrium phase on decreasing the range for spherical potentials. Finally, we show that the stable ordered phase evolves on decreasing $\chi$ from a three-dimensional crystal of interconnected planes to a two-dimensional independent-planes structure to a one-dimensional fluid of chains when the one-bond-per-patch limit is eventually reached.Comment: 26 pages, 11 figures, J. Chem. Phys. in pres

Urban Water Pricing: The Metro Manila and Metro Cebu Cases

Water is a critical commodity for human survival and a scarce resource that must be appropriately priced to ensure that it is not wastefully and unsuitably consumed. This Notes offers an optimal pricing scheme, together with suggestions on the improvement of the overall water resource management that could provide the proper environment by which such pricing scheme can succeed.urban management, water sector, water demand

Synovial inflammation in an experimental model of metabolic syndrome in the rabbit

Objetivo: Analizar el efecto del síndrome metabólico (SM) sobre la inflamación sinovial en un modelo experimental en conejo. Material y métodos: Se probaron tres intervenciones dietéticas diferentes para inducir un modelo experimental de SM, en 21 conejos New Zealand hembra, de 8 meses de edad: 1) alimentación con dieta enriquecida con 1% de colesterol y 3% de aceite de cacahuete y agua ad libitum; 2) alimentación con dieta normal y agua con 30% de fructosa ad libitum; 3) alimentación con dieta enriquecida con 1% de colesterol y 3% de aceite de cacahuete y agua con 30% de fructosa ad limitum. Los animales se dejaron evolucionar durante 12 semanas y se hizo un seguimiento semanal de peso, glucosa basal, colesterol HDL, triglicéridos. Tras el sacrificio, se tomaron muestras de membrana sinovial para cuantificar el infiltrado macrofágico sinovial mediante inmunohistoquímica. Resultados: La única intervención dietética con la que conseguimos inducir alteraciones asociadas al SM en los conejos fue alimentándolos con una dieta hiperlipémica. Estos animales, además de presentar hiperglucemia y dislipemia, tenían un infiltrado macrofágico sinovial mayor que el del grupo control. Conclusión: La alimentación con dieta hiperlipémica induce alteraciones típicas del SM en el conejo, acompañadas de un aumento del infiltrado macrofágico sinovial, lo que sugiere que el macrófago podría desempeñar un papel importante en el inicio y/o la progresión de la artrosis descrita que se asocia con el SMObjetive: To analyze the effect of metabolic syndrome (MS) upon synovial inflammation in an experimental model in the rabbit. Material and methodology: Three different diets were used to induce an experimental model of MS in 21 female New Zealand rabbits (aged 8 months): 1) diet enriched with 1% cholesterol and 3% peanut oil, with water, ad libitum; 2) normal diet, with water, and 30% fructose, ad libitum; 3) diet enriched with 1% cholesterol and 3% peanut oil, with water, and 30% fructose, ad libitum. The animals were followed-up on for 12 weeks, with weekly monitoring of body weight, basal glucose, HDL-cholesterol and triglycerides. Following sacrifice, synovial membrane samples were collected to quantify the synovial macrophage infiltrate using immunohistochemical techniques. Results: The only diet to induce alterations associated with MS in the rabbits was the hyperlipidemic diet. These animals, in addition to presenting hyperglycemia and dyslipidemia, showed greater synovial macrophage infiltration than the control group. Conclusion: A hyperlipidemic diet induces alterations typical of MS in the rabbit, accompanied by an increase in synovial macrophage infiltrationEsta investigación ha sido financiada por FUNDACIÓN MAPFR

An Inquiry into the Competitiveness of Emerging Philippine Cities

This paper attempts to approximate the competitiveness of the country’s ten leading emerging urban centers: Angeles, Baguio, Cagayan de Oro, Davao City, General Santos, Iligan, Iloilo, San Fernando La Union, Tacloban and Zamboanga. The study uses both ranking and scoring methods to rate the cities in eight major drivers: cost competitiveness, human resources endowment, infrastructure, linkages with major urban centers and growth areas, quality of life, responsive of local government units and dynamism of local economy. It best serves as a policy and urban management tool for concerned local officials and leaders of various private sector groups in identifying the cities’ strength and areas of improvement. Insights on overall scores and rankings point to the importance of local leadership, emphasis on improving quality of lives in urban centers and the role of surrounding local and/or international growth formations in enhancing urban competitiveness. Any combination of these factors actually explains the high rankings garnered by General Santos City, Angeles City and Baguio.urban management, urbanization, competitiveness, urban development