First measurements of the number size distribution of 1-2nm aerosol particles released from manufacturing processes in a cleanroom environment

This study was conducted to observe a potential formation and/or release of aerosol particles related to manufacturing processes inside a cleanroom. We introduce a novel technique to monitor airborne sub 2nm particles in the cleanroom and present results from a measurement campaign during which the total particle number concentration (>1nm and >7 nm) and the size resolved concentration in the 1 to 2nm size range were measured. Measurements were carried out in locations where atomic layer deposition (ALD), sputtering, and lithography processes were conducted, with a wide variety of starting materials. During our campaign in the clean room, we observed several time periods when the particle number concentration was 10(5) cm(-3) in the sub 2nm size range and 10(4) cm(-3) in the size class larger than 7nm in one of the sampling locations. The highest concentrations were related to the maintenance processes of the manufacturing machines, which were conducted regularly in that specific location. Our measurements show that around 500cm(-3) sub 2nm particles or clusters were in practice always present in this specific cleanroom, while the concentration of particles larger than 2nm was less than 2cm(-3). During active processes, the concentrations of sub 2nm particles could rise to over 10(5) cm(-3) due to an active new particle formation. The new particle formation was most likely induced by a combination of the supersaturated vapors, released from the machines, and the very low existing condensation sink, leading to pretty high formation rates J(1.4 nm) = (9 4) cm(-3) s(-1) and growth rates of particles (GR(1.1-1.3 nm) = (6 +/- 3) nm/h and GR(1.3-1.8 nm) = (14 +/- 3) nm/h).Copyright (c) 2017 American Association for Aerosol ResearchPeer reviewe

Infrared microspectroscopic determination of collagen cross-links in articular cartilage

Collagen forms an organized network in articular cartilage to give tensile stiffness to the tissue. Due to its long half-life, collagen is susceptible to cross-links caused by advanced glycation end-products. The current standard method for determination of cross-link concentrations in tissues is the destructive high-performance liquid chromatography (HPLC). The aim of this study was to analyze the cross-link concentrations nondestructively from standard unstained histological articular cartilage sections by using Fourier transform infrared (FTIR) microspectroscopy. Half of the bovine articular cartilage samples (n = 27) were treated with threose to increase the collagen cross-linking while the other half (n = 27) served as a control group. Partial least squares (PLS) regression with variable selection algorithms was used to predict the cross-link concentrations from the measured average FTIR spectra of the samples, and HPLC was used as the reference method for cross-link concentrations. The correlation coefficients between the PLS regression models and the biochemical reference values were r = 0.84 (p <0.001), r = 0.87 (p <0.001) and r = 0.92 (p <0.001) for hydroxylysyl pyridinoline (HP), lysyl pyridinoline (LP), and pentosidine (Pent) cross-links, respectively. The study demonstrated that FTIR microspectroscopy is a feasible method for investigating cross-link concentrations in articular cartilage. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.Peer reviewe

Alarming development of dual snus and cigarette usage among young Finnish males

Background The consumption of tobacco products has evolved to include more complex combinations of different products. We investigated the tobacco habits of a representative population of young Finnish male conscripts in order to evaluate the prevalence of dual use of cigarettes and snus as well as the transition from one tobacco product to another. In addition, we evaluated the correlation between the level of education and the use of cigarettes and snus. Methods A questionnaire-based survey was carried out in three out of 17 garrisons among conscripts during their first week of service in 2014. A total of 1971 male conscripts were selected by simple random sampling of the 9013 males in the selected garrisons. Of them 1916 participated and filled in the questionnaire. The response rate was 97.2%. The questionnaire consisted of 25 questions including age, gender, basic education, use of tobacco products as well as questions assessing nicotine dependency. Results The amount of dual users of cigarettes and snus was 21%. There was a higher probability of dual use of cigarettes and snus among smokers compared to snus users (p < 0.001). One third (35%) of former smokers reported daily snus use and over 40% of the former snus users smoked daily. One third (34%) of the participants reported snus usage and 14% of the study subjects used snus daily. 40% of the study population were smokers and over 25% smoked daily. Of the participants with basic educational background 57% smoked daily (p < 0.001), however, no association between snus and level of education was found (p = 0.69). Conclusions This study provides better understanding of the complex tobacco habits of young adult males. The simultaneous usage of multiple tobacco products as well as the high tendency to transition from one tobacco product to another should be taken into consideration when planning cessation interventions in health care settings and tobacco control policies at societal levels

Classification of patients with knee osteoarthritis in clinical phenotypes: data from the osteoarthritis initiative

<div><p>Objectives</p><p>The existence of phenotypes has been hypothesized to explain the large heterogeneity characterizing the knee osteoarthritis. In a previous systematic review of the literature, six main phenotypes were identified: Minimal Joint Disease (MJD), Malaligned Biomechanical (MB), Chronic Pain (CP), Inflammatory (I), Metabolic Syndrome (MS) and Bone and Cartilage Metabolism (BCM). The purpose of this study was to classify a sample of individuals with knee osteoarthritis (KOA) into pre-defined groups characterized by specific variables that can be linked to different disease mechanisms, and compare these phenotypes for demographic and health outcomes.</p><p>Methods</p><p>599 patients were selected from the OAI database FNIH at 24 months’ time to conduct the study. For each phenotype, cut offs of key variables were identified matching the results from previous studies in the field and the data available for the sample. The selection process consisted of 3 steps. At the end of each step, the subjects classified were excluded from the further classification stages. Patients meeting the criteria for more than one phenotype were classified separately into a ‘complex KOA’ group.</p><p>Results</p><p>Phenotype allocation (including complex KOA) was successful for 84% of cases with an overlap of 20%. Disease duration was shorter in the MJD while the CP phenotype included a larger number of Women (81%). A significant effect of phenotypes on WOMAC pain (F = 16.736 p <0.001) and WOMAC physical function (F = 14.676, p < 0.001) was identified after controlling for disease duration.</p><p>Conclusion</p><p>This study signifies the feasibility of a classification of KOA subjects in distinct phenotypes based on subgroup-specific characteristics.</p></div

Effects of Processing Residual Stresses on Fatigue Crack Growth Behavior of Structural Materials: Experimental Approaches and Microstructural Mechanisms

Fatigue crack growth mechanisms of long cracks through fields with low and high residual stresses were investigated for a common structural aluminum alloy, 6061-T61. Bulk processing residual stresses were introduced in the material by quenching during heat treatment. Compact tension (CT) specimens were fatigue crack growth (FCG) tested at varying stress ratios to capture the closure and Kmax effects. The changes in fatigue crack growth mechanisms at the microstructural scale are correlated to closure, stress ratio, and plasticity, which are all dependent on residual stress. A dual-parameter ΔK-Kmax approach, which includes corrections for crack closure and residual stresses, is used uniquely to connect fatigue crack growth mechanisms at the microstructural scale with changes in crack growth rates at various stress ratios for low- and high-residual-stress conditions. The methods and tools proposed in this study can be used to optimize existing materials and processes as well as to develop new materials and processes for FCG limited structural applications

Association Between Maternal Diabetes in Utero and Age at Offspring's Diagnosis of Type 2 Diabetes

OBJECTIVE—The purpose of this study was to examine age of diabetes diagnosis in youth who have a parent with diabetes by diabetes type and whether the parent's diabetes was diagnosed before or after the youth's birth

Functional analysis of Ectodysplasin-A mutations causing selective tooth agenesis.

Mutations of the Ectodysplasin-A (EDA) gene are generally associated with the syndrome hypohidrotic ectodermal dysplasia (MIM 305100), but they can also manifest as selective, non-syndromic tooth agenesis (MIM300606). We have performed an in vitro functional analysis of six selective tooth agenesis-causing EDA mutations (one novel and five known) that are located in the C-terminal tumor necrosis factor homology domain of the protein. Our study reveals that expression, receptor binding or signaling capability of the mutant EDA1 proteins is only impaired in contrast to syndrome-causing mutations, which we have previously shown to abolish EDA1 expression, receptor binding or signaling. Our results support a model in which the development of the human dentition, especially of anterior teeth, requires the highest level of EDA-receptor signaling, whereas other ectodermal appendages, including posterior teeth, have less stringent requirements and form normally in response to EDA mutations with reduced activity