809 research outputs found
Converter design techniques and applications
Transistorized direct current voltage converters offer a number of advantages over other types because of their small size, low weight, high efficiency, high reliability, precision accuracy and wide range of control. There are three basic types of converter subsystems: series converter in which a voltage-controlled component is placed in series with the load; shunt converter in which a current-controlled component is placed in shunt with the load; and a switching converter in which a voltage-controlled component is turned on and off in series with the load. Converters employing any of these three types of subsystems can provide constant voltage, constant current, or constant impedance across the load. Design and application considerations, step-by-step design procedures, and the solution to sample design problems for the series, shunt, and switching types are presented
Photovoltaic power system reliability considerations
An example of how modern engineering and safety techniques can be used to assure the reliable and safe operation of photovoltaic power systems is presented. This particular application is for a solar cell power system demonstration project designed to provide electric power requirements for remote villages. The techniques utilized involve a definition of the power system natural and operating environment, use of design criteria and analysis techniques, an awareness of potential problems via the inherent reliability and FMEA methods, and use of fail-safe and planned spare parts engineering philosophy
Measurement of control system response using an analog operational circuit
Ten basic steps are established for an analog method that measures control system response parameters. An example shows how these steps were used on a speed control portion of an auxiliary power unit. The equations and calculations necessary to describe this subsystem are given. The mechanization schematic and simulation diagram for obtaining the measured response parameters of the control system using an analog circuit are explained. Methods for investigating the various effects of the control parameters are described. It is concluded that the optimum system should be underdamped enough to be slightly oscillatory during transients
Pyrotechnic device provides one-shot heat source
Pyrotechnic heater provides a one-shot heat source capable of creating a predetermined temperature around sealed packages. It is composed of a blend of an active chemical element and another compound which reacts exothermically when ignited and produces fixed quantities of heat
Model 0A wind turbine generator FMEA
The results of Failure Modes and Effects Analysis (FMEA) conducted for the Wind Turbine Generators are presented. The FMEA was performed for the functional modes of each system, subsystem, or component. The single-point failures were eliminated for most of the systems. The blade system was the only exception. The qualitative probability of a blade separating was estimated at level D-remote. Many changes were made to the hardware as a result of this analysis. The most significant change was the addition of the safety system. Operational experience and need to improve machine availability have resulted in subsequent changes to the various systems which are also reflected in this FMEA
ASDTIC: A feedback control innovation
The ASDTIC (Analog Signal to Discrete Time Interval Converter) control subsystem provides precise output control of high performance aerospace power supplies. The key to ASDTIC operation is that it stably controls output by sensing output energy change as well as output magnitude. The ASDTIC control subsystem and control module were developed to improve power supply performance during static and dynamic input voltage and output load variations, to reduce output voltage or current regulation due to component variations or aging, to maintain a stable feedback control with variations in the loop gain or loop time constants, and to standardize the feedback control subsystem for power conditioning equipment
Traveling-wave tube reliability estimates, life tests, and space flight experience
Infant mortality, useful life, and wearout phase of twt life are considered. The performance of existing developmental tubes, flight experience, and sequential hardware testing are evaluated. The reliability history of twt's in space applications is documented by considering: (1) the generic parts of the tube in light of the manner in which their design and operation affect the ultimate reliability of the device, (2) the flight experience of medium power tubes, and (3) the available life test data for existing space-qualified twt's in addition to those of high power devices
Reliability approach to rotating-component design
A probabilistic methodology for designing rotating mechanical components using reliability to relate stress to strength is explained. The experimental test machines and data obtained for steel to verify this methodology are described. A sample mechanical rotating component design problem is solved by comparing a deterministic design method with the new design-by reliability approach. The new method shows that a smaller size and weight can be obtained for specified rotating shaft life and reliability, and uses the statistical distortion-energy theory with statistical fatigue diagrams for optimum shaft design. Statistical methods are presented for (1) determining strength distributions for steel experimentally, (2) determining a failure theory for stress variations in a rotating shaft subjected to reversed bending and steady torque, and (3) relating strength to stress by reliability
Crafting Europe from CERN to Dubna: Physics as Diplomacy in the Foundation of the European Physical Society
The year 1968 is universally considered a watershed in history, as the world was experiencing an accelerated growth of anti-establishment protests that would have long-lasting impacts on the cultural, social, and political spheres of human life. On September 26, amid social and political unrest across the globe, 62 physicists gathered in Geneva to found the European Physical Society. Among these were the official representatives of the national physical societies of 18 countries in both Eastern and Western Europe, who signed the constitution in spite of the political divides of the Cold War. According to the main proponent of the society, Italian physicist Gilberto Bernardini, the success of the initiative was the realization of a dream: the institutional formation of a single community of European physicists, a representation of a culturally unified Europe that he described as a “single highly civilized nation.” The analysis of as yet unexplored archival materials of Bernardini and other protagonists in the establishment of the society has enabled an investigation of the historical development of science diplomacy in two interconnected ways: first, by elucidating how the actors involved, especially those in Western Europe, interpreted their role as diplomats amid particularly turbulent reconfigurations of international political relations; second, by interpreting the attempt to institutionalize transnational scientific networks with the establishment of a non-governmental organization as a tool to influence world political affairs. It will first be shown that the political ideal of a culturally unified Europe was deeply intertwined with the socio-professional interests of a specific community, mostly involved with CERN. I will argue that, in the process of establishing the society, the invasion of Czechoslovakia by Warsaw Pact armed forces led many of the Western physicists involved in this process to reframe the role of the European Physical Society as a tool to diffuse liberal-democratic values and to support political dissidents in Eastern Europe
- …