310 research outputs found
Selection of China's top leadership cadre: the roles of supreme leaders, factional networks, and candidate attributes
This article provides empirical evidence to show how the general secretaries of the Chinese Communist Party dominated provincial personnel through their factional ties. Based on panel data from 1993 to 2017, this study finds that the provincial leaders' personal connections with the incumbent party head significantly increased their promotion chances. The positive effect of the incumbent party heads on promotion did not depend on provincial leaders' economic performance and seniority. This study further uncovers that working experiences in the prefectural leading positions strongly increased the likelihood of promotion. However, connections with other important top leaders did not have similar effects. These findings challenge the traditional wisdom on the collective leadership and indicate the dominance of the Chinese Communist Party's heads for provincial personnel arrangements
Structural Behaviour of Lapped Cold-Formed Steel Z-Shaped Purlin Connections with Vertical Slotted Holes
Lapped joints of cold-formed steel (CFS) Z-shaped purlins are extensively used in metal building roof systems. The research that has been carried out so far for these lapped connections is primarily focused on connections with round holes. However, the lapped connections with vertical slotted holes are extensively used in current construction practice to simplify the erection of continuous Z-shaped roof purlins. There is no design guideline or recommendation available for CFS Z-purlin lapped connections with vertical slotted holes.
Presented in this paper are the results of an experimental study and analysis of the structural behaviour of lapped CFS Z-shaped purlin connections with vertical slotted holes. 42 flexural tests were performed on lapped CFS Z-shaped purlins with vertical slotted connections with different lap lengths, purlin depths, thicknesses and spans. The flexural strength and deflection of each specimen were measured. The characteristics of moment resistance and flexure stiffness of the lapped purlins were computed. The test results show that the lapped purlins with vertical slotted holes may be more flexible than the lapped purlins with round holes or continuous purlins without lapped joint. Thus, the slotted connections may need greater lap lengths to achieve full stiffness of continuous purlins. The results also indicate that the characteristics of moment resistance and flexural stiffness in the slotted connections are dependent on the ratio of lap length to purlin depth, the ratio of lap length to purlin thickness, the ratio of purlin depth to purlin thickness, and the ratio of lap length to span. Based on the results, design recommendations for evaluating the moment resistance and flexural stiffness of lapped slotted connections were proposed
Relationship between Hard and Soft X-ray Emission Components of a Solar Flare
X-ray observations of solar flares routinely reveal an impulsive high-energy
and a gradual low-energy emission component, whose relationship is one of the
key issues of solar flare study. The gradual and impulsive emission components
are believed to be associated with, respectively, the thermal and nonthermal
components identified in spectral fitting. In this paper, a prominent about 50
second hard X-ray (HXR) pulse of a simple GOES class C7.5 flare on 20 February
2002 is used to study the association between high energy, non-thermal and
impulsive evolution, and low energy, thermal and gradual evolution. We use
regularized methods to obtain time derivatives of photon fluxes to quantify the
time evolution as a function of photon energy, obtaining a break energy between
impulsive and gradual behavior. These break energies are consistent with a
constant value of about 11 keV in agreement with those found spectroscopically
between thermal and non-thermal components, but the relative errors of the
former are greater than 15% and much greater than the a few percent errors
found from the spectral fitting. These errors only weakly depend on assuming an
underlying spectral model for the photons, pointing to the current data being
inadequate to reduce the uncertainties rather than there being a problem
associated with an assumed model. The time derivative method is used to test
for the presence of a 'pivot energy' in this flare. Although these pivot
energies are marginally consistent with a constant value of about 9 keV, its
values in the HXR rise phase appear to be lower than those in the decay phase
FF-LINS: A Consistent Frame-to-Frame Solid-State-LiDAR-Inertial State Estimator
Most of the existing LiDAR-inertial navigation systems are based on
frame-to-map registrations, leading to inconsistency in state estimation. The
newest solid-state LiDAR with a non-repetitive scanning pattern makes it
possible to achieve a consistent LiDAR-inertial estimator by employing a
frame-to-frame data association. In this letter, we propose a robust and
consistent frame-to-frame LiDAR-inertial navigation system (FF-LINS) for
solid-state LiDARs. With the INS-centric LiDAR frame processing, the keyframe
point-cloud map is built using the accumulated point clouds to construct the
frame-to-frame data association. The LiDAR frame-to-frame and the inertial
measurement unit (IMU) preintegration measurements are tightly integrated using
the factor graph optimization, with online calibration of the LiDAR-IMU
extrinsic and time-delay parameters. The experiments on the public and private
datasets demonstrate that the proposed FF-LINS achieves superior accuracy and
robustness than the state-of-the-art systems. Besides, the LiDAR-IMU extrinsic
and time-delay parameters are estimated effectively, and the online calibration
notably improves the pose accuracy. The proposed FF-LINS and the employed
datasets are open-sourced on GitHub (https://github.com/i2Nav-WHU/FF-LINS)
The Barcelona ionospheric mapping function (BIMF) and its application to northern mid-latitudes
This is a post-peer-review, pre-copyedit version of an article published in Gps solutions. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10291-018-0731-0A simple way of improving the Global Navigation Satellite Systems (GNSS) slant ionospheric correction from Vertical Total Electron Content (VTEC) models is presented. In many GNSS applications, a mapping function is required to convert from VTEC, which may be provided in Global Ionospheric Maps (GIMs), to Slant TEC (STEC). Typical approaches assume a single ionospheric shell with constant height, which is unrealistic, especially for low-elevation signals. To reduce the associated conversion error, we propose the Barcelona Ionospheric Mapping Function and its first implementation at northern mid-latitudes (BIMF-nml). BIMF is based on a climatic prediction of the distribution of the topside vertical electron content fraction of VTEC (hereinafter µ2). BIMF is convenient to be applied since no external data are required in practice. To evaluate its performance, we use as independent reference the STEC difference (so-called dSTEC) values directly measured from mid-latitude dual-frequency Global Positioning System (GPS) receivers that have not been used in the computation of the VTEC GIMs under assessment. It is shown that the use of BIMF improves the GIM STEC estimation compared to the single-layer assumptions. This is the case for the mapping functions used by the International GNSS Service (IGS) and Satellite-Based Augmentation Systems (SBAS). This improvement is valid not only for the UPC GIMs, up to 15% for the year 2014, but especially for the GIMs of other analysis centers, such as those produced by CODE and JPL, up to 32 and 29%, respectively.Peer ReviewedPostprint (author's final draft
A Molecular-Splicing Strategy for Constructing a Near-Infrared Fluorescent Probe for UDP-Glucuronosyltransferase 1A1
UDP-glucuronosyltransferase 1A1 (UGT1A1) is a vital metabolic enzyme responsible for the clearance of endogenous substances and drugs. Hitherto, the development of fluorescent probes for UGTs was severely restricted due to the poor isoform selectivity and on–off or blue-shifted fluorescence response. Herein, we established a novel “molecular-splicing” strategy to construct a highly selective near-infrared (NIR) fluorescent probe, HHC, for UGT1A1, which exhibited a NIR signal at 720 nm after UGT1A1 metabolism. HHC was then successfully used for the real-time imaging of endogenous UGT1A1 in living cells and animals and to monitor the bile excretion function. In summary, an isoform-specific NIR fluorescent probe has been developed for monitoring UGT1A1 activity in living systems, high-throughput screening of novel UGT1A1 inhibitors and visual evaluation of bile excretion function.</p
- …