An investigation of the beneficial effects of adding carbon nanotubes to standard injection grout

Mortar grouting is often used in masonry constructions to mitigate structural decay and repair damage by filling cracks and voids, resulting in an improvement in mechanical properties. This paper presents an original experimental investigation on grout with added carbon nanotubes (CNTs). The samples were prepared with different percentages of CNTs, up to 1.2 wt% with respect to the binder, and underwent three‐point bending tests in crack mouth opening displacement mode and compressive tests. The results showed that very small additions (up to 0.12 wt% of CNTs) increased not only flexural and compressive strengths (+73% and 35%, respectively, in comparison with plain mortar) but also fracture energy (+80%). These results can be explained on the basis of a reduction in porosity, as evidenced by mercury intrusion porosimetry, as well as by a crack bridging mechanism and by the probable formation of nucleation sites for hydration products, as observed through scanning electron microscopy

A new modulation technique for high data rate low power UWB wireless optical communication in implantable biotelemetry systems

We report on the development of a novel modulation technique for UWB wireless optical communication systems for application in a transcutaneous biotelemetry. The solution, based on the generation of short laser pulses, allows for a high data rate link whilst achieving a significant power reduction (energy per bit) compared to the state-of-the-art. These features make this particularly suitable for emerging biomedical applications such as implantable neural/biosensor systems. The relatively simple architecture consists of a transmitter and receiver that can be integrated in a standard CMOS technology in a compact Silicon footprint. These parts include circuits for bias and drive current generation, conditioning and processing, optimised for low-volt age/low-power operation. Preliminary experimental findings validate the new paradigm and show good agreement with expected results. The complete system achieves a BER less than 10-7, with maximum data rate of 125Mbps and estimated total power consumption of less than 3mW

Where Fail-Safe Default Logics Fail

Reiter's original definition of default logic allows for the application of a default that contradicts a previously applied one. We call failure this condition. The possibility of generating failures has been in the past considered as a semantical problem, and variants have been proposed to solve it. We show that it is instead a computational feature that is needed to encode some domains into default logic

Experimental Analysis of Heat Transfer in Passive Latent Heat Thermal Energy Storage Systems for CSP Plants

Abstract Thermal energy storage is a key factor for efficiency, dispatchability and economic sustainability of concentrated solar plants. The latent heat storage systems could ensure a significant reduction in construction costs and environmental impact, because of its high storage energy density. In LHTES, the heat transfer between the heat transfer fluid and the storage system is strongly limited by the reduced thermal conductivity of the storage media. For operating temperatures between 200 and 600 °C, the most used storage media are salts. In order to evaluate solutions which promote the thermal conductivity, by increasing the exchange surface and/or the addition of nanoparticles to the storage media, Enea set up a small facility to test some storage concepts. In this facility, a diathermic oil flows through three elementary "shell-and-tube" storage systems, connected in series, reaching a maximum temperature of about 280 °C. The elementary storage systems are filled with a mixture of sodium and potassium nitrates salts, which melt at about 225 °C. Moreover a small percentage of alumina and silica nanoparticles were added to this mixture. The results of the experiments show an increase of the thermal diffusivity of the medium not only for the presence of fins on the heat transfer tubes but also because of convective flows within the melted fraction were established. These phenomena strongly reduce the charging times of the system (by about 30%). Instead, the presence of nanoparticles increases the thermal capacity and the thermal conductivity of the storage system but seems not to have a relevant effect on the thermal diffusivity of the mixture. This behavior depends on the type of used nanoparticles, which can significantly change over time some characteristics of the storage medium, in which they are dispersed, leaving other characteristics unchanged, according to mechanisms which are still to be well understood

Integration of ground-penetrating radar, ultrasonic tests and infrared thermography for the analysis of a precious medieval rose window

Abstract. The integration of high-resolution, non-invasive geophysical techniques (such as ground-penetrating radar or GPR) with emerging sensing techniques (acoustics, thermography) can complement limited destructive tests to provide a suitable methodology for a multi-scale assessment of the state of preservation, material and construction components of monuments. This paper presents the results of the application of GPR, infrared thermography (IRT) and ultrasonic tests to the 13th century rose window of Troia Cathedral (Apulia, Italy), affected by widespread decay and instability problems caused by the 1731 earthquake and reactivated by recent seismic activity. This integrated approach provided a wide amount of complementary information at different scales, ranging from the sub-centimetre size of the metallic joints between the various architectural elements, narrow fractures and thin mortar fillings, up to the sub-metre scale of the internal masonry structure of the circular ashlar curb linking the rose window to the façade, which was essential to understand the original building technique and to design an effective restoration strategy

Pseudozyma aphidis bloodstream infection in a patient with aggressive lymphoma and a history of intravenous drug use: Case report and review of the literature

Pseudozyma aphidis is an environmental fungus which causes opportunistic infections in immunocompromised patients. Here we report the case of a 54-year-old, intravenous drug user woman, newly diagnosed to have an aggressive lymphoma, who developed a bloodstream infection caused by P. aphidis treated successfully with amphotericin-B therapy. The precise identification was assessed by sequencing. We propose to consider intravenous drug use as a risk factor for invasive infections due to this environmental yeast

Compilability of Abduction

Abduction is one of the most important forms of reasoning; it has been successfully applied to several practical problems such as diagnosis. In this paper we investigate whether the computational complexity of abduction can be reduced by an appropriate use of preprocessing. This is motivated by the fact that part of the data of the problem (namely, the set of all possible assumptions and the theory relating assumptions and manifestations) are often known before the rest of the problem. In this paper, we show some complexity results about abduction when compilation is allowed

Dynamic, but not necessarily disordered, human-virus interactions mediated through slims in viral proteins

Most viruses have small genomes that encode proteins needed to perform essential enzy-matic functions. Across virus families, primary enzyme functions are under functional constraint; however, secondary functions mediated by exposed protein surfaces that promote interactions with the host proteins may be less constrained. Viruses often form transient interactions with host proteins through conformationally flexible interfaces. Exposed flexible amino acid residues are known to evolve rapidly suggesting that secondary functions may generate diverse interaction potentials between viruses within the same viral family. One mechanism of interaction is viral mimicry through short linear motifs (SLiMs) that act as functional signatures in host proteins. Viral SLiMs display specific patterns of adjacent amino acids that resemble their host SLiMs and may occur by chance numerous times in viral proteins due to mutational and selective processes. Through mimicry of SLiMs in the host cell proteome, viruses can interfere with the protein interaction network of the host and utilize the host-cell machinery to their benefit. The overlap between rapidly evolving protein regions and the location of functionally critical SLiMs suggest that these motifs and their functional potential may be rapidly rewired causing variation in pathogenicity, infectivity, and virulence of related viruses. The following review provides an overview of known viral SLiMs with select examples of their role in the life cycle of a virus, and a discussion of the structural properties of experimentally validated SLiMs highlighting that a large portion of known viral SLiMs are devoid of predicted intrinsic disorder based on the viral SLiMs from the ELM database