Influence of malaria on the serum levels of vitamin A, zinc and calcium of children in Douala-Cameroon

Malaria is an endemic parasitic disease that prevails particularly in warm tropical regions of the world. Micronutrient malnutrition such as vitamin A and iron deficiencies which is a public health problem inCameroon is usually highly prevalent in malaria endemic areas. Characterizing the relationship between micronutrient status (vitamin A, zinc and calcium) and malaria infection among children in Douala town (Cameroon), serum levels of zinc, calcium and vitamin A, were assayed in a total of 116 Cameroonian children (62 controls and 54 malaria patients infected by Plasmodium falciparum) less than six yearsold by colorimetric and high pressure liquid chromatography (HPLC) techniques respectively showed a significantly lower vitamin A and calcium concentrations (P < 0.01) among malaria patients (0.8 ± 0.4ìmol/l and 81.3 ± 23.7 mg/l) as compared to the controls (1.1 ± 0.6 ìmol/l and 96.3 ± 16.7 mg/ml). Vitamin A, calcium and zinc status were lower in 51.85%, 51.85% and 27.27% of malaria patients respectively. Significant correlations (

Embryological staging of the Zebra Finch, Taeniopygia guttata

Zebra Finches (Taeniopygia guttata) are the most commonly used laboratory songbird species, yet their embryological development has been poorly characterized. Most studies to date apply Hamburger and Hamilton stages derived from chicken development; however, significant differences in development between precocial and altricial species suggest that they may not be directly comparable. We provide the first detailed description of embryological development in the Zebra Finch under standard artificial incubation. These descriptions confirm that some of the features used to classify chicken embryos into stages are not applicable in an altricial bird such as the Zebra Finch. This staging protocol will help to standardize future studies of embryological development in the Zebra Finch. J. Morphol. 274:1090-1110, 2013. (c) 2013 Wiley Periodicals, Inc

Segmental correction of adolescent idiopathic scoliosis by all-screw fixation method in adolescents and young adults. minimum 5 years follow-up with SF-36 questionnaire

<p>Abstract</p> <p>Background</p> <p>In our institution, the fixation technique in treating idiopathic scoliosis was shifted from hybrid fixation to the all-screw method beginning in 2000. We conducted this study to assess the intermediate -term outcome of all-screw method in treating adolescent idiopathic scoliosis (AIS).</p> <p>Methods</p> <p>Forty-nine consecutive patients were retrospectively included with minimum of 5-year follow-up (mean, 6.1; range, 5.1-7.3 years). The average age of surgery was 18.5 ± 5.0 years. We assessed radiographic measurements at preoperative (Preop), postoperative (PO) and final follow-up (FFU) period. Curve correction rate, correction loss rate, complications, accuracy of pedicle screws and SF-36 scores were analyzed.</p> <p>Results</p> <p>The average major curve was corrected from 58.0 ± 13.0° Preop to 16.0 ± 9.0° PO(<it>p </it>< 0.0001), and increased to 18.4 ± 8.6°(<it>p </it>= 0.12) FFU. This revealed a 72.7% correction rate and a correction loss of 2.4° (3.92%). The thoracic kyphosis decreased little at FFU (22 ± 12° to 20 ± 6°, (<it>p </it>= 0.25)). Apical vertebral rotation decreased from 2.1 ± 0.8 PreOP to 0.8 ± 0.8 at FFU (Nash-Moe grading, <it>p </it>< 0.01). Among total 831 pedicle screws, 56 (6.7%) were found to be malpositioned. Compared with 2069 age-matched Taiwanese, SF-36 scores showed inferior result in 2 variables: physical function and role physical.</p> <p>Conclusion</p> <p>Follow-up more than 5 years, the authors suggest that all-screw method is an efficient and safe method.</p

Understanding the adoption of business analytics and intelligence

Cruz-Jesus, F., Oliveira, T., & Naranjo, M. (2018). Understanding the adoption of business analytics and intelligence. In Á. Rocha, H. Adeli, L. P. Reis, & S. Costanzo (Eds.), Trends and Advances in Information Systems and Technologies, pp. 1094-1103. (Advances in Intelligent Systems and Computing; Vol. 745). Springer Verlag. DOI: 10.1007/978-3-319-77703-0_106Our work addresses the factors that influence the adoption of business analytics and intelligence (BAI) among firms. Grounded on some of the most prominent adoption models for technological innovations, we developed a conceptual model especially suited for BAI. Based on this we propose an instrument in which relevant hypotheses will be derived and tested by means of statistical analysis. We hope that the findings derived from our analysis may offer important insights for practitioners and researchers regarding the drivers that lead to BAI adoption in firms. Although other studies have already focused on the adoption of technological innovations by firms, research on BAI is scarce, hence the relevancy of our research.authorsversionpublishe

Comparison of LED and Conventional Fluorescence Microscopy for Detection of Acid Fast Bacilli in a Low-Incidence Setting

INTRODUCTION: Light emitting diode fluorescence microscopes have many practical advantages over conventional mercury vapour fluorescence microscopes, which would make them the preferred choice for laboratories in both low- and high-resource settings, provided performance is equivalent. METHODS: In a nested case-control study, we compared diagnostic accuracy and time required to read slides with the Zeiss PrimoStar iLED, LW Scientific Lumin, and a conventional fluorescence microscope (Leica DMLS). Mycobacterial culture was used as the reference standard, and subgroup analysis by specimen source and organism isolated were performed. RESULTS: There was no difference in sensitivity or specificity between the three microscopes, and agreement was high for all comparisons and subgroups. The Lumin and the conventional fluorescence microscope were equivalent with respect to time required to read smears, but the Zeiss iLED was significantly time saving compared to both. CONCLUSIONS: Light emitting diode microscopy should be considered by all tuberculosis diagnostic laboratories, including those in high income countries, as a replacement for conventional fluorescence microscopes. Our findings provide support to the recent World Health Organization policy recommending that conventional fluorescence microscopy be replaced by light emitting diode microscopy using auramine staining in all settings where fluorescence microscopy is currently used

Pentoxifylline as an adjunct therapy in children with cerebral malaria

<p>Abstract</p> <p>Background</p> <p>Pentoxifylline (PTX) affects many processes that may contribute to the pathogenesis of severe malaria and it has been shown to reduce the duration of coma in children with cerebral malaria. This pilot study was performed to assess pharmacokinetics, safety and efficacy of PTX in African children with cerebral malaria.</p> <p>Methods</p> <p>Ten children admitted to the high dependency unit of the Kilifi District Hospital in Kenya with cerebral malaria (Blantyre coma score of 2 or less) received quinine plus a continuous infusion of 10 mg/kg/24 hours PTX for 72 hours. Five children were recruited as controls and received normal saline instead of PTX. Plasma samples were taken for PTX and tumour necrosis factor (TNF) levels. Blantyre Coma Score, parasitemia, hematology and vital signs were assessed 4 hourly.</p> <p>Results</p> <p>One child (20%) in the control group died, compared to four children (40%) in the PTX group. This difference was not significant (p = 0.60). Laboratory parameters and clinical data were comparable between groups. TNF levels were lower in children receiving PTX.</p> <p>Conclusions</p> <p>The small sample size does not permit definitive conclusions, but the mortality rate was unexpectedly high in the PTX group.</p

Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions

The establishment of covalent junctions between carbon nanotubes (CNTs) and the modification of their straight tubular morphology are two strategies needed to successfully synthesize nanotube-based three-dimensional (3D) frameworks exhibiting superior material properties. Engineering such 3D structures in scalable synthetic processes still remains a challenge. This work pioneers the bulk synthesis of 3D macroscale nanotube elastic solids directly via a boron-doping strategy during chemical vapour deposition, which influences the formation of atomic-scale “elbow” junctions and nanotube covalent interconnections. Detailed elemental analysis revealed that the “elbow” junctions are preferred sites for excess boron atoms, indicating the role of boron and curvature in the junction formation mechanism, in agreement with our first principle theoretical calculations. Exploiting this material’s ultra-light weight, super-hydrophobicity, high porosity, thermal stability, and mechanical flexibility, the strongly oleophilic sponge-like solids are demonstrated as unique reusable sorbent scaffolds able to efficiently remove oil from contaminated seawater even after repeated use

A Diverse and Flexible Teaching Toolkit Facilitates the Human Capacity for Cumulative Culture

© 2017, The Author(s). Human culture is uniquely complex compared to other species. This complexity stems from the accumulation of culture over time through high- and low-fidelity transmission and innovation. One possible reason for why humans retain and create culture, is our ability to modulate teaching strategies in order to foster learning and innovation. We argue that teaching is more diverse, flexible, and complex in humans than in other species. This particular characteristic of human teaching rather than teaching itself is one of the reasons for human’s incredible capacity for cumulative culture. That is, humans unlike other species can signal to learners whether the information they are teaching can or cannot be modified. As a result teaching in humans can be used to support high or low fidelity transmission, innovation, and ultimately, cumulative culture