Array concepts for solid-state and vacuum microelectronics millimeter-wave generation

The authors have proposed that the increasing demand for contact watt-level coherent sources in the millimeter- and submillimeter-wave region can be satisfied by fabricating two-dimensional grids loaded with oscillators and multipliers for quasi-optical coherent spatial combining of the outputs of large numbers of low-power devices. This was first demonstrated through the successful fabrication of monolithic arrays with 2000 Schottky diodes. Watt-level power outputs were obtained in doubling to 66 GHz. In addition, a simple transmission-line model was verified with a quasi-optical reflectometer that measured the array impedance. This multiplier array work is being extended to novel tripler configurations using blocking barrier devices. The technique has also been extended to oscillator configurations where the grid structure is loaded with negative-resistance devices. This was first demonstrated using Gunn devices. More recently, a 25-element MESFET grid oscillating at 10 GHz exhibited power combining and self-locking. Currently, this approach is being extended to a 100-element monolithic array of Gunn diodes. This same approach should be applicable to planar vacuum electron devices such as the submillimeter-wave BWO (backward wave oscillator) and vacuum FET

Biased EPR entanglement and its application to teleportation

We consider pure continuous variable entanglement with non-equal correlations between orthogonal quadratures. We introduce a simple protocol which equates these correlations and in the process transforms the entanglement onto a state with the minimum allowed number of photons. As an example we show that our protocol transforms, through unitary local operations, a single squeezed beam split on a beam splitter into the same entanglement that is produced when two squeezed beams are mixed orthogonally. We demonstrate that this technique can in principle facilitate perfect teleportation utilising only one squeezed beam.Comment: 8 pages, 5 figure

A pseudo-spectral approach to inverse problems in interface dynamics

An improved scheme for computing coupling parameters of the Kardar-Parisi-Zhang equation from a collection of successive interface profiles, is presented. The approach hinges on a spectral representation of this equation. An appropriate discretization based on a Fourier representation, is discussed as a by-product of the above scheme. Our method is first tested on profiles generated by a one-dimensional Kardar-Parisi-Zhang equation where it is shown to reproduce the input parameters very accurately. When applied to microscopic models of growth, it provides the values of the coupling parameters associated with the corresponding continuum equations. This technique favorably compares with previous methods based on real space schemes.Comment: 12 pages, 9 figures, revtex 3.0 with epsf style, to appear in Phys. Rev.

Correlation between ocular elasticity and intraocular pressure on optic nerve damages

Optic neuropathy in glaucoma causes visual field loss and blindness [1]. The optic nerve damage in the lamina cribrosa (LC) of the sclera, the primary site of glaucoma, is correlated with the intraocular pressure (IOP) [2]. Literature shows that the optic nerves are sheared at high IOP and the scleral biomechanical properties play an important role in the development and progression of glaucomatous damage to the LC and ganglion cell axons with the optic nerve head (ONH). The aim of this study is to determine and characterize the correlation between the corneal, scleral and ONH elasticity, and intraocular pressure on the optic nerve damages

Correlation between ocular elasticity and intraocular pressure on optic nerve damages

Optic neuropathy in glaucoma causes visual field loss and blindness [1]. The optic nerve damage in the lamina cribrosa (LC) of the sclera, the primary site of glaucoma, is correlated with the intraocular pressure (IOP) [2]. Literature shows that the optic nerves are sheared at high IOP and the scleral biomechanical properties play an important role in the development and progression of glaucomatous damage to the LC and ganglion cell axons with the optic nerve head (ONH). The aim of this study is to determine and characterize the correlation between the corneal, scleral and ONH elasticity, and intraocular pressure on the optic nerve damages

Implementing Unitarity in Perturbation Theory

Unitarity cannot be perserved order by order in ordinary perturbation theory because the constraint UU^\dagger=\1 is nonlinear. However, the corresponding constraint for $K=\ln U$, being $K=-K^\dagger$, is linear so it can be maintained in every order in a perturbative expansion of $K$. The perturbative expansion of $K$ may be considered as a non-abelian generalization of the linked-cluster expansion in probability theory and in statistical mechanics, and possesses similar advantages resulting from separating the short-range correlations from long-range effects. This point is illustrated in two QCD examples, in which delicate cancellations encountered in summing Feynman diagrams of are avoided when they are calculated via the perturbative expansion of $K$. Applications to other problems are briefly discussed.Comment: to appear in Phys. Rev.

No-Switching Quantum Key Distribution using Broadband Modulated Coherent Light

We realize an end-to-end no-switching quantum key distribution protocol using continuous-wave coherent light. We encode weak broadband Gaussian modulations onto the amplitude and phase quadratures of light beams at the Shannon's information limit. Our no-switching protocol achieves high secret key rate via a post-selection protocol that utilizes both quadrature information simultaneously. We establish a secret key rate of 25 Mbits/s for a lossless channel and 1 kbit/s, per 17 MHz of detected bandwidth, for 90% channel loss. Since our scheme is truly broadband, it can potentially deliver orders of magnitude higher key rates by extending the encoding bandwidth with higher-end telecommunication technology.Comment: 5 pages, 3 figures, publishe

Polyamide 11-Carbon Nanotubes Nanocomposites: Preliminary Investigation

The objective of this research is to develop an improved polyamide 11 (PA11) polymer with enhanced flame retardancy, thermal, and mechanical properties for selective laser sintering (SLS) rapid manufacturing. In the present study, a nanophase was introduced into polyamide 11 via twin screw extrusion. Arkema Rilsan® polyamide 11 molding polymer pellets were used with 1, 3, 5, and 7 wt% loadings of Arkema’s GraphistrengthTM multi-wall carbon nanotubes (MWNTs) to create a family of PA11-MWNT nanocomposites. Transmission electron microscopy and scanning electron microscopy were used to determine the degree and uniformity of dispersion. Injection molded test specimens were fabricated for physical, thermal, mechanical properties, and flammability measurements. Thermal stability of these polyamide 11-MWNT nanocomposites was examined by TGA. Mechanical properties such as ultimate tensile strength, rupture tensile strength, and elongation at rupture were measured. Flammability properties were also obtained using the UL 94 test method. All these different methods and subsequent polymer characteristics are discussed in this paper.Mechanical Engineerin

Slavnov-Taylor Parameterization for the Quantum Restoration of BRST Symmetries in Anomaly-Free Gauge Theories

It is shown that the problem of the recursive restoration of the Slavnov-Taylor (ST) identities at the quantum level for anomaly-free gauge theories is equivalent to the problem of parameterizing the local approximation to the quantum effective action in terms of ST functionals, associated with the cohomology classes of the classical linearized ST operator. The ST functionals of dimension <=4 correspond to the invariant counterterms, those of dimension >4 generate the non-symmetric counterterms upon projection on the action-like sector. At orders higher than one in the loop expansion there are additional contributions to the non-invariant counterterms, arising from known lower order terms. They can also be parameterized by using the ST functionals. We apply the method to Yang-Mills theory in the Landau gauge with an explicit mass term introduced in a BRST-invariant way via a BRST doublet. Despite being non-unitary, this model provides a good example where the method devised in the paper can be applied to derive the most general solution for the action-like part of the quantum effective action, compatible with the fulfillment of the ST identities and the other relevant symmetries of the model, to all orders in the loop expansion. The full dependence of the solution on the normalization conditions is given.Comment: 23 pages. Final version published in the journa