Cross section measurements of the reactions induced by deuteron particles on ¹³C

Nuclear reactions induced by deuterons have been found to be an ideal analysis tool for depth profiling of light elements in the first microns of materials. In particular, the nonresonant nuclear reactions (d, p), (d, α) and (d, t) are well adapted to determine depth distributions of C and C in a single measurement. Nevertheless, only the cross section of the C(d, p)C nuclear reaction is well known for various experimental configurations. Thus, we measured the differential cross sections of the C(d, p)C, C(d, α)B, C(d, α)B and C(d, t)C nuclear reactions. A thin C foil (83 nm thick) was used and the measurements were performed at deuteron energies from 0.5 to 1.65 MeV for different laboratory angles of detection (135°, 150° and 165° with respect to the incident beam). Then, the results obtained in this work were compared to cross sections measured by Marion and Weber for a detection angle of 135°. © 2006 Elsevier B.V. All rights reserved

Estratégia competitiva de uma multinacional estrangeira na avicultura de postura no Brasil.

Este estudo aborda a questão das estratégias envolvidas no processo de importação de gaiolas para aves de postura, direcionadas ao centro de distribuição de uma multinacional estrangeira localizada em Araraquara, São Paulo. Identifica as razões que levam uma empresa multinacional a aumentar seus investimentos no Brasil, onde está implantando um centro de distribuição (CD). Para estudar as estratégias envolvidas no processo, realizou-se pesquisa exploratória sobre o atual processo logístico da empresa, buscando identificar tais estratégias e as vantagens do novo processo. O trabalho apoia-se nas cinco forças competitivas de Porter, na análise SWOT, nas estratégias genéricas adotadas para obtenção de retorno sobre os investimentos e ainda, fundamenta-se em temas como, importação, logística, armazenagem e centro de distribuição. A pesquisa demonstra que a implantação do CD envolve a estratégia de inserção do produto no mercado nacional, especificamente em São Paulo, onde está o maior mercado de aves de postura do País. Para obter vantagem competitiva, a multinacional adota ainda a estratégia genérica da diferenciação, com foco em tecnologia e qualidade do produto. Apesar dos altos custos da construção e manutenção do CD representarem uma barreira de entrada no mercado, o investimento não representa risco financeiro, já que aumentará a demanda pelo produto, resultando maior retorno sobre o capital investido

Competitividade de um grupo de produtores da cadeia produtiva da maçã na região de Vacaria/RS.

O objetivo deste trabalho foi identificar se um grupo de produtores da cadeia produtiva da maçã na microrregião dos Campos de Cima da Serra está enfrentando dificuldades, e quais seriam elas, bem como identificar possíveis oportunidades que possam impactar na continuidade desta cadeia, através da metodologia de pesquisa exploratória, com caráter qualitativo e quantitativo quanto à abordagem metodológica, e, descritivo-explicativa quanto aos objetivos e levantamento de bibliografia. A coleta de informações foi realizada pelo método de entrevistas semiestruturadas, por meio de questionário. Os resultados indicaram que os produtores vêm enfrentando problemas de ordem produtiva e comercial, como fatores vinculados à mão de obra e clima, estabilização de preços, baixo consumo nacional da fruta, dentre outros, podendo ser amenizados pela introdução de técnicas, variedades e controle de custos. Além disso, a introdução paralela de novas culturas similares, como uva e pêra, pode aperfeiçoar o processo produtivo pela redução do custo. Palavras-chave: Maleicultura, produtividade, competitividade

Consequences of the ion beam irradiation on the chemical durability of thorium phosphate diphosphate – kinetics study

RADIOCHIn the field of the long-term specific immobilization of actinides, thorium phosphate diphosphate (β-TPD), as potential candidate, must respond to several criteria. Among them, the material must present a good resistance to irradiation and keep its initial good properties such as resistance to aqueous alteration. In order to check this later point, sintered samples of β-TUPD solid solutions were pre-irradiated with ion beams with various conditions (fluence, stopping power) then submitted to leaching tests in different media (pH, temperature, complexing reagents, flow rate, ...). The normalized dissolution rates depend significantly on the amorphous fraction (increase by a factor of 10–100 between unirradiated and fully amorphized materials). On the contrary, the pre-irradiation of the samples does not affect the kinetic parameters of the dissolution such as the partial order relative to the proton concentration (n = 0.37 ± 0.01 and n = 0.34 ± 0.01 for unirradiated and fully amorphized samples, respectively) and the activation energy of the reaction of dissolution (Eapp = 49 ± 4 kJ mol−1 and Eapp = 42 ± 4 kJ mol−1 for unirradiated and partly amorphized samples (fA < 1), respectively)

Microstructural changes induced by low energy heavy ion irradiation in titanium silicon carbide

International audienceLow energy ion irradiation was used to investigate the microstructural modifications induced in Ti3SiC2 by nuclear collisions. Characterization of the microstructure of the pristine sample by electron back-scatter diffraction (EBSD) shows a strong texturing of TiSi2, which is a common secondary phase present in Ti3SiC2. A methodology based on atomic force microscopy (AFM) was developed to measure the volume swelling induced by ion irradiation, and it was validated on irradiated silicon carbide. The swelling of Ti3SiC2 was estimated to 2.2 ± 0.8% for an irradiation dose of 4.3 dpa at room temperature. Results obtained by both EBSD and AFM analyses showed that nuclear collisions induce an anisotropic swelling in Ti3SiC2

Comparative study of radiation-induced damage in magnesium aluminate spinel by means of IL, CL and RBS/C techniques

International audienceA comparative study of damage accumulation in magnesium aluminate spinel (MgAl2O4) has been conducted using ionoluminescence (IL), cathodoluminescence (CL) and Rutherford Backscattering Spectrometry/channeling (RBS/C) techniques. MgAl2O4 single crystal and polycrystalline samples were irradiated with 320 keV Ar+ ions at fluencies ranging from 1 × 1012 to 2 × 1016 cm−2 in order to create various levels of radiation damage. RBS/C measurements provided quantitative data about damage concentration in the samples. These values were then compared to the luminescence measurements. The results obtained by IL and RBS/C methods demonstrate a two-step character of damage buildup process. The CL data analysis points to the three-step damage accumulation mechanism involving the first defect transformation at fluencies of about 1013 cm−2 and second at about 1015 cm−2. The rate of changes resulting from the formation of nonluminescent recombination centers is clearly nonlinear and cannot be described in terms of continuous accumulation of point defects. Both, IL and CL techniques, appear as new, complementary tools bringing new possibilities in the damage accumulation studies in single- and polycrystalline materials

Understanding and simulating the material behavior during multi-particle irradiations

A number of studies have suggested that the irradiation behavior and damage processes occurring during sequential and simultaneous particle irradiations can significantly differ. Currently, there is no definite answer as to why and when such differences are seen. Additionally, the conventional multi-particle irradiation facilities cannot correctly reproduce the complex irradiation scenarios experienced in a number of environments like space and nuclear reactors. Therefore, a better understanding of multi-particle irradiation problems and possible alternatives are needed. This study shows ionization induced thermal spike and defect recovery during sequential and simultaneous ion irradiation of amorphous silica. The simultaneous irradiation scenario is shown to be equivalent to multiple small sequential irradiation scenarios containing latent damage formation and recovery mechanisms. The results highlight the absence of any new damage mechanism and time-space correlation between various damage events during simultaneous irradiation of amorphous silica. This offers a new and convenient way to simulate and understand complex multi-particle irradiation problems