The application of active controls technology to a generic hypersonic aircraft configuration

Analytical methods are described for the prediction of aerothermoelastic stability of hypersonic aircraft including active control systems. Thermal loads due to aerodynamic heating were applied to the finite element model of the aircraft structure and the thermal effects on flutter were determined. An iterative static aeroelastic trim analysis procedure was developed including thermal effects. And active control technology was assessed for flutter suppression, ride quality improvement, and gust load alleviation to overcome any potential adverse aeroelastic stability or response problems due to aerodynamic heating. A generic hypersonic aircraft configuration was selected which incorporates wing flaps, ailerons, and all moveable fins to be used for active control purposes. The active control system would use onboard sensors in a feedback loop through the aircraft flight control computers to move the surfaces for improved structural dynamic response as the aircraft encounters atmospheric turbulence

Conductivity landscape of highly oriented pyrolytic graphite surface containing ribbons and edges

We present an extensive study on electrical spectroscopy of graphene ribbons and edges of highly oriented pyrolytic graphite (HOPG) using atomic force microscope (AFM). We have addressed in the present study two main issues, (1) How does the electrical property of the graphite (graphene) sheet change when the graphite layer is displaced by shear forces? and (2) How does the electrical property of the graphite sheet change across a step edge? While addressing these two issues we observed, (1) variation of conductance among the graphite ribbons on the surface of HOPG. The top layer always exhibits more conductance than the lower layers, (2) two different monolayer ribbons on the same sheet of graphite shows different conductance, (3) certain ribbon/sheet edges show sharp rise in current, (4) certain ribbons/sheets on the same edge shows both presence and absense of the sharp rise in the current, (5) some lower layers at the interface near a step edge shows a strange dip in the current/conductance (depletion of charge). We discuss possible reasons for such rich conducting landscape on the surface of graphite.Comment: 13 pages, 9 figures. For better quality figures please contact autho

Finite temperature bosonization

Finite temperature properties of a non-Fermi liquid system is one of the most challenging probelms in current understanding of strongly correlated electron systems. The paradigmatic arena for studying non-Fermi liquids is in one dimension, where the concept of a Luttinger liquid has arisen. The existence of a critical point at zero temperature in one dimensional systems, and the fact that experiments are all undertaken at finite temperature, implies a need for these one dimensional systems to be examined at finite temperature. Accordingly, we extended the well-known bosonization method of one dimensional electron systems to finite temperatures. We have used this new bosonization method to calculate finite temperature asymptotic correlation functions for linear fermions, the Tomonaga-Luttinger model, and the Hubbard model.Comment: REVTex, 48 page

Screening and interlayer coupling in multilayer graphene field-effect transistors

With the motivation of improving the performance and reliability of aggressively scaled nano-patterned graphene field-effect transistors, we present the first systematic experimental study on charge and current distribution in multilayer graphene field-effect transistors. We find a very particular thickness dependence for Ion, Ioff, and the Ion/Ioff ratio, and propose a resistor network model including screening and interlayer coupling to explain the experimental findings. In particular, our model does not invoke modification of the linear energy-band structure of graphene for the multilayer case. Noise reduction in nano-scale few-layer graphene transistors is experimentally demonstrated and can be understood within this model as well.Comment: 13 pages, 4 figures, 20 reference

Compressibility of CeMIn5Ce M In_5 and Ce2MIn8Ce_2 M In_8 (M = Rh, Ir and Co) Compounds

The lattice parameters of the tetragonal compounds Ce$M$In$_{5}$ and Ce$_{2}M$In$_{8}$($M=$Rh, Ir and Co) have been studied as a function of pressure up to 15 GPa using a diamond anvil cell under both hydrostatic and quasihydrostatic conditions at room temperature. The addition of $M$In$_{2}$ layers to the parent CeIn$_{3}$ compound is found to stiffen the lattice as the 2-layer systems (average of bulk modulus values $B_{0}$ is 70.4 GPa) have a larger $B_{0}$ than CeIn$_{3}$ (67 GPa), while the 1-layer systems with the are even stiffer (average of $B_{0}$ is 81.4 GPa). Estimating the hybridization using parameters from tight binding calculations shows that the dominant hybridization is $fp$ in nature between the Ce and In atoms. The values of $V_{pf}$ at the pressure where the superconducting transition temperature $T_{c}$ reaches a maximum is the same for all Ce$M$In$_{5}$ compounds. By plotting the maximum values of the superconducting transition temperature $T_{c}$ versus $c/a$ for the studied compounds and Pu-based superconductors, we find a universal $T_{c}$ versus $c/a$ behavior when these quantities are normalized appropriately. These results are consistent with magnetically mediated superconductivity.Comment: Updated version resubmitted to Phys. Rev.

Assessment of recent advances in measurement techniques for atmospheric carbon dioxide and methane observations

This is the final version. Available from European Geosciences Union via the DOI in this record. Until recently, atmospheric carbon dioxide (CO2) and methane (CH4) measurements were made almost exclusively using nondispersive infrared (NDIR) absorption and gas chromatography with flame ionisation detection (GC/FID) techniques, respectively. Recently, commercially available instruments based on spectroscopic techniques such as cavity ring-down spectroscopy (CRDS), off-axis integrated cavity output spectroscopy (OA-ICOS) and Fourier transform infrared (FTIR) spectroscopy have become more widely available and affordable. This resulted in a widespread use of these techniques at many measurement stations. This paper is focused on the comparison between a CRDS "travelling instrument" that has been used during performance audits within the Global Atmosphere Watch (GAW) programme of the World Meteorological Organization (WMO) with instruments incorporating other, more traditional techniques for measuring CO2 and CH4 (NDIR and GC/FID). We demonstrate that CRDS instruments and likely other spectroscopic techniques are suitable for WMO/GAW stations and allow a smooth continuation of historic CO2 and CH4 time series. Moreover, the analysis of the audit results indicates that the spectroscopic techniques have a number of advantages over the traditional methods which will lead to the improved accuracy of atmospheric CO2 and CH4 measurements

Disentangling the climatic and biotic factors driving changes in the dynamics of Quercus suber populations across the species’ latitudinal range

We thank A.J. Muñoz‐Pajares, L. Rodríguez and G. Rutten for their help and logistic support during field sampling and M.E. Sánchez, M. Serrano and M.A. Romero for pathogen analyses and interest‐ ing discussions.Data will be available from the Dryad Digital Repository upon acceptance.Aim: Impacts of different global change drivers are altering the performance of plant species worldwide. However, these pressures usually differ across the species’ distri‐ bution range. To properly assess the combined effect of global change at species level, we need to evaluate its consequences across their complete distribution. We focused on recent decline in Cork oak (Quercus suber L.) populations given its high ecological and economic relevance. Location: We selected 10 different sites (and two populations per site) separated about one degree in latitude across the core distribution of Q. suber, following a transcontinental aridity gradient. Methods: To evaluate the current trends in population dynamics across the species’ distribution and the factors implied on population decline, we evaluated the effect of latitude, aridity, pathogens (Phytophthora cinnamomi), stand density and tree size on seed and crop size, demographic structure, dominance of recruitment bank, defolia‐ tion and mortality. Results: We found an increase in seed weight as latitude decreased, with a homogene‐ ous low crop size across the complete distribution. Demographic structure was deter‐ mined by latitude, precipitation and pathogen abundance. We detected a trend towards reduced sapling densities towards the southern edge of the distribution, with a demo‐ graphic structure dominated by old trees. The low sapling density at the southern edge translates into a loss of dominance with respect to other woody species, suggesting an alteration of community structure in the mid‐term future. Tree density, precipitation and pathogen abundance determined tree mortality across the species distribution, with a higher abundance of pathogens in central‐latitude populations. Main conclusions: Our results allow the early detection of declining trends and the evaluation of the main risks for species’ conservation, suggesting potential for range displacement of the species driven by the recruitment failure at the southern edge of the distribution and a likely range expansion at northern populations.This research was funded by the Large Research Grant (6007210) awarded from the British Ecological Society to L.M. L.G.A. acknowledges support from the MICINN project INTERCAPA (CGL‐2014‐56739‐R) and European FEDER Fund