7,180 research outputs found
Fatigue resistance of new and used nickel-titanium rotary instruments: a comparative study
Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones
Towards the Modeling of Neuronal Firing by Gaussian Processes
This paper focuses on the outline of some computational methods for the
approximate solution of the integral equations for the neuronal firing
probability density and an algorithm for the generation of sample-paths in
order to construct histograms estimating the firing densities. Our results
originate from the study of non-Markov stationary Gaussian neuronal models with
the aim to determine the neuron's firing probability density function. A
parallel algorithm has been implemented in order to simulate large numbers of
sample paths of Gaussian processes characterized by damped oscillatory
covariances in the presence of time dependent boundaries. The analysis based on
the simulation procedure provides an alternative research tool when closed-form
results or analytic evaluation of the neuronal firing densities are not
available.Comment: 10 pages, 3 figures, to be published in Scientiae Mathematicae
Japonica
In vivo evaluation of operative torque generated by two Nickel-Titanium rotary instruments during root canal preparation
Objectives This in vivo study evaluated the operative torque and preparation time of ProTaper NEXT (Dentsply Maillefer; Ballaigues, Switzerland) and EdgeFile X7 (EdgeEndo; Albuquerque, New Mexico, United States) rotary systems during root canal preparation of maxillary premolars. Materials and Methods Ten double-rooted maxillary premolars with independent canals were selected. Each canal in each tooth was prepared with one of the rotary systems (n = 10), ProTaper NEXT or EdgeFile X7. The instruments were rotated at 300 rpm with maximum torque set at 2 N.cm using an electric motor (KaVo; Biberach, Germany) that automatically recorded torque values at every 1/10th of a second (ds). Statistical Analysis Operative torque (N.cm) and preparation time (s) of the first shaping instrument (size 17/.04) of both rotary systems were recorded and statistically compared using the Mann-Whiney U test with a significance level set at 5%. Results No instrument exhibited flute deformation or underwent intracanal failure. No differences were found between the instruments regarding the maximum (peak) torque values (p > 0.05). EdgeFile X7 17/.04 required significantly less preparation time (3.75 seconds interquartile range [IQR]: 3.2-9.0) than ProTaper NEXT X1 (15.45 seconds IQR: 8.35-21.1) (p < 0.05). The median operative torque values of ProTaper NEXT X1 (0.26 N.cm; IQR: 0.18-0.49) were significantly higher compared with EdgeFile X7 17/.04 (0.09 N.cm; IQR: 0.05-0.17) (p < 0.05). Conclusions Although no difference was found between the median peak torque values of ProTaper NEXT X1 and EdgeFile X7 17/.04 instruments, the operative torque and instrumentation time results were impacted by their different designs and alloys during clinical preparation of root canals
Role of the flat-designed surface in improving the cyclic fatigue resistance of endodontic NiTi rotary instruments
The aim of this study was to investigate the role of the flat-designed surface in improving the resistance to cyclic fatigue by comparing heat-treated F-One (Fanta Dental, Shanghai, China) nickel-titanium (NiTi) rotary instruments and similar prototypes, differing only by the absence of the flat side. The null hypothesis was that there were no differences between the two tested instruments in terms of cyclic fatigue lifespan. A total of 40 new NiTi instruments (20 F-One and 20 prototypes) were tested in the present study. The instruments were rotated with the same speed (500 rpm) and torque (2 N) using an endodontic motor (Elements Motor, Kerr, Orange, CA, USA) in the same stainless steel, artificial canal (90° angle of curvature and 5 mm radius). A Wilcoxon-Mann-Whitney test was performed to assess the differences in terms of time to fracture and the length of the fractured segment between the flat- and non-flat-sided instruments. Significance was set at p = 0.05. The differences in terms of time to fracture between non-flat and flat were statistically significant (p < 0.001). In addition, the differences in terms of fractured segment length were statistically significant (p = 0.034). The results of this study highlight the importance of flat-sided design in increasing the cyclic fatigue lifespan of NiTi rotary instruments
Typing of a polymorphic human gene conferring susceptibility to insulin-dependent diabetes mellitus by picosecond-resolved FRET on non-purified/non-amplified genomic DNA
This work concerns the identification of the alleles of the polymorphic DQB1 gene of the human leukocyte antigen system, conferring susceptibility to the development of insulin-dependent diabetes mellitus (IDDM) in non-PCR amplified DNA samples and, more importantly, in crude cell extracts. Our method is based on the time-resolved analysis of a F\uf6rster energy-transfer mechanism that occurs in a dual-labelled fluorescent probe specific for the IDDM-associated DQB1-0201 allele. Such an oligonucleotide probe is labelled, at the two ends, by a pair of chromophores that operate as donor and acceptor in a F\uf6rster resonant energy transfer. The donor fluorescence is quenched with an efficiency that is strongly dependent on the donor-to-acceptor distance, hence on the configuration of the probe after hybridization with the various DQB1 alleles. By time-correlated single-photon counting, performed with an excitation/detection system endowed with 30-ps resolution, we measure the time-resolved fluorescence decay of the donor and discriminate, by means of the decaytime value, the DNA bearing the 'susceptible' allele from the DNAs bearing any other sequence in the same region of the DQB1 gene. We could also distinguish the presence of the DQB1-0201 allele in a homozygous versus a heterozygous condition
The influence of a new clinical motion for endodontic instruments on the incidence of postoperative pain
Previous studies showed that motor motions play an important role in determining apical extrusion of debris. Therefore a new clinical motion (MIMERACI) has been proposed. The basic idea is to progress slowly (1mm advancement), and after each 1mm, to remove the instrument from the canal, clean flutes and irrigate. The aim of the study was to prove whether the clinical use of MIMERACI technique would influence or not postoperative pain.MATERIALS AND METHODS:
100 teeth requesting endodontic treatment were selected for the study and divided into two similar groups based on anatomy, pre-operative symptoms and vitality, presence or absence of periapical lesion. All teeth were shaped, cleaned and obturated by the same operator, using the same NiTi instruments. The only difference between the two groups was the instrumentation technique: tradional (group A) vs MIMERACI (group B). Assessment of postoperative pain was performed 3 days after treatment. Presence, absence and degree of pain were recorded with a visual analogue scale (VAS), validated in previous studies. Collected data statistically analyzed using one-way ANOVA post hoc Tukey test.
RESULTS:
For VAS pain scores MIMERACI technique showed significantly better results than group A (p=0,031). Overall, both incidence and intensity of symptoms were significantly lower. Flare ups occurred in 3 patients, but none treated with the MIMERACI Technique.
CONCLUSIONS:
Since extruded debris can elicit more postoperative pain, results obtained by using MIMERACI technique are probably due to many factors: better mechanical removal and less production of debris and more efficient irrigation during instrumentation
Synthesis, Characterization, Fluorescence Properties, and DFT Modeling of Difluoroboron Biindolediketonates
We report a simple and efficient strategy to enhance the fluorescence of biocompatible biindole diketonates (bdks) in the visible spectrum through difluoroboronation (BF2bdks complexes). Emission spectroscopy testifies an increase in the fluorescence quantum yields from a few percent to as much as >0.7. This massive increment is essentially independent of substitutions at the indole (-H, -Cl, and -OCH3) and corresponds to a significant stabilization of the excited state with respect to non-radiative decay mechanisms: the non-radiative decay rates are reduced by as much as an order of magnitude, from 109 s−1 to 108 s−1, upon difluoroboronation. The stabilization of the excited state is large enough to enable sizeable 1O2 photosensitized production. Different time-dependent (TD) density functional theory (DFT) methods were assessed in their ability to model the electronic properties of the compounds, with TD-B3LYP-D3 providing the most accurate excitation energies. The calculations associate the first active optical transition in both the bdks and BF2bdks electronic spectra to the S0 → S1 transition, corresponding to a shift in the electronic density from the indoles to the oxygens or the O-BF2-O unit, respectively
- …