299 research outputs found
Characterization of recycled nitrile butadiene rubber industrial scraps
The amount of rubber scraps derived from rubber goods production consists of about 20-30% of the processed material, so it is necessary to enhance this material by developing new recycling techniques as well as a new market for recycled rubber products. In the present research, nitrile-butadiene rubber (NBR) scraps are reprocessed via a calendering process acting with a mechanical devulcanization. Compounds were prepared with 20%, 80%, and 100% recycled rubber content and characterized. The experimental results highlighted that the compound prepared with 20% recycled rubber content via calendering and compression molding processes shows comparable mechanical properties to that of virgin NBR. The tensile properties are the most penalized by the increasing content of recycled material (100% recycled shows - 25% and - 50% stress and strain at break, respectively). Other properties remain comparable to the standard material up to 80% recycled material: 60 +/- 5 Shore A, compression elastic modulus 8 MPa, compression set 20%. FTIR analysis revealed no changes in chemical structure from the recycling process. The results demonstrate that simple mechanical devulcanization can effectively reprocess industrial rubber waste while largely maintaining useful properties. This provides a potential pathway to enhance sustainability in rubber production through the valorization of process scraps
Environmental Impact of Surgical Masks Consumption in Italy Due to COVID-19 Pandemic
The COVID-19 pandemic suddenly changed the lifestyle of billions of people. Face masks became indispensable to protect from the contagion providing a significant environmental impact. The aim of this work is to propose possible solutions to decrease masks’ impact on the environment. For this reason, different masks (surgical and fabric) were considered, and the CO2 emissions associated with the mask materials production were calculated. Carbon Footprint (CF) for each material composing the masks was evaluated through the database Ces Selector 2019. The software Qgis (version 2.18.20) allows us to elaborate the CO2 emissions maps for each Italian region. Finally, for surgical masks, which are often imported from abroad, the CF related to transport was considered. It results that fabric masks are a sustainable solution to prevent contagion. The total CO2 emission associated with the use of fabric masks from the beginning of the pandemic (March 2020) to December 2021 resulted in about 7 kton compared to 350 kton for surgical masks
Application of benchtop total-reflection X-ray fluorescence spectrometry and chemometrics in classification of origin and type of Croatian wines
The contents of selected metals (K, Ca, Fe, Cu, Zn, Mn, Sr, Rb, Ba, Pb, Ni, Cr and V) in 70 wine samples from Continental and Adriatic part of Croatia and different types of wine (red and white) were determined by TXRF. The aim of this study was to compare the elemental composition of wines from two different regions and to determine the discriminant ability of each variable and to indicate which variables discriminate between the four categories considered. Principal component analysis and cluster analysis showed that K, Mn, Ba and Ni can be considered as the most important characteristics to distinguish between Continental red and white wines, Rb, Ni and Ba for Continental red and Adriatic red wines while Sr is the only metal that completely distinguishes the samples of each category. Finally, linear discriminant analysis showed good recognition (100%) and prediction abilities (96.43%) using these selected elements
Assessment of the influence of electric arc furnace slag as a non-conventional filler for Nitrile Butadiene Rubber
Reinforcement of polymers by the addition of particles filler is a complex phenomenon that depends mainly on the hydrodynamic effect and a complex interplay between polymer, filler, and interfacial region. Mineral fillers are usually adopted as low-cost extenders due to their lower cost. In this study, the influence of a waste material such as electric arc furnace steel slag is assessed as filler for Nitrile-Butadiene Rubber following experimental procedures and analytical calculations adopted for traditional fillers. It was found that the slag content affects the static and the dynamic properties by increasing the material's capability to storage and dissipate energy. In addition to an important contribution of the hydrodynamic effect, the presence of an increasing immobilized rubber fraction around the slag particles (quantified by a differential scanning calorimetry analysis) plays a central role. The slag stiffens the NBR composite; the increase of static tensile and dynamic shear storage moduli was found to be consistent with the Halpin-Tsai and Guth-Gold prevision models respectively. Moreover, the non-linear dynamic behavior was found to be well-fitted by the Kraus equation models. The reinforcing ability of the slag particles as filler was confirmed by the negative slope of the Kraus plot on swelling data
waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash
Abstract The present work discusses a new method, based on the use of silica fume, for heavy metal stabilization. The inertization procedure is reported and compared with other technologies, involving the employ of amorphous silica as stabilizing agent for municipal solid waste incinerator fly ash treatment (i.e. colloidal silica and rice husk ash). The obtained final materials are characterized in terms of chemical composition and phase analysis. The reported method, realized at room temperature, employs all waste or by-product materials. As a consequence it appears to be economically and environmentally sustainable
Foundry sand alkali activation for sustainable construction
Please click Additional Files below to see the full abstract
Thermo-mechanical behavior of surface acoustic waves in ordered arrays of nanodisks studied by near infrared pump-probe diffraction experiments
The ultrafast thermal and mechanical dynamics of a two-dimensional lattice of
metallic nano-disks has been studied by near infrared pump-probe diffraction
measurements, over a temporal range spanning from 100 fs to several
nanoseconds. The experiments demonstrate that, in these systems, a
two-dimensional surface acoustic wave (2DSAW), with a wavevector given by the
reciprocal periodicity of the array, can be excited by ~120 fs Ti:sapphire
laser pulses. In order to clarify the interaction between the nanodisks and the
substrate, numerical calculations of the elastic eigenmodes and simulations of
the thermodynamics of the system are developed through finite-element analysis.
At this light, we unambiguously show that the observed 2DSAW velocity shift
originates from the mechanical interaction between the 2DSAWs and the
nano-disks, while the correlated 2DSAW damping is due to the energy radiation
into the substrate.Comment: 13 pages, 10 figure
- …