A triple-GEM telescope for the TOTEM experiment

The TOTEM experiment at LHC has chosen the triple Gas Electron Multiplier (GEM) technology for its T2 telescope which will provide charged track reconstruction in the rapidity range 5.3<|eta|<6.5 and a fully inclusive trigger for diffractive events. GEMs are gas-filled detectors that have the advantageous decoupling of the charge amplification structure from the charge collection and readout structure. Furthermore, they combine good spatial resolution with very high rate capability and a good resistance to radiation. Results from a detailed T2 GEM simulation and from laboratory tests on a final design detector performed at CERN are presented.Comment: To appear in the proceedings of 10th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD06), Siena, Italy, October 1-5 200

Imaging continental shelf shallow stratigraphy by using different high-resolution seismic sources: an example from the Calabro-Tyrrhenian margin (Mediterranean Sea)

High-resolution seismic reflection profiles of the Calabro-Tyrrhenian continental shelf were collected using different seismic sources (Sub-Bottom Profiler, Uniboom, Sparker 0.5-1-4.5 kJ). Noticeable differences and results were obtained both from a geophysical and geological-interpretative point of view. The availability of different sources permitted the definition of the most suitable seismostratigraphic characterization in terms of resolution, penetration and acoustic facies. Very high resolution stratigraphy was defined through profiles produced by different seismic systems used in parallel. This permitted the application of sequence-stratigraphy concepts with the reconstruction of a thick postglacial depositional sequence, formed by a transgressive and a high-stand systems tract. The thickness distribution of postglacial deposits reveals that the main depocenter (55-65 m) is located offshore of the Coastal Range, along a stretch of coast supplied by several small and seasonal streams ("fiumare") and characterized by the lack of a coastal plain. This suggests the greater efficiency of sediment supply and bypass in this area relatively to sectors located offshore of the main rivers. The transgressive systems tract, usually thin or nearly absent, is particularly well developed (up to 33 m) and is composed of up to three parasequences with a retrogradational stacking pattern. The high-stand systems tract, up to 30 m thick, is made up of two parasequences and has a quite regular geometry and acoustic facies

Application of Technological System Based on Processes Modelling and Analysis: A Case Study in Italian Aquaculture Company

In recent years, cause of several scandals and incidents in agrifood context, consumer awareness about food product increased. That evolution of the consumer triggers new demand about transparency/accountability by the market. Food industry can face the emerging issues considering traceability principles. A traceability system could support the food companies to maneuver in the complex network of the supply chain and, simultaneously, to answer to the new consumer and market needs. In this work a theoretical approach based on business process modelling was proposed and tested in a real case study. Through an interview and using BPMN technique, the cherry cultivation process of a food companies was modelled. Each activities and actors involved in cultivation was identified in order to detect data stored in different source and format. These data could be strategical if elaborated and transmitted to different stakeholder of the supply chain

A Monitoring Framework with Integrated Sensing Technologies for Enhanced Food Safety and Traceability

A novel and low-cost framework for food traceability, composed by commercial and proprietary sensing devices, for the remote monitoring of air, water, soil parameters and herbicide contamination during the farming process, has been developed and verified in real crop environments. It offers an integrated approach to food traceability with embedded systems supervision, approaching the problem to testify the quality of the food product. Moreover, it fills the gap of missing low-cost systems for monitoring cropping environments and pesticides contamination, satisfying the wide interest of regulatory agencies and final customers for a sustainable farming. The novelty of the proposed monitoring framework lies in the realization and the adoption of a fully automated prototype for in situ glyphosate detection. This device consists of a custom-made and automated fluidic system which, leveraging on the Molecularly Imprinted Polymer (MIP) sensing technology, permits to detect unwanted glyphosate contamination. The custom electronic mainboard, called ElectroSense, exhibits both the potentiostatic read-out of the sensor and the fluidic control to accomplish continuous unattended measurements. The complementary monitored parameters from commercial sensing devices are: temperature, relative humidity, atmospheric pressure, volumetric water content, electrical conductivity of the soil, pH of the irrigation water, total Volatile Organic Compounds (VOCs) and equivalent CO (Formula presented.). The framework has been validated during the olive farming activity in an Italian company, proving its efficacy for food traceability. Finally, the system has been adopted in a different crop field where pesticides treatments are practiced. This has been done in order to prove its capability to perform first level detection of pesticide treatments. Good correlation results between chemical sensors signals and pesticides treatments are highlighted

Flatfoot in children: anatomy of decision making

Concern about a child’s foot posture is a common reason for frequent consultations for an array of health care professionals; sports medicine specialists are often the first to recognize and advise on foot pathology. In the decision making process, it is essential to distinguish between the different types of flatfoot deformity: paediatric or adult, congenital or acquired, flexible or rigid. Although flatfoot in children is a common finding, evidence for the techniques of the reliable and reproducible assessment of the foot posture is scant. This general review presents the factors involved in the forming and supporting of the foot arches, discusses the protocols useful in the evaluation of the foot posture, and indicates how to differentiate between flatfoot cases needing treatment and cases that need only reassurance

Proton-proton elastic scattering at the LHC energy of {\surd} = 7 TeV

Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at {\surd}s = 7 TeV in dedicated runs with the Roman Pot detectors placed as close as seven times the transverse beam size (sbeam) from the outgoing beams. After careful study of the accelerator optics and the detector alignment, |t|, the square of four-momentum transferred in the elastic scattering process, has been determined with an uncertainty of d t = 0.1GeV p|t|. In this letter, first results of the differential cross section are presented covering a |t|-range from 0.36 to 2.5GeV2. The differential cross-section in the range 0.36 < |t| < 0.47 GeV2 is described by an exponential with a slope parameter B = (23.6{\pm}0.5stat {\pm}0.4syst)GeV-2, followed by a significant diffractive minimum at |t| = (0.53{\pm}0.01stat{\pm}0.01syst)GeV2. For |t|-values larger than ~ 1.5GeV2, the cross-section exhibits a power law behaviour with an exponent of -7.8_\pm} 0.3stat{\pm}0.1syst. When compared to predictions based on the different available models, the data show a strong discriminative power despite the small t-range covered.Comment: 12pages, 5 figures, CERN preprin

First Results from the TOTEM Experiment

The first physics results from the TOTEM experiment are here reported, concerning the measurements of the total, differential elastic, elastic and inelastic pp cross-section at the LHC energy of $\sqrt{s}$ = 7 TeV, obtained using the luminosity measurement from CMS. A preliminary measurement of the forward charged particle $\eta$ distribution is also shown.Comment: Conference Proceeding. MPI@LHC 2010: 2nd International Workshop on Multiple Partonic Interactions at the LHC. Glasgow (UK), 29th of November to the 3rd of December 201

Elastic Scattering and Total Cross-Section in p+p reactions measured by the LHC Experiment TOTEM at sqrt(s) = 7 TeV

Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at $\sqrt{s} = 7$ TeV in special runs with the Roman Pot detectors placed as close to the outgoing beam as seven times the transverse beam size. The differential cross-section measurements are reported in the |t|-range of 0.36 to 2.5 GeV^2. Extending the range of data to low t values from 0.02 to 0.33 GeV^2,and utilizing the luminosity measurements of CMS, the total proton-proton cross section at sqrt(s) = 7 TeV is measured to be (98.3 +- 0.2(stat) +- 2.8(syst)) mb.Comment: Proceedings of the XLI International Symposium on Multiparticle Dynamics. Accepted for publication in Prog. Theor. Phy

LHC Optics Measurement with Proton Tracks Detected by the Roman Pots of the TOTEM Experiment

Precise knowledge of the beam optics at the LHC is crucial to fulfil the physics goals of the TOTEM experiment, where the kinematics of the scattered protons is reconstructed with the near-beam telescopes -- so-called Roman Pots (RP). Before being detected, the protons' trajectories are influenced by the magnetic fields of the accelerator lattice. Thus precise understanding of the proton transport is of key importance for the experiment. A novel method of optics evaluation is proposed which exploits kinematical distributions of elastically scattered protons observed in the RPs. Theoretical predictions, as well as Monte Carlo studies, show that the residual uncertainty of this optics estimation method is smaller than 0.25 percent.Comment: 20 pages, 11 figures, 5 figures, to be submitted to New J. Phy