Directed Irradiation Synthesis as an Advanced Plasma Technology for Surface Modification to Activate Porous and “as-received” Titanium Surfaces

For the design of smart titanium implants, it is essential to balance the surface properties without any detrimental effect on the bulk properties of the material. Therefore, in this study, an irradiation-driven surface modification called directed irradiation synthesis (DIS) has been developed to nanopattern porousand“as-received”c.p. Tisur faces with the aim of improving cellular viability. Nano features were developed using singly-charged argon ions at 0.5 and 1.0 keV energies, incident angles from 0◦ to 75◦ degrees, and fluences up to 5.0×1017 cm−2. Irradiated surfaces were evaluated by scanning electron microscopy, atomic force microscopy and contact angle, observing an increased hydrophilicity (a contact angle reduction of 73.4% and 49.3%) and a higher roughness on both surfaces except for higher incident angles, which showed the smoothest surface. In-vitro studies demonstrated the biocompatibility of directed irradiation synthesis (DIS) reaching 84% and 87% cell viability levels at 1 and 7 days respectively, and a lower percentage of damaged DNA in tail compared to the control c.p. Ti. All these results confirm the potential of the DIS technique to modify complex surfaces at the nanoscale level promoting their biological performance.Department of Defense (Spain) contract W81XWH-11-2-0067Ministry of Economy and Competitiveness of Spain grant MAT2015-71284-

Plant communities and landscape diversity in NW Sicily: The MEMOLA EU FP7 Project case study

The MEMOLA EU FP7 Project case study\u201d was presented at IV International Plant Science Conference (IPSC) held in Parma (Italy) on September 20-22, 2017. The poster focuses on the contribution of botany in the interdisciplinary debate of Memola Project and underline the role plant communities play in understanding the formative processes of the Mediterranean Landscapes

Sustainable Materials and Biorefinery Chemicals from Agriwastes

This is an open access chapter distributed under the terms of the Creative Commons Attribution License.-- et al.Countries with economies based on agriculture generate vast amounts of low or null value wastes which may even represent an environmental hazard. In our group, agricultural industrial wastes have been converted into value added liquid substances and materials with several aims: decreasing pollution, giving added value to wastes and working in a sustainable manner in which the wastes of an industry can be used as the raw materials of the same or others, as the “cradle to cradle” philosophy states [1]. Sub-products from the agricultural food industry are being employed as renewable low cost raw materials in the preparation of Ecomaterials, designed for use in a number of industrial processes of great interest. Given their origin, these materials may compete with conventional ones since with this process a sustainable cycle is closed, in which the residues of one industry are used as raw materials in the same or other industries [2]. With regards to the composition of the residues produced from agriculture, the pH of soil is of great importance, since plants can only absorb the minerals that are dissolved in water and pH is mandatory for the physical, chemical and biological properties of soil and the main cause of many agronomic questions related to nutrient assimilation [3-5]. Variations of pH modify the solubility of most elements necessary for the development of crops and also influence the microbian activity of soil, which will affect the transformation of elements that are liberated to the soil and can be assimilated to form crops or not [3]. For example at pH lower than 6 or higher than 8 bacterian activities are lowered, the oxidation of nitrogen to nitrate is reduced and the amount of nitrogen available for plant food is decreased. However Al, Fe and manganese are more soluble at low pHs, reaching even toxic concentrations. Potassium and sulphur are easily adsorbed at pH higher than 6, calcium and magnesium between 7 and 8.5 and iron at pH lower than 6. For alkaline pH in soil, the availability of H2PO4-can be reduced through precipitation of phosphorous containing salts withcations such as calcium Ca2+ or magnesium Mg2+. However when soils have acid pH other compounds with HPO42-and iron (Fe2+), aluminium (Al3+) and manganese (Mn2+) can form, with increased solubility. The main factors that influence soil pH are the mineral composition and how it meteorizes, the decomposition of organic matter, how nutrients are partitioned among the solution and aggregates and of course the pluviometryof the zone and atmospheric contamination.Lower pHs are found in places with high pluviometry, with high organic matter decomposition, young soils developed on acid substrates, and places with high atmospheric contamination (acid rain). Depending on the species, crops can benefit from calcareous soils with high calcium carbonate content such as alfalfa, but other plants prefer soils with acid pH such as potatoes, coffee or tobacco. It is clear that different seasons will produce plants with a varying composition depending on the atmospheric conditions and therefore the materials derived from them need to be characterised and analysed to determine their possible uses.Given its multidisciplinary approach, this work is being carried out through the collaboration among national (Institute of Materials Science of Madrid (ICMM, CSIC), Institute of Catalysis (ICP, CSIC), Centre of Molecular Biology Severo Ochoa (UAM-CSIC), Polytechnic University of Madrid (UPM), University at distance (UNED), University Complutense of Madrid (UPM) and international (University of Sheffield and University of Ghent) research groups, in addition to various industries interested in the transformation of their residues and or sub-products into “value added materials”, with whom various research projects have been and are being sponsored by the MICINN and CDTI.Peer Reviewe

Las transformaciones de la estructura de la población activa en los núcleos rurales del entorno de Cáceres

El presente artículo se planteó en un primer momento con el objetivo único de analizar las transformaciones generadas por la ciudad y capital de Cáceres sobre su entorno más inmediato. En este sentido, se trataba de continuar una serie de trabajos ya realizados por algunos miembros del Departamento anteriormente y por nosotros mismos, en especial del Dr. Campesino Fernández y del Dr. Barrientos Alfageme . En segundo lugar, se pretendía estudiar, dentro del área de influencia de Cáceres, las interacciones con su entorno más próximo. Comprobar hasta qué punto una ciudad puede organizar el espacio rural que le rodea. Y ver, en definitiva, los factores y causas que determinan toda la serie de transformaciones acaecidas en la última década fundamentalmente por el progreso y mayor grado de interacción. Sin embargo, tras los resultados de las primeras informaciones recogidas, ya se dejaron entrever una serie de profundas transformaciones, que tienen su reflejo más claro en la estructura de la poblaci6n activa y en las modificaciones de este espacio rural. Será en estos aspectos en los que hagamos mayor hincapié, aun sin olvidar otras cuestiones, también de interés, pero que sólo enunciaremos o plantearemos por la brevedad que exigen estos artículos.This article was raised in a first moment with the sole objective of analysing the changes generated by the city and capital of Cáceres on their immediate environment. In this sense, it was a continuation of a series of work already done by some members of the Department previously and for ourselves, in particular Dr. Peasant Fernández and Dr. Barrientos Alfageme . In the second place, it was intended to study, within the area of influence of Cáceres, interactions with their environment. The extent to which a city can organize the rural space that surrounds it. And see, in the final analysis, the causes and factors that determine the entire series of transformations in the last decade, mainly by the progress and greater degree of interaction. However, after the results of the first information collected, already hinted a series of profound transformations, which are reflected in the structure of the active population and changes in this rural area. It will be in these aspects in which we make greater emphasis, even without neglecting other issues, also of interest, but that only enunciaremos or raise by the brevity that require these items

Joint Practice Guidelines for Radionuclide Lymphoscintigraphy for Sentinel Node Localization in Oral/Oropharyngeal Squamous Cell Carcinoma

Involvement of the cervical lymph nodes is the most important prognostic factor for patients with oral/oropharyngeal squamous cell carcinoma (OSCC), and the decision of whether to electively treat patients with clinically negative necks remains a controversial topic. Sentinel node biopsy (SNB) provides a minimally invasive method for determining the disease status of the cervical node basin, without the need for a formal neck dissection. This technique potentially improves the accuracy of histologic nodal staging and avoids overtreating three-quarters of this patient population, minimizing associated morbidity. The technique has been validated for patients with OSCC, and larger-scale studies are in progress to determine its exact role in the management of this patient population. This document is designed to outline the current best practice guidelines for the provision of SNB in patients with early-stage OSCC, and to provide a framework for the currently evolving recommendations for its use. Preparation of this guideline was carried out by a multidisciplinary surgical/nuclear medicine/pathology expert panel under the joint auspices of the European Association of Nuclear Medicine (EANM) Oncology Committee and the Sentinel European Node Trial (SENT) Committee

Joint practice guidelines for radionuclide lymphoscintigraphy for sentinel node localization in oral/oropharyngeal squamous cell carcinoma

Involvement of the cervical lymph nodes is the most important prognostic factor for patients with oral/oropharyngeal squamous cell carcinoma (OSCC), and the decision whether to electively treat patients with clinically negative necks remains a controversial topic. Sentinel node biopsy (SNB) provides a minimally invasive method of determining the disease status of the cervical node basin, without the need for a formal neck dissection. This technique potentially improves the accuracy of histological nodal staging and avoids over-treating three-quarters of this patient population, minimizing associated morbidity. The technique has been validated for patients with OSCC, and larger-scale studies are in progress to determine its exact role in the management of this patient population. This article was designed to outline the current best practice guidelines for the provision of SNB in patients with early-stage OSCC, and to provide a framework for the currently evolving recommendations for its use. These guidelines were prepared by a multidisciplinary surgical/nuclear medicine/pathology expert panel under the joint auspices of the European Association of Nuclear Medicine (EANM) Oncology Committee and the Sentinel European Node Trial Committee