The Acceleration Mechanism of Resistive MHD Jets Launched from Accretion Disks

We analyzed the results of non-linear resistive magnetohydrodynamical (MHD) simulations of jet formation to study the acceleration mechanism of axisymmetric, resistive MHD jets. The initial state is a constant angular momentum, polytropic torus threaded by weak uniform vertical magnetic fields. The time evolution of the torus is simulated by applying the CIP-MOCCT scheme extended for resistive MHD equations. We carried out simulations up to 50 rotation period at the innermost radius of the disk created by accretion from the torus. The acceleration forces and the characteristics of resistive jets were studied by computing forces acting on Lagrangian test particles. Since the angle between the rotation axis of the disk and magnetic field lines is smaller in resistive models than in ideal MHD models, magnetocentrifugal acceleration is smaller. The effective potential along a magnetic field line has maximum around $z \sim 0.5r_0$ in resistive models, where $r_0$ is the radius where the density of the initial torus is maximum. Jets are launched after the disk material is lifted to this height by pressure gradient force. Even in this case, the main acceleration force around the slow magnetosonic point is the magnetocentrifugal force. The power of the resistive MHD jet is comparable to the mechanical energy liberated in the disk by mass accretion. Joule heating is not essential for the formation of jets.Comment: 15 pages, 15 figures, 1 table, accepted for publication in Ap

Extra-large crystal emulsion detectors for future large-scale experiments

Photographic emulsion is a particle tracking device which features the best spatial resolution among particle detectors. For certain applications, for example muon radiography, large-scale detectors are required. Therefore, a huge surface has to be analyzed by means of automated optical microscopes. An improvement of the readout speed is then a crucial point to make these applications possible and the availability of a new type of photographic emulsions featuring crystals of larger size is a way to pursue this program. This would allow a lower magnification for the microscopes, a consequent larger field of view resulting in a faster data analysis. In this framework, we developed new kinds of emulsion detectors with a crystal size of 600-1000 nm, namely 3-5 times larger than conventional ones, allowing a 25 times faster data readout. The new photographic emulsions have shown a sufficient sensitivity and a good signal to noise ratio. The proposed development opens the way to future large-scale applications of the technology, e.g. 3D imaging of glacier bedrocks or future neutrino experiments.Comment: Version accepted for publication in JINS

Dynamics of an Acoustic Polaron in One-Dimensional Electron-Lattice System

The dynamical behavior of an acoustic polaron in typical non-degenerate conjugated polymer, polydiacetylene, is numerically studied by using Su-Schrieffer-Heeger's model for the one dimensional electron-lattice system. It is confirmed that the velocity of a polaron accelerated by a constant electric field shows a saturation to a velocity close to the sound velocity of the system, and that the width of a moving polaron decreases as a monotonic function of the velocity tending to zero at the saturation velocity. The effective mass of a polaron is estimated to be about one hundred times as heavy as the bare electron mass. Furthermore the linear mode analysis in the presence of a polaron is carried out, leading to the conclusion that there is only one localized mode, i.e. the translational mode. This is confirmed also from the phase shift of extended modes. There is no localized mode corresponding to the amplitude mode in the case of the soliton in polyacetylene. Nevertheless the width of a moving polaron shows small oscillations in time. This is found to be related to the lowest odd symmetry extended mode and to be due to the finite size effect.Comment: 12 pages, latex, 9 figures (postscript figures abailble on request to [email protected]) to be published in J. Phys. Soc. Jpn. vol.65 (1996) No.

Development of Nuclear Emulsion Detector for Muon Radiography

AbstractMuon radiography is the non-destructive testing technique of large-scale constructions with cosmic ray muon. Cosmic ray muon has high penetrating power and it always comes from the whole sky. In the same way of taking a X-ray photograph, we can obtain integrated density of constructions which thickness are several tens to several hundreds. We had ever applied this technique to nuclear reactors, volcanos, and so on. Nuclear emulsion is three dimensional track detector with micrometric position accuracy. Thanks to high position resolution, Nuclear emulsion has mrad angular resolution. In addition, the features which require no power supply and can observe in a large area suitable for muon radiography. In Nagoya University, we launched emulsion manufacturing equipment at 2010. It has become possible to flexible development of our detector and succeeded to development of high sensitive nuclear emulsion film (Nagoya emulsion). An important factor is the temperature characteristic to withstand the outdoor observation as a detector to be used in the muon radiography. There is a phenomenon of a latent image fading, whichit is well known in the photographic industry, and this phenomenon is known that temperature and water are involved. So we examined temperature and humidity characteristic of latent image fading about Nagoya emulsion. As a result, we found latent image fading is strongly depends on both temperature and humidity. By dehydrating emulsion film in RH8%, over 95% (Grain Density>40) detection efficiency of muon track keeps over 3months in 25degree, for 2months in 35degree. Additionally it was showed in this test that increasing back ground noise “fog”, which may have occurred by sealing emulsion film in a narrow space, is reduced by buffer space in the bag

Resistive Magnetohydrodynamics of Jet Formation and Magnetically Driven Accretion

We carried out 2.5-dimensional resistive magnetohydrodynamic simulations to study the effects of magnetic diffusivity on magnetically driven mass accretion and jet formation. We found that (1) when the normalized magnetic diffusivity, is small, mass accretion and jet formation take place intermittently; (2) when diffusivity is middle, the system evolves toward a quasi-steady state; and the system evolves toward a quasi-steady state; and (3) when diffusivity is large, the accretion/mass outflow rate decreases with diffusivity and approaches 0. The results of these simulations indicate magnetic braking provide a mass accretion rate which is sufficient to explain the activity of AGNs.Comment: 24 pages, LaTex, 15 jpg figures include, accepted for PAS

Saari's homographic conjecture for planar equal-mass three-body problem in Newton gravity

Saari's homographic conjecture in N-body problem under the Newton gravity is the following; configurational measure \mu=\sqrt{I}U, which is the product of square root of the moment of inertia I=(\sum m_k)^{-1}\sum m_i m_j r_{ij}^2 and the potential function U=\sum m_i m_j/r_{ij}, is constant if and only if the motion is homographic. Where m_k represents mass of body k and r_{ij} represents distance between bodies i and j. We prove this conjecture for planar equal-mass three-body problem. In this work, we use three sets of shape variables. In the first step, we use \zeta=3q_3/(2(q_2-q_1)) where q_k \in \mathbb{C} represents position of body k. Using r_1=r_{23}/r_{12} and r_2=r_{31}/r_{12} in intermediate step, we finally use \mu itself and \rho=I^{3/2}/(r_{12}r_{23}r_{31}). The shape variables \mu and \rho make our proof simple

The anomalous behavior of coefficient of normal restitution in the oblique impact

The coefficient of normal restitution in an oblique impact is theoretically studied. Using a two-dimensional lattice models for an elastic disk and an elastic wall, we demonstrate that the coefficient of normal restitution can exceed one and has a peak against the incident angle in our simulation. Finally, we explain these phenomena based upon the phenomenological theory of elasticity.Comment: 4 pages, 4 figures, to be appeared in PR

Magnetic translation groups in an n-dimensional torus

A charged particle in a uniform magnetic field in a two-dimensional torus has a discrete noncommutative translation symmetry instead of a continuous commutative translation symmetry. We study topology and symmetry of a particle in a magnetic field in a torus of arbitrary dimensions. The magnetic translation group (MTG) is defined as a group of translations that leave the gauge field invariant. We show that the MTG on an n-dimensional torus is isomorphic to a central extension of a cyclic group Z_{nu_1} x ... x Z_{nu_{2l}} x T^m by U(1) with 2l+m=n. We construct and classify irreducible unitary representations of the MTG on a three-torus and apply the representation theory to three examples. We shortly describe a representation theory for a general n-torus. The MTG on an n-torus can be regarded as a generalization of the so-called noncommutative torus.Comment: 29 pages, LaTeX2e, title changed, re-organized, to be published in Journal of Mathematical Physic

Resistive jet simulations extending radially self-similar magnetohydrodynamic models

Numerical simulations with self-similar initial and boundary conditions provide a link between theoretical and numerical investigations of jet dynamics. We perform axisymmetric resistive magnetohydrodynamic (MHD) simulations for a generalised solution of the Blandford & Payne type, and compare them with the corresponding analytical and numerical ideal-MHD solutions. We disentangle the effects of the numerical and physical diffusivity. The latter could occur in outflows above an accretion disk, being transferred from the underlying disk into the disk corona by MHD turbulence (anomalous turbulent diffusivity), or as a result of ambipolar diffusion in partially ionized flows. We conclude that while the classical magnetic Reynolds number $R_{\rm m}$ measures the importance of resistive effects in the induction equation, a new introduced number, \rbeta=(\beta/2)R_{\rm m} with $\beta$ the plasma beta, measures the importance of the resistive effects in the energy equation. Thus, in magnetised jets with $\beta<2$, when \rbeta \la 1 resistive effects are non-negligible and affect mostly the energy equation. The presented simulations indeed show that for a range of magnetic diffusivities corresponding to \rbeta \ga 1 the flow remains close to the ideal-MHD self-similar solution.Comment: Accepted for publication in MNRA

Photogeneration Dynamics of a Soliton Pair in Polyacetylene

Dynamical process of the formation of a soliton pair from a photogenerated electron-hole pair in polyacetylene is studied numerically by adopting the SSH Hamiltonian. A weak local disorder is introduced in order to trigger the formation. Starting from an initial configuration with an electron at the bottom of the conduction band and a hole at the top of the valence band, separated by the Peierls gap, the time dependent Schr${\rm \ddot{o}}$ndinger equation for the electron wave functions and the equation of motion for the lattice displacements are solved numerically. After several uniform oscillations of the lattice system at the early stage, a large distortion corresponding to a pair of a soliton and an anti-soliton develops from a point which is determined by the location and type of the disorder. In some cases, two solitons run in opposite directions, leaving breather like oscillations behind, and in other cases they form a bound state emitting acoustic lattice vibrational modes.Comment: 16 pages 7 figure