556 research outputs found
Recommended from our members
High-Speed Curtain Recoating for Stereolithography
The University of Leuven uses a liquid curtain recoating system for resin deposition in
stereolithography. This system deposits new liquid layers of photo-polymer by means of a liquid
curtain travelling over the build vat. Experiments have been carried out to increase the speed of the
liquid curtain while depositing a layer. Speeds up to 1.2 m/s, and accelerations up to 1 g have been
tested successfully, meaning that it is possible to coat high-quality layers of 75 µm thickness with
this recoating technique. However, the curtain restores too slowly after acceleration. This paper
discusses possible reasons and tries to formulate adequate solutions. Possible solutions consist in
controlling small pressure differences in the curtain’s neighbourhood. A solution to this problem
is necessary, as to make the travelling length of the curtain, and so the machine length acceptable
with respect to the dimensions of the build vat.Mechanical Engineerin
Recommended from our members
Microstructure and Mechanical Properties of Maraging Steel 300 After Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing process for the direct fabrication of
prototypes, tools and functional parts. The process uses a high intensity laser beam to selectively
fuse fine metal powder particles together in a layer-wise manner by scanning cross-sections
generated from a three-dimensional CAD model. The SLM process is capable of producing near
fully dense functional products without almost any geometrical limitation and having mechanical
properties comparable to those produced by conventional manufacturing techniques. There is a
wide range of materials that are suitable to be processed by SLM including various steels, Ti, Al
and CoCr alloys. Being one of these materials, maraging steel 300 (18Ni-300) is an iron-nickel
steel alloy which is often used in applications where high fracture toughness and strength are
required or where dimensional changes have to remain at a minimal level, e.g. aircraft and
aerospace industries for rocket motor castings and landing gear or tooling applications. To
achieve its superior strength and hardness, maraging steel, of which the name is derived from
‘martensite aging’, should be treated with an aging heat treatment. In this study, the effect of the
SLM parameters (scan speed and layer thickness) on the obtained density, surface quality and
hardness of maraging steel 300 parts is investigated. Moreover, various aging heat treatments
(different combinations of duration and maximum temperature) are applied on the SLM parts to
achieve high hardness values. The mechanical testing of maraging steel 300 specimens produced
by SLM and treated with an appropriate aging treatment is accomplished by impact toughness
and tensile tests and compared to the results obtained using conventional production techniques.
Additionally, the microstructures of as-built and heat treated parts are investigated.Mechanical Engineerin
Recommended from our members
Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting
Layer Manufacturing (LM) technologies like Selective Laser Sintering (SLS) were developed
in the late 80’s as techniques for Rapid Prototyping (RP). Today, SLS - as well as its derived
technology Selective Laser Melting (SLM) - is used as well for prototyping, tooling and
manufacturing purposes. This widening of applications is caused mainly by the possibility to
process a large variety of materials, resulting in a broad range of physical and mechanical
properties.
This paper presents a survey of the various binding mechanisms in SLS and SLM, which are
responsible for the broad range of materials and applications. Basic binding mechanisms involve
solid state sintering, chemically induced binding, liquid phase sintering, partial melting and full
melting. Many subcategories can be distinguished based on the type of structural or binder
powder composition: single component powder grains (single material or alloy), composite
powder grains, mixtures of different powder grains, distinct binder material (sacrificial or
permanent), etc. The paper will explain how these binding mechanisms apply for sintering
various types of materials: plastics, metal, ceramics and composites (e.g. glass reinforced
polymers, cermets, hardmetals, etc.). It gives a survey of research done at the University of
Leuven, Belgium, as well as at other European and non-European organizations.Mechanical Engineerin
Recommended from our members
Producing Crack-Free, High Density M2 HSS Parts by Selective Laser Melting: Pre-Heating the Baseplate
Cracks and delamination, resulting from residual stresses are a barrier in the world of Additive
Manufacturing and Selective Laser Melting (SLM) that prohibits the use of many metals in this field. By preheating the baseplate, thermal gradients are lowered and stresses can be reduced. In this work, some initial tests
were performed with M2 Tool Steel. Results show that pre-heating enables the production of dense M2 parts.
The influence of pre-heating on density and mechanical and physical properties is investigated. The paper
shows many promising results for the production of SLM parts in materials that are very sensitive to crack
formation and delamination. When using a pre-heating of 200°C, crack-free parts were produced with a relative
density of 99.8%.Mechanical Engineerin
Recommended from our members
Design Enhancement of Biomedical Scaffolds Made By Selective Laser Melting
Selective laser melting (SLM) is increasingly used to fabricate biomedical scaffolds.
However, the intrinsic specifications of the process such as laser spot size, layer thickness,
and particle size limit the production accuracy, altering the geometrical characteristics and
mechanical properties of the scaffolds. This work attempts to assess and improve the
mechanical properties of TiAl6V4 biomedical scaffolds by eliminating/modifying the sharp
and thin nodes (as the main source of stress concentrations and lowering the mechanical
properties). This is carried out through a gradual increase of the beam (strut) thickness around
the nodes where corresponding struts meet. The compression performance of these scaffolds
was assessed and compared to common examples (unaltered struts) and to scaffolds designed
with thicker struts in the centre of the beams (demonstrating the largest contrast). The findings
prove that the thickening of the nodal points improves the strain distribution while maintains
the mechanical properties at an identical solid volume fraction. This can be used to improve
the scaffold design by a gradual strut thickness (in a comparable volume fraction) for an
improved bio-mechanical performance.Mechanical Engineerin
Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants
The growing interest for Selective Laser Melting (SLM) in orthopedic implant manufacturing is accompanied by
the introduction of novel Ti alloys, in particular β-Ti for their excellent corrosion resistance as well as favorable
combination of high mechanical strength, fatigue resistance and relatively low elastic modulus. As part of the
SLM process for producing quality β-Ti parts powder flowability is essential to achieve uniform thickness of powder
layers. In this work the flowability of different gas atomized β-Ti, including NiTi, powders has been studied. Their
rheological properties were compared to those of commercially available plasma-atomized Ti–6Al–4V powder
using a newly developed semi-automatic experimental set-up. Not only the particle size, shape and size distribution
of the powders display a large influence on the powder flowability but also particle surface properties such as
roughness, chemical composition and the presence of liquid on the surface of the particles. It was found that plasma
or gas atomization production techniques for SLM powder have a considerable effect on the particle topography.
Among the powders studied regarding SLM applicability only rheological properties of the fine size fraction
(25–45 μm) of Ti–45Nb didn't conform to SLM processing requirements. To improve flowability of the Ti–45Nb
powder itwas annealed both in air and argon atmosphere at 600 °C during 1 h, resulting in an improved rheological
behavior suitable for SLM processing
Metal-Insulator Transitions in Degenerate Hubbard Models and AC
Mott-Hubbard metal-insulator transitions in -fold degenerate Hubbard
models are studied within the Gutzwiller approximation. For any rational
filling with (integer) electrons per site it is found that metal-insulator
transition occurs at a critical correlation energy
, where
is the band energy per particle for the uncorrelated Fermi-liquid state and
is a geometric factor which increases linearly with . We
propose that the alkali metal doped fullerides can be described by
a 3-fold degenerate Hubbard model. Using the current estimate of band width and
correlation energy this implies that most of , at integer ,
are Mott-Hubbard insulators and is a strongly correlated
metal.Comment: 10 pages, Revte
Evaluation of transduction efficiency in macrophage colony-stimulating factor differentiated human macrophages using HIV-1 based lentiviral vectors
<p>Abstract</p> <p>Background</p> <p>Monocyte-derived macrophages contribute to atherosclerotic plaque formation. Therefore, manipulating macrophage function could have significant therapeutic value. The objective of this study was to determine transduction efficiency of two HIV-based lentiviral vector configurations as delivery systems for the transduction of primary human blood monocyte-derived macrophages.</p> <p>Results</p> <p>Human blood monocytes were transduced using two VSV-G pseudotyped HIV-1 based lentiviral vectors containing EGFP expression driven by either native HIV-LTR (VRX494) or EF1α promoters (VRX1090). Lentiviral vectors were added to cultured macrophages at different times and multiplicities of infection (MOI). Transduction efficiency was assessed using fluorescence microscopy and flow cytometry. Macrophages transduced between 2 and 120 hours after culturing showed the highest transduction efficiency at 2-hours transduction time. Subsequently, cells were transduced 2 hours after culturing at various vector concentrations (MOIs of 5, 10, 25 and 50) to determine the amount of lentiviral vector particles required to maximally transduce human monocyte-derived macrophages. On day 7, all transduced cultures showed EGFP-positive cells by microscopy. Flow cytometric analysis showed with all MOIs a peak shift corresponding to the presence of EGFP-positive cells. For VRX494, transduction efficiency was maximal at an MOI of 25 to 50 and ranged between 58 and 67%. For VRX1090, transduction efficiency was maximal at an MOI of 10 and ranged between 80 and 90%. Thus, transductions performed with VRX1090 showed a higher number of EGFP-positive cells than VRX494.</p> <p>Conclusions</p> <p>This report shows that VSV-G pseudotyped HIV-based lentiviral vectors can efficiently transduce human blood monocyte-derived macrophages early during differentiation using low particle numbers that do not interfere with differentiation of monocytes into macrophages.</p
Photoluminescent diamond nanoparticles for cell labeling: study of the uptake mechanism in mammalian cells
Diamond nanoparticles (nanodiamonds) have been recently proposed as new
labels for cellular imaging. For small nanodiamonds (size <40 nm) resonant
laser scattering and Raman scattering cross-sections are too small to allow
single nanoparticle observation. Nanodiamonds can however be rendered
photoluminescent with a perfect photostability at room temperature. Such a
remarkable property allows easier single-particle tracking over long
time-scales. In this work we use photoluminescent nanodiamonds of size <50 nm
for intracellular labeling and investigate the mechanism of their uptake by
living cells . By blocking selectively different uptake processes we show that
nanodiamonds enter cells mainly by endocytosis and converging data indicate
that it is clathrin mediated. We also examine nanodiamonds intracellular
localization in endocytic vesicles using immunofluorescence and transmission
electron microscopy. We find a high degree of colocalization between vesicles
and the biggest nanoparticles or aggregates, while the smallest particles
appear free in the cytosol. Our results pave the way for the use of
photoluminescent nanodiamonds in targeted intracellular labeling or biomolecule
deliver
- …