4,341 research outputs found
I-fibrinogen as an oncophilic radiodiagnostic agent: distribution kinetics in tumour-bearing mice.
Fibrinogen radioiodinated by the iodine monochloride method was tested as a tumour radiodiagnostic agent in mice. The I-fibrinogen cleared from the blood of tumour-bearing mice more rapidly than from that of normal mice, but it cleared from the whole body more slowly, suggesting it accumulated in a substantial tumour-related compartment in the abnormal mice. The tumour concentration steadily increased for 4 h after injection, at which time it reached a peak concentration of 11-4% of the injected dose/g. This concentration was higher than the peak concentration for Ga-citrate (not reached until 24 h) or any other oncophilic radiopharmaceutical tested in this tumour model. The early accumulation is consistent with the use of 123I as a tracer label for fibrinogen. A combination of the large tumour concentration of I-fibrinogen, an increased catabolic rate induced by chemical modification, and the exceptional nuclear properties of 123I for scintigraphic imaging, could lead to a very useful radiodiagnostic procedure for cancer
A practical high current 11 MeV production of high specific activity 89Zr
Introduction
Zr-89 is a useful radionuclide for radiolabeling proteins and other molecules.1,2 There are many reports of cyclotron production of 89Zr by the 89Y (p,n) reaction. Most irradiations use thin metal backed deposits of Y and irradiation currents up to 100 ”A or thicker amounts of Y or Y2O3 with
~ 20 ”A irradiations.3,4 We are working to develop high specific activity 89Zr using a low energy 11 MeV cyclotron. We have found that target Y metal contains carrier Zr and higher specific activities are achieved with less Y. The goal of this work was to optimize yield while minimizing the amount of Y that was irradiated.
Material and Methods
All irradiations were done using a Siemens Eclipse 11 MeV proton cyclotron. Y foils were used for the experiments described here. Y2O3 was tried and abandoned due to lower yield and poor heat transfer. Yttrium metal foils from Alfa Aesar, ESPI Metals and Sigma Aldrich, 0.1 to
1 mm in thickness, were tested. Each foil was irradiated for 10 to 15 minutes.
The targets to hold the Y foils were made of aluminum and were designed to fit within the âpaper burnâ unit of the Siemenâs Eclipse target station, allowing the Y target body to be easily inserted and removed from the system. Several Al targets of 2 cm diam. and 7.6 cm long were tested with the face of the targets from 11, 26 or 90o relative to the beam to vary watts cmâ2 on the foil. The front of the foils was cooled by He convection and the foil backs by conduction to the Al target body. The target body was cooled by conduction to the water cooled Al sleeve of the target holder.
Results and Conclusion
The best target was two stacked, 0.25 mm thick, foils to stop beam. 92% of the 89Zr activity was in the front 0.25 mm Y foil. With the greatest slant we could irradiate up to 30 ”A of beam on tar-get. However, the 13Ă30 mm dimensions of the foil was more mass (0.41 g) and lower specific activity than was desired. Redesign of the target gave a target 90o to the beam with 12Ă12 mm foils (0.15 g/foil) that were undamaged with up to 30 ”A irradiation when two foils were used. This design has a reduction in beam at the edges of ~10%. With this design, a single Y foil, 0.25 mm thick sustained over 31 ”A of beam and a peak power on target of 270 watts cmâ2. The product was radionuclidically pure 89Zr after all 89mZr and small amounts of 13N produced from oxygen at the surface had decayed (TABLE 1).
Our conclusion is that the optimum target is a single 0.25 mm thick Y foil to obtain the greatest specific activity at this proton energy. This produces 167 MBq of 89Zr at EOB with a 15 minute and 31 ”A irradiation. We are continuing to redesign the clamp design to reduce losses at the edge of the beam
Formation of Ejecta and Dust Pond Deposits on Asteroid Vesta
Dust and melt ponds have been studied on planetary bodies including Eros, Itokawa, and the Moon. However, depending on the nature of the regolith material properties and the location of the planetary body, the formation mechanism of the ponded features varies. On Eros and Itokawa, ponded features are formed from dry regolith materials whereas on the Moon similar features are thought to be produced by ejecta melt. On the surface of Vesta, we have identified type 1, ejecta ponds, and type 2, dust ponds. On Vesta type 1 pond are located in the vicinity of ejecta melt of large impact craters. The material is uniformly distributed across the crater floor producing smooth pond surfaces which have a constant slope and shallow depth. The hosting crater of melt-like ponds has a low raised rim and is located on relatively low elevated regions. Whereas, the type 2 ponds on Vesta reveal an undulating surface that is frequently displaced from the crater center or extends toward the crater wall with an abruptly changing slope. We suggested that for the production of the type 2 ponds, localized seismic diffusion and volatile-induced fluidization may be responsible for Vesta. Due to Vesta's large size (in comparison to Eros and Itokawa), the surface may have experienced local-scale rare high-amplitude seismic diffusion which was sufficient to drift fine material. Similarly, short-lived volatile activities were capable to transfer dusty material on to the surface. Segregation and smoothing of transferred material lack further surface activities, hindering the formation of smooth morphology
Evaluating patient engagement with a digital intervention for adolescent and young adult (AYA) stem cell transplant survivors
https://openworks.mdanderson.org/sumexp22/1109/thumbnail.jp
Pair production of the T-odd leptons at the LHC
The T-odd leptons predicted by the littlest model with T-parity can
be pair produced via the subprocesses ,
, and (= or
) at the Large Hadron Collider . We estimate the hadronic
production cross sections for all of these processes and give a simply
phenomenology analysis. We find that the cross sections for most of the above
processes are very small. However, the value of the cross section for the
process can reach .Comment: 12 pages, 2 figure
The Word Problem for Omega-Terms over the Trotter-Weil Hierarchy
For two given -terms and , the word problem for
-terms over a variety asks whether
in all monoids in . We show that the
word problem for -terms over each level of the Trotter-Weil Hierarchy
is decidable. More precisely, for every fixed variety in the Trotter-Weil
Hierarchy, our approach yields an algorithm in nondeterministic logarithmic
space (NL). In addition, we provide deterministic polynomial time algorithms
which are more efficient than straightforward translations of the
NL-algorithms. As an application of our results, we show that separability by
the so-called corners of the Trotter-Weil Hierarchy is witnessed by
-terms (this property is also known as -reducibility). In
particular, the separation problem for the corners of the Trotter-Weil
Hierarchy is decidable
Recommended from our members
Rhythm in the speech of a person with right hemisphere damage: Applying the pairwise variability index
Although several aspects of prosody have been studied in speakers with right hemisphere damage (RHD), rhythm remains largely uninvestigated. This study compares the rhythm of an Australian English speaker with right hemisphere damage (due to a stroke, but with no concomitant dysarthria) to that of a neurologically unimpaired individual. The speakers' rhythm is compared using the pairwise variability index (PVI) which allows for an acoustic characterization of rhythm by comparing the duration of successive vocalic and intervocalic intervals. A sample of speech from a structured interview between a speech and language therapist and each participant was analysed. Previous research has shown that speakers with RHD may have difficulties with intonation production, and therefore it was hypothesized that there may also be rhythmic disturbance. Results show that the neurologically normal control uses a similar rhythm to that reported for British English (there are no previous studies available for Australian English), whilst the speaker with RHD produces speech with a less strongly stress-timed rhythm. This finding was statistically significant for the intervocalic intervals measured (t(8) = 4.7, p < .01), and suggests that some aspects of prosody may be right lateralized for this speaker. The findings are discussed in relation to previous findings of dysprosody in RHD populations, and in relation to syllable-timed speech of people with other neurological conditions
Diboson-Jets and the Search for Resonant Zh Production
New particles at the TeV-scale may have sizeable decay rates into boosted
Higgs bosons or other heavy scalars. Here, we investigate the possibility of
identifying such processes when the Higgs/scalar subsequently decays into a
pair of W bosons, constituting a highly distinctive "diboson-jet." These can
appear as a simple dilepton (plus MET) configuration, as a two-prong jet with
an embedded lepton, or as a four-prong jet. We study jet substructure methods
to discriminate these objects from their dominant backgrounds. We then
demonstrate the use of these techniques in the search for a heavy spin-one Z'
boson, such as may arise from strong dynamics or an extended gauge sector,
utilizing the decay chain Z' -> Zh -> Z(WW^(*)). We find that modes with
multiple boosted hadronic Zs and Ws tend to offer the best prospects for the
highest accessible masses. For 100/fb luminosity at the 14 TeV LHC, Z' decays
into a standard 125 GeV Higgs can be observed with 5-sigma significance for
masses of 1.5-2.5 TeV for a range of models. For a 200 GeV Higgs (requiring
nonstandard couplings, such as fermiophobic), the reach may improve to up to
2.5-3.0 TeV.Comment: 23 pages plus appendices, 9 figure
Testbeam and Laboratory Characterization of CMS 3D Pixel Sensors
The pixel detector is the innermost tracking device in CMS, reconstructing
interaction vertices and charged particle trajectories. The sensors located in
the innermost layers of the pixel detector must be upgraded for the ten-fold
increase in luminosity expected with the High- Luminosity LHC (HL-LHC) phase.
As a possible replacement for planar sensors, 3D silicon technology is under
consideration due to its good performance after high radiation fluence. In this
paper, we report on pre- and post- irradiation measurements for CMS 3D pixel
sensors with different electrode configurations. The effects of irradiation on
electrical properties, charge collection efficiency, and position resolution of
3D sensors are discussed. Measurements of various test structures for
monitoring the fabrication process and studying the bulk and surface
properties, such as MOS capacitors, planar and gate-controlled diodes are also
presented.Comment: 14 page
- âŠ