826 research outputs found
Diagnosis of a Poorly Performing Liquid Hydrogen Bulk Storage Sphere
There are two 850,000 gallon Liquid Hydrogen (LH2) storage spheres used to support the Space Shuttle Program; one residing at Launch Pad A and the other at Launch Pad B. The LH2 Sphere at Pad B has had a high boiloff rate since being brought into service in the 1960's. The daily commodity loss was estimated to be approximately double that of the Pad A sphere, and well above the minimum required by the sphere's specification. Additionally, after being re-painted in the late 1990's a "cold spot" appeared on the outer sphere which resulted in a poor paint bond, and mold formation. Thermography was used to characterize the area, and the boiloff rate was continually evaluated. All evidence suggested that the high boiloff rate was caused by an excessive heat leak into the inner sphere due to an insulation void in the annulus. Pad B was recently taken out of Space Shuttle program service which provided a unique opportunity to diagnose the sphere's poor performance. The sphere was drained and inerted, and then opened from the annular relief device on the top where a series of boroscoping operations were accomplished. Boroscoping revealed a large Perlite insulation void in the region of the sphere where the cold spot was apparent. Perlite was then trucked in and off-loaded into the annular void region until the annulus was full. The sphere has not yet been brought back into service
On the local unitary equivalence of states of multi-partite systems
Two pure states of a multi-partite system are alway are related by a unitary
transformation acting on the Hilbert space of the whole system. This
transformation involves multi-partite transformations. On the other hand some
quantum information protocols such as the quantum teleportation and quantum
dense coding are based on equivalence of some classes of states of bi-partite
systems under the action of local (one-particle) unitary operations. In this
paper we address the question: ``Under what conditions are the two states
states, and , of a multi-partite system locally unitary
equivalent?'' We present a set of conditions which have to be satisfied in
order that the two states are locally unitary equivalent. In addition, we study
whether it is possible to prepare a state of a multi-qudit system. which is
divided into two parts A and B, by unitary operations acting only on the
systems A and B, separately.Comment: 6 revtex pages, 1 figur
Quantum Zeno tomography
We show that the resolution "per absorbed particle" of standard absorption
tomography can be outperformed by a simple interferometric setup, provided that
the different levels of "gray" in the sample are not uniformly distributed. The
technique hinges upon the quantum Zeno effect and has been tested in numerical
simulations. The scheme we propose could be implemented in experiments with
UV-light, neutrons or X-rays.Comment: 8 pages, 5 figure
How many photons are needed to distinguish two transparencies?
We give a bound on the minimum number of photons that must be absorbed by any
quantum protocol to distinguish between two transparencies. We show how a
quantum Zeno method in which the angle of rotation is varied at each iteration
can attain this bound in certain situations.Comment: 5 pages, 4 figure
Return to Service of a Liquid Hydrogen Storage Sphere
One, of two, 850,000 gallon liquid hydrogen storage spheres, at NASA's Kennedy Space Center, was decommissioned in 2010. This tank had an abnormally high heat leak that was investigated and determined to be the result of a large void in the perlite insulation. The insulation void was subsequently filled, and the tank was refurbished for its planned use in the Space Launch Systems (SLS) program. Return to service of this tank began in December of 2017 with a partial liquid hydrogen fill. Since that time, routine measurement of the liquid level have been recorded in order to establish a new boiloff rate and associated heat leak. This data shows the perlite top off activities have resulted in a much reduced, and within design specification, heat leak
Return to Service of a Liquid Hydrogen Storage Sphere
One, of two, 850,000 gallon liquid hydrogen storage spheres, at NASA's Kennedy Space Center, was decommissioned in 2010. This tank had an abnormally high heat leak that was investigated and determined to be the result of a large void in the perlite insulation. The insulation void was subsequently filled, and the tank was refurbished for its planned use in the Space Launch Systems (SLS) program. Return to service of this tank began in December of 2017 with a partial liquid hydrogen fill. Since that time, routine measurement of the liquid level have been recorded in order to establish a new boiloff rate and associated heat leak. This data shows the perlite top off activities have resulted in a much reduced, and within design specification, heat leak
Minimal Absorption Measurements
We show that it is not possible to discriminate two close transparencies
without a certain number of photons being absorbed. We extend this to the
discrimination of patterns of transparency (images).Comment: 11 pages (latex
Annular Air Leaks in a Liquid Hydrogen Storage Tank
Large liquid hydrogen (LH2) storage tanks are vital infrastructure for NASA, the DOD, and industrial users. Over time, air may leak into the evacuated, perlite filled annular region of these tanks. Once inside, the extremely low temperatures will cause most of the air to freeze. If a significant mass of air is allowed to accumulate, severe damage can result from nominal draining operations. Collection of liquid air on the outer shell may chill it below its ductility range, resulting in fracture. Testing and analysis to quantify the thermal conductivity of perlite that has nitrogen frozen into its interstitial spaces and to determine the void fraction of frozen nitrogen within a perlite-frozen nitrogen mixture is presented. General equations to evaluate methods for removing frozen air, while avoiding fracture, are developed. A hypothetical leak is imposed on an existing tank and a full analysis of that leak is detailed. This analysis includes a thermal model of the tank and a time-to-failure calculation. Approaches to safely remove the frozen air are analyzed, leading to the conclusion that the optimal approach is to allow the frozen air to melt and use a water stream to prevent the outer shell from chilling
Beyond generative models: superfast traversal, optimization, novelty, exploration and discovery (STONED) algorithm for molecules using SELFIES
Inverse design allows the generation of molecules with desirable physical quantities using property optimization. Deep generative models have recently been applied to tackle inverse design, as they possess the ability to optimize molecular properties directly through structure modification using gradients. While the ability to carry out direct property optimizations is promising, the use of generative deep learning models to solve practical problems requires large amounts of data and is very time-consuming. In this work, we propose STONED - a simple and efficient algorithm to perform interpolation and exploration in the chemical space, comparable to deep generative models. STONED bypasses the need for large amounts of data and training times by using string modifications in the SELFIES molecular representation. First, we achieve non-trivial performance on typical benchmarks for generative models without any training. Additionally, we demonstrate applications in high-throughput virtual screening for the design of drugs, photovoltaics, and the construction of chemical paths, allowing for both property and structure-based interpolation in the chemical space. Overall, we anticipate our results to be a stepping stone for developing more sophisticated inverse design models and benchmarking tools, ultimately helping generative models achieve wider adoption
- …