Design study for the support of an inertial guidance test facility on gas lubricated compliant surface spherical bearings

Design study for support of inertial guidance test facility on gas lubricated compliant surface spherical bearing

Properties of a radiation-induced charge multiplication region in epitaxial silicon diodes

Charge multiplication (CM) in p$^+$n epitaxial silicon pad diodes of 75, 100 and 150 \upmum thickness at high voltages after proton irradiation with 1 MeV neutron equivalent fluences in the order of $10^{16}$ cm$^{-2}$ was studied as an option to overcome the strong trapping of charge carriers in the innermost tracking region of future Super-LHC detectors. Charge collection efficiency (CCE) measurements using the Transient Current Technique (TCT) with radiation of different penetration (670, 830, 1060 nm laser light and $\alpha$-particles with optional absorbers) were used to locate the CM region close to the p$^+$-implantation. The dependence of CM on material, thickness of the epitaxial layer, annealing and temperature was studied. The collected charge in the CM regime was found to be proportional to the deposited charge, uniform over the diode area and stable over a period of several days. Randomly occurring micro discharges at high voltages turned out to be the largest challenge for operation of the diodes in the CM regime. Although at high voltages an increase of the TCT baseline noise was observed, the signal-to-noise ratio was found to improve due to CM for laser light. Possible effects on the charge spectra measured with laser light due to statistical fluctuations in the CM process were not observed. In contrast, the relative width of the spectra increased in the case of $\alpha$-particles, probably due to varying charge deposited in the CM region.Comment: 11 pages, accepted by NIM

Fine-tuning the functional properties of carbon nanotubes via the interconversion of encapsulated molecules

Tweaking the properties of carbon nanotubes is a prerequisite for their practical applications. Here we demonstrate fine-tuning the electronic properties of single-wall carbon nanotubes via filling with ferrocene molecules. The evolution of the bonding and charge transfer within the tube is demonstrated via chemical reaction of the ferrocene filler ending up as secondary inner tube. The charge transfer nature is interpreted well within density functional theory. This work gives the first direct observation of a fine-tuned continuous amphoteric doping of single-wall carbon nanotubes

Slovenian Grassland Society: Science, Profession and Practice

The Slovenian Grassland Society (SGS) was established in 1993. It has around 120 members. A half of members are active farmers, around 10% are scientists, the rest are employed in extension services or other agricultural enterprises (seed companies, administration bodies, etc.

Linear plasmon dispersion in single-wall carbon nanotubes and the collective excitation spectrum of graphene

We have measured a strictly linear pi-plasmon dispersion along the axis of individualized single wall carbon nanotubes, which is completely different from plasmon dispersions of graphite or bundled single wall carbon nanotubes. Comparative ab initio studies on graphene based systems allow us to reproduce the different dispersions. This suggests that individualized nanotubes provide viable experimental access to collective electronic excitations of graphene, and it validates the use of graphene to understand electronic excitations of carbon nanotubes. In particular, the calculations reveal that local field effects (LFE) cause a mixing of electronic transitions, including the 'Dirac cone', resulting in the observed linear dispersion

Gain and time resolution of 45 μ\mum thin Low Gain Avalanche Detectors before and after irradiation up to a fluence of 101510^{15} neq_{eq}/cm2^2

Low Gain Avalanche Detectors (LGADs) are silicon sensors with a built-in charge multiplication layer providing a gain of typically 10 to 50. Due to the combination of high signal-to-noise ratio and short rise time, thin LGADs provide good time resolutions. LGADs with an active thickness of about 45 $\mu$m were produced at CNM Barcelona. Their gains and time resolutions were studied in beam tests for two different multiplication layer implantation doses, as well as before and after irradiation with neutrons up to $10^{15}$ n$_{eq}$/cm$^2$. The gain showed the expected decrease at a fixed voltage for a lower initial implantation dose, as well as for a higher fluence due to effective acceptor removal in the multiplication layer. Time resolutions below 30 ps were obtained at the highest applied voltages for both implantation doses before irradiation. Also after an intermediate fluence of $3\times10^{14}$ n$_{eq}$/cm$^2$, similar values were measured since a higher applicable reverse bias voltage could recover most of the pre-irradiation gain. At $10^{15}$ n$_{eq}$/cm$^2$, the time resolution at the maximum applicable voltage of 620 V during the beam test was measured to be 57 ps since the voltage stability was not good enough to compensate for the gain layer loss. The time resolutions were found to follow approximately a universal function of gain for all implantation doses and fluences.Comment: 17 page