Family house with a hairdresser in Vyškov

Bakalářská práce ,,Rodinný dům s kadeřnictvím ve Vyškově" je zpracována ve formě projektové dokumentace. Objekt je částečně podsklepen, má dvě nadzemní podlaží a podkroví, zastřešen sedlovou střechou. Dům je navržen na parcele č. 242/1 Dolní ulici ve Vyškově.Bachelor´s thesis ,,FAMILY HOUSE WITH A HAIRDRESSER IN VYŠKOV" is processed in the from of project documentation. The building is a partially basement, it has two floors and an attic, roofed - in sellar rooftop. The house is designed to plot No. 242/1 in Vyškov Dolní street.

Wellness centre in Slavkov u Brna

Diplomová práce ,,WELLNESS centrum ve Slavkově u Brna" je zpracována ve formě projektové dokumentace. Objekt je částečně podsklepen, má tři nadzemní podlaží, zastřešen -sedlovou střechou a částečně pultovou střechou. Dům je navržen na parcele č. 1787/1, 1787/30 Slovanské ulici ve Slavkově u Brna. Zastavěná plocha činí 554,7 m2. Suterén, přízemí a druhé patro náleží pro wellness a penzion. Třetí patro slouží pro bydlení majitele. Objekt je založen na základových pasech z prostého betonu s přetáhnutím základové desky přes základy s výztužnou karisítí. Zdící systém a stropy jsou od firmy Porotherm, příčky ze systému Knauf. Stavba je napojena na místní komunikaci a na dostupné inženýrské sítě.Master´s thesis ,,WELLNESS centre in Slavkov u Brna" is processed in the from of project documentation. The building is a partially basement, it has three floors and an attic, roofed in sellar rooftop and partially counter rooftop. The house is designed to plot No. 1787/1, 1787/30 in Slavkov u Brna Slovanská street. Built up area is 554,7 square meters. The basement, ground floor and second floor belongs to a wellness and a guesthouse. The third floor is used for housing owners. The building is based on the footings of plain concrete foundation slab drag over the basics with reinforcing karisítí . Walling system and ceilings from Porotherm , partitions from the system Knauf. The building is connected to the local road and the available utilities.

Podatność elektromagnetyczna kamery IP

Electromagnetic susceptibility is an important ability of all electronic and electric devices which are located in the area with electromagnetic interference. The paper is focused on IP camera and it describes its levels of electromagnetic susceptibility against electromagnetic interference. The measurement must be performed according to standard EN 50130-4 ed. 2. © 2016, Wydawnictwo SIGMA - N O T Sp. z o.o. All rights reserved

Conditions for testing electromagnetic susceptibility of electronic devices

Electromagnetic compatibility is scientific and technological discipline which examines the compatibility conditions of operation the various systems and methods of leading to their optimization. Respect for the principles of electromagnetic compatibility closely related to the quality and reliability of products. Underestimation of these principles in the development, construction, design and testing of products and systems containing electronic circuitry have resulted in a large failure rate of products, their operational unreliability and consequently the inability to sell the product on the market. Moreover, lack of knowledge of the principles and conditions of electromagnetic compatibility may result in failure or irreparable damage to the devices or endanger the property, health or life of people in certain circumstances. © Research India Publications

Dataset of response of a semi anechoic room Frankonia SAC 3 plus driven by the electric field

This document provides real data obtained inside the semi anechoic room Frankonia SAC 3 plus that is certified for measurement of electromagnetic interferences and performing of electromagnetic susceptibility tests in the range from 30 MHz up to 18 GHz. The hereby presented data describe the response of the semi anechoic room to the electric field driven inside. The frequency range of the experiment was from 10 MHz to 80 MHz where the standing waves are most likely to occur. © 2018 The AuthorsMSMT-7778/2014, MŠMT, Ministerstvo Školství, Mládeže a Tělovýchovy; LO1303, MŠMT, Ministerstvo Školství, Mládeže a Tělovýchovy; CZ.1.05/2.1.00/03.0089, FEDER, European Regional Development FundMinistry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme [LO1303 (MSMT-7778/2014)]; European Regional Development Fund under the project CEBIA [CZ.1.05/2.1.00/03.0089

Immunity test of electronic device for electrostatic discharge

Due to the increasing susceptibility of electronic device, the importance of electromagnetic immunity to interference also increasing. The basic task of testing the electromagnetic susceptibility of electronic device on the harmful interference is comparison of the data obtained by testing with data which are required by the relevant standards for the device. When the electronic device does not have a sufficient immunity can occur a deterioration of its functionality, temporary failure or even a permanent damage to the device. The aim of this paper is perform the test of electromagnetic susceptibility for the electrostatic discharge at the keyboard of the alarm system. Immunity test will be performed according to instructions in the standards of electromagnetic compatibility.LO1303, Ministry of Educatio

Możliwości zatrzymania ruchu pojazdu za pomocą impulsów elektromagnetycznych

Operation of electrical and electronic systems can be disturbed by the influence of natural or artificially generated electromagnetic pulses (EMP). In this connection for many years people successfully developed means for generating the power EMP also in the form of weapon systems. Potential targets can be the important elements of critical infrastructure, military systems or transport vehicles, for example if necessary stopping the moving vehicle, as well as vehicles, which penetrated to vicinity of the protected object or stopping of vehicles at control posts. © 2015, Wydawnictwo SIGMA - N O T Sp. z o.o. All rights reserved

Impact of security cameras on electromagnetic environment in far and near-field

Electromagnetic interference constitutes a serious problem for the design and operation of electronic and electrical security devices or systems because the impairment of the device function gives rise security complications. The complications may be associated with false alarms, errors in control of connected devices, image defects, losses of communication. The main purpose of the experiment reported here was to analyze and compare the level of the electromagnetic interference in a near and far field. In addition, the article also provides an interesting comparison of the results obtained by measuring in the Gigahertz Transverse Electromagnetic cell and semi-anechoic chamber. © 2016 IEEE

Sterowanie bezszczotkowym silniem DC z wykorzystaniem [latformy Arduno

The Brushless DC (BLDC) motors are often used in many situations in many sectors. These motors are widely used in the application of the Unmanned Aerial Vehicles (AUV). However, BLDC motors need to be controlled by the external system to ensure flawless and reliable function. Using the Electronic speed control (ESC) for the brushless motor, every motor can be controlled by any platforms such as Arduino. The Arduino platform was selected due to its simplicity, availability at the market and the cost-effectiveness. The aim of this research is designing the motor control for the BLDC motor on the Arduino platform. The designed system should be used by the UAV using propellers. This paper also includes the software implementation for the motor control. An implementation is developed to study the performance of the system for wide range speed control and power quality improvement. © 2018, Wydawnictwo SIGMA-NOT. All rights reserved.W artykule opisano zdalne sterowanie bezszczotkowym silniekiem DC w zastosowanou do dronów. Wykorzystano platformę Arduno i system ESC – electronik speed control.Przedstawiono oprogramowanie I badania przy różnych warunkach pracy.Ministry of Education, Youth and Sports of the Czech Republic within the National Sustainability Programme [LO1303 (MSMT-7778/2014)]; European Regional Development Fund under the project CEBIA-Tech [CZ.1.05/2.1.00/03.0089]; Internal Grant Agency of Tomas Bata University [IGA/CebiaTech/2018/004

Electromagnetic compatibility of arduino development platform in near and far-field

The electromagnetic compatibility is a very popular scientific discipline that widely affects the electronic devices. The electromagnetic radiation can be associated with many distortion and errors in the microcontrollers. The main purpose of this article is to examine the EMC of a cheap development kit, namely Arduino. In addition, the article provides the comparison of the results in terms of electromagnetic susceptibility and interference. © 2017, Research India Publications. All rights reserved.CZ.1.05/2.1.00/03.0089, ERDF, European Regional Development Fund; MSMT-7778/2014, MŠMT, Ministerstvo Školství, Mládeže a Tělovýchov