61 research outputs found
Output tracking via sliding modes in causal systems with time delay modeled by higher order pade approximations
Output tracking in a SISO causal uncertain nonlinear system with an output subject to a time delay is considered using sliding mode control. A higher order Pade approximation to a delay function with a known time delay is used to construct a model of a transformed system without a time delayed output and is employed in a feedback sliding mode control. This model functions as a predictor of the plant states and the plant output, but is of nonminimum phase due to the application of the Pade approximation. The method of the stable system center is used to stabilize the internal dynamics of this plant model, and a control is developed using a sliding surface to allow the plant to track an arbitrary reference profile given by an exogenous system with a known characteristic equation. Simulations of the system are performed for the plant model using a first, second and third order Pade approximations and a controller in plant feedback mode. Numerical examples for Pade approximations of increasing order are considered and compare
Recommended from our members
Glass-forming ability, phase formation and mechanical properties of glass-forming Cu-Hf-Zr alloys
The influence of Hf additions on the glass-forming ability (GFA), phase formation and mechanical properties of Cu50HfxZr50-x (x = 2,5,10,20 at.%) alloys has been systematically investigated. We report on a distinct correlation between phase formation and GFA of Cu50Zr50-based alloys. Increasing additions of Hf reduce the thermal stability of the high-temperature B2 Cu(Hf,Zr) phase, while the thermal stability of the corresponding undercooled melt is enhanced. The GFA of these alloy series gradually raises up to 10 at.% Hf, whereas at 20 at.%Hf, the GFA is drastically lowered, since the B2 Cu(Hf,Zr) phase becomes unstable and the precipitation of the low-temperature equilibrium phases is favoured. This interrelation determines the microstructure and results in the formation of Cu-Hf-Zr-based bulk metallic glass composites. These composites not only show appreciable macroscopic plastic strain, but also high yield strength
Phase formation of a biocompatible Ti-based alloy under kinetic constraints studied via in-situ high-energy X-ray diffraction
The biocompatible Ti40Cu34Pd14Zr10Sn2 bulk metallic glass was rapidly heated, also known as flash-annealed, at varying heating rates up to 1579 K/s. Thereby, the phase formation was characterized via advanced in-situ high-energy X-ray diffraction. It has been found that the evolving kinetic constraints can be used as a tool to deliberately alter the crystalline phase formation. This novel processing route permits to select phases to crystallize to a predefined fraction and, thus, to potentially design the microstructure of materials according to a specified property-profile. Consequently, flash-annealing poses a unique synthesis route to design materials with, for instance, good biomechanical compatibility
A Novel Hybrid Scheme Using Genetic Algorithms and Deep Learning for the Reconstruction of Portuguese Tile Panels
This paper presents a novel scheme, based on a unique combination of genetic
algorithms (GAs) and deep learning (DL), for the automatic reconstruction of
Portuguese tile panels, a challenging real-world variant of the jigsaw puzzle
problem (JPP) with important national heritage implications. Specifically, we
introduce an enhanced GA-based puzzle solver, whose integration with a novel
DL-based compatibility measure (DLCM) yields state-of-the-art performance,
regarding the above application. Current compatibility measures consider
typically (the chromatic information of) edge pixels (between adjacent tiles),
and help achieve high accuracy for the synthetic JPP variant. However, such
measures exhibit rather poor performance when applied to the Portuguese tile
panels, which are susceptible to various real-world effects, e.g.,
monochromatic panels, non-squared tiles, edge degradation, etc. To overcome
such difficulties, we have developed a novel DLCM to extract high-level
texture/color statistics from the entire tile information.
Integrating this measure with our enhanced GA-based puzzle solver, we have
demonstrated, for the first time, how to deal most effectively with large-scale
real-world problems, such as the Portuguese tile problem. Specifically, we have
achieved 82% accuracy for the reconstruction of Portuguese tile panels with
unknown piece rotation and puzzle dimension (compared to merely 3.5% average
accuracy achieved by the best method known for solving this problem variant).
The proposed method outperforms even human experts in several cases, correcting
their mistakes in the manual tile assembly
Quick Ultra-VIolet Kilonova surveyor (QUVIK)
We present a near-UV space telescope on a ~70kg micro-satellite with a
moderately fast repointing capability and a near real-time alert communication
system that has been proposed in response to a call for an ambitious Czech
national mission. The mission, which has recently been approved for Phase 0, A,
and B1 study shall measure the brightness evolution of kilonovae, resulting
from mergers of neutron stars in the near-UV band and thus it shall distinguish
between different explosion scenarios. Between the observations of transient
sources, the satellite shall perform observations of other targets of interest,
a large part of which will be chosen in open competition.Comment: SPIE Astronomical Telescopes and Instrumentatio
Building the Games Students Want to Play: BiblioBouts Project Interim Report #3
The University of Michigan's School of Information and its partner, the Center for
History and New Media at George Mason University, are undertaking the 3-year
BiblioBouts Project (October 1, 2008 to September 30, 2011) to support the design,
development, testing, and evaluation of the web-based BiblioBouts game to teach
incoming undergraduate students information literacy skills and concepts. This third
interim report describes the BiblioBouts Project team’s 6-month progress achieving the project's 4 objectives: designing, developing, deploying, and evaluating the BiblioBouts game and recommending best practices for future information literacy games. This latest 6-month period was marked by extensive progress in the deployment and evaluation of the alpha version of BiblioBouts. Major tasks that will occupy the team for the next 6 months are applying evaluation findings to game redesign and enhancement. For general information about game design, pedagogical goals, scoring, game play, project participants, and playing BiblioBouts in your course, consult the BiblioBouts Project web site.Institute of Museum and Library Serviceshttp://deepblue.lib.umich.edu/bitstream/2027.42/69157/1/bbInterimReportToIMLS03.pd
Geographic Visualization in Archaeology
Archaeologists are often considered frontrunners in employing spatial approaches within the social sciences and humanities, including geospatial technologies such as geographic information systems (GIS) that are now routinely used in archaeology. Since the late 1980s, GIS has mainly been used to support data collection and management as well as spatial analysis and modeling. While fruitful, these efforts have arguably neglected the potential contribution of advanced visualization methods to the generation of broader archaeological knowledge. This paper reviews the use of GIS in archaeology from a geographic visualization (geovisual) perspective and examines how these methods can broaden the scope of archaeological research in an era of more user-friendly cyber-infrastructures. Like most computational databases, GIS do not easily support temporal data. This limitation is particularly problematic in archaeology because processes and events are best understood in space and time. To deal with such shortcomings in existing tools, archaeologists often end up having to reduce the diversity and complexity of archaeological phenomena. Recent developments in geographic visualization begin to address some of these issues, and are pertinent in the globalized world as archaeologists amass vast new bodies of geo-referenced information and work towards integrating them with traditional archaeological data. Greater effort in developing geovisualization and geovisual analytics appropriate for archaeological data can create opportunities to visualize, navigate and assess different sources of information within the larger archaeological community, thus enhancing possibilities for collaborative research and new forms of critical inquiry
Recommended from our members
Radiation Effects on the Oxidation Rate and on Other Chemical Properties of Graphite
Irradiation by fast particles changes most physical and chemical properties of graphite by producing various lattice defects such as displaced atoms, vacancies, dislocations, etc. Attempts have been made to evaluate the contributions of different types of defects to the property changes. Such evaluations have proven rather successful for physical properties and will be extended to several chemical properties. Experiments are described which show that oxidation catalysts and inhibitors act differently on irradiated and on unirradiated crystals. The oxidation of graphite crystals in ozone was studied because it appears to provide clues to the enhancement of oxidation rates in the presence of ionizing radiation. The kinetics and mode of attack of -ozone on graphite crystals with or without prior neutron irradiation are described. (auth
- …