174 research outputs found
Can geopolymer materials be optimized for sustainable building envelope applications? A preliminary development and characterization study
SEM study of debonding /pull-out features & FTIR analysis of bonding in fly ash- epoxy particulate composites
This research utilises as received coal power fly ash (FA) as a value-added component added to epoxy resin for
making a superior matrix for fibre reinforced composites in load-bearing applications. The epoxy resin used in
this project was DGEBA cured by cycloaliphatic polyamine at 120 Co for 2 hours. A fly ash with particle size
ranging between 2 – 20 micron was added to the epoxy in 0, 10, 20, 30, 40 & 50 wt% proportions. Scanning
Electron Microscopy (SEM) of tensile fracture surfaces of the composites using ASTM D638 tensile samples
provide significant evidence of Fly Ash debonding and pull-out from the epoxy matrix indicating good
mechanical bonding between FA and epoxy matrix. Fourier transform infrared spectroscopy (FTIR) of pure
epoxy, pure fly ash and selective composites (20 and40 wt % FA-epoxy composites) shows distinct evidence of fly
ash functional groups’ interaction with the epoxy matrix. Some selected SIMS (secondary ion mass
spectrometry) results are presented for the 20wt % fly ash /epoxy composites
Enhancement of Ce/Cr Codopant Solubility and Chemical Homogeneity in TiO 2 Nanoparticles through Sol–Gel versus Pechini Syntheses
International audienceThe Pechini method was more effective in fabricating Ce/Cr codoped TiO2 nanoparticles of superior photocatalytic properties in comparison with the sol-gel method. The improved efficiency was attributed to: a) formation of mixed-phase anatase + rutile with greater homogeneity of dopant incorporation, b) development of open agglomerated morphologies with significantly higher surface areas, and c) favourable valence changes (increased Ti 3+ concentrations) owing to electron exchange in inter valence and/or multi valence charge transfer reactions. Chen, Wen-Fan, et al. "Enhancement of Ce/Cr Codopant Solubility and Abstract Ce/Cr codoped TiO2 nanoparticles were synthesized using sol-gel and Pechini methods with heat treatment at 400°C for 4 h. A conventional sol-gel process produced well crystallized anatase while Pechini synthesis yielded less ordered mixed-phase anatase + rutile; this suggests that the latter method enhances Ce solubility, increases chemical homogeneity, but destabilizes the TiO2 lattice. Greater structural disruption from the decomposition of the Pechini precursor formed more open agglomerated morphologies while the lower levels of structural disruption from pyrolysis of the dried sol-gel precursor resulted in denser agglomerates of lower surface areas. Codoping and associated destabilization of the lattice reduced the binding energies in both powders. Cr 4+ formation in sol-gel powders and Cr 6+ formation in Pechini powders suggest that these valence changes derive from synergistic electron exchange from intervalence and/or multivalence charge transfer. Since Ce is too large to allow either substitutional or interstitial solid solubility, the concept of integrated solubility is introduced, in which the Ti site and an adjacent interstice are occupied by the large Ce ion. The photocatalytic performance data show that codoping was detrimental owing to the effects of reduced crystallinity from lattice destabilization and surface area. Two regimes of mechanistic behavior are seen, which are attributed to the unsaturated solid solutions at lower codopant levels and supersaturated solid solutions at higher levels. The present work demonstrates that the Pechini method offers a processing technique that is superior to sol-gel because the former facilitates solid solubility and consequent chemical homogeneity
Photocatalytic TiO2: From Airless Jet Spray Technology to Digital Inkjet Printing
TiO2 powders can be employed as both photocatalytic and structural materials, leading to applications in external coatings or in interior furnishing devices, including cement mortar, tiles, floorings, and glass supports. The technology of photocatalytic building materials is connected with the widespread production of photocatalytic active tiles. All the techniques proposed in the study involve the employment of nanosized TiO2: this represents a new problem to be dealt with, as inhaling nanoparticles exposes workers during industrial production and people in everyday locations to their dangerousness. Only very recently the employment of microsized TiO2 has been proposed, and the authors in this manuscript report the use of micrometric titania materials, but employing a new deposition technique, which is digital inkjet printing. It represents an improvement of the classical spray coating methods, as it requires piezoelectric heads to precisely direct the deposition of the suspension with an electrostatic field. The mixture contains aqueous/organic components containing micrometric TiO2: to form a suspension, which is printed onto the surface of porcelain grès, large slabs using a digital printer. Many advantages are immediately evident, namely rapid and precise deposition, (almost) no waste of raw materials, thereby highlighting the economy, environmental friendliness, and sustainability of the process. All the materials we obtained have been thoroughly characterized by means of several experimental physico-chemical techniques, such as Raman microspectroscopy and scanning electron microscopy coupled with elemental analysis. Two different model VOCs, ethanol and toluene, and NOx have been selected to test the photocatalytic performances of the abovementioned tiles. Moreover, the antibacterial properties of the tiles have been determined, using Escherichia coli as example. Life cycle assessments (LCAs) for the two processes were modeled for 1 m2 of tiles produced in Modena, Italy. The impact assessments revealed that jet spraying exhibited uniformly greater impacts than digital inkjet printing and that the principal impacts were in human toxicity, cancer effects, freshwater ecotoxicity, and climate change. Most of the impacts were associated with the energy required for the production processes. Further considerations revealed that jet spraying is projected to generate twice as much CO2 and 30% more NOx than digital inkjet printing
Nanopatterned indium tin oxide as a selective coating for solar thermal applications
Indium tin oxide (ITO) coatings have been proposed to reduce thermal emission losses for solar thermal applications. Unfortunately, ITO also has a large amount of free charge carriers (∼1 × 1020 per cm3), which absorb sunlight. To address this issue, we propose a nano-patterned ITO-coated quartz exhibiting both anti-reflectivity (to maximize solar transmission) and low emissivity (to minimize long wavelengths radiative losses). A record small-size nanosphere (∼60 nm) etch mask was prepared via double self-assembly, followed by dry etching and characterisation. In parallel, alternative nanopattern geometries were modelled using the Lumerical FDTD software to optimise short wavelength transmission without diminishing the inherently low emissivity of unetched ITO. It was found that an inverted moth's eye pattern (height = 250 nm and spacing = 80 nm) gave the best results at various solar concentrations (1 sun @ 100 °C, 10 suns @ 400 °C, and 100 suns @ 600 °C), resulting in ∼7% improvement in the solar weighted transmission as well as a similar boost in the overall efficiency factor for selectivity. It was concluded that if the proposed deposition/etching processes can be cost-effectively scaled in a continuous process, it would provide a net performance boost for most solar thermal technologies
Trace Elements in the Si Furnace. Part I: Behavior of Impurities in Quartz During Reduction
Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation
The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5–7.5×10 cms. This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000–4000 fb-1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment
Observation of the Rare Decay of the η Meson to Four Muons
A search for the rare η→μ+μ−μ+μ− double-Dalitz decay is performed using a sample of proton-proton collisions, collected by the CMS experiment at the CERN LHC with high-rate muon triggers during 2017 and 2018 and corresponding to an integrated luminosity of 101 fb−1. A signal having a statistical significance well in excess of 5 standard deviations is observed. Using the η→μ+μ− decay as normalization, the branching fraction B(η→μ+μ−μ+μ−)=[5.0±0.8(stat)±0.7(syst)±0.7(B2μ)]×10−9 is measured, where the last term is the uncertainty in the normalization channel branching fraction. This work achieves an improved precision of over 5 orders of magnitude compared to previous results, leading to the first measurement of this branching fraction, which is found to agree with theoretical predictions
Search for new physics in multijet events with at least one photon and large missing transverse momentum in proton-proton collisions at 13 TeV
A search for new physics in final states consisting of at least one photon, multiple jets, and large missing transverse momentum is presented, using proton-proton collision events at a center-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 137 fb−1, recorded by the CMS experiment at the CERN LHC from 2016 to 2018. The events are divided into mutually exclusive bins characterized by the missing transverse momentum, the number of jets, the number of b-tagged jets, and jets consistent with the presence of hadronically decaying W, Z, or Higgs bosons. The observed data are found to be consistent with the prediction from standard model processes. The results are interpreted in the context of simplified models of pair production of supersymmetric particles via strong and electroweak interactions. Depending on the details of the signal models, gluinos and squarks of masses up to 2.35 and 1.43 TeV, respectively, and electroweakinos of masses up to 1.23 TeV are excluded at 95% confidence level
- …