AIROscope: Ames infrared balloon-borne telescope

A balloon-borne telescope system designed for astronomical observations at infrared wavelengths is discussed. The telescope is gyro-stabilized with updated pointing information derived from television, star tracker, or ground commands. The television system furnishes both course and fine acquisition after initial orientation using a pair of fluxgate servo compasses. Command and control is by a UHF link with 256 commands available. Scientific and engineering data are telemetered to the ground station via narrow band F.M. in the L band. The ground station displays all scientific, engineering and status information during the flights and records the command and telemetry digital bit stream for detailed analysis. The AIROscope telescope has a 28-inch diameter primary mirror and Dall-Kirkham optics. The beam is modulated by oscillating a secondary mirror at 11 or 25 Hz with provision for left or right beam fixed positions by command

An investigation of the behavior of outgassed molecules in thermal vacuums

The objective is to understand how surfaces outgas and how outgassed substances subsequently condense on other surfaces. Preliminary tests produced calculated mass losses that were found to be in reasonable agreement with mass losses determined by weighing the sample before and after testing on analytical balances. However, using test materials with various molecular properties showed characteristic variations in the ratios of calculated total mass loss to experimental loss. These variations indicate that for some molecules energetic barriers to absorption and desorption can exist between outgassed molecules and the surfaces on which they condense

Parental Satisfaction in a Pediatric Intensive Care Unit

Purpose: The purpose of this study was to identify if the factors which indicate parental satisfaction of parents who have children admitted to the Pediatric Intensive Care Unit (PICU) were being attained. The research questions were: 1) Was there a relationship between healthcare environment and parent satisfaction; 2) Was there a relationship between patient care and parent satisfaction; 3) Was there a relationship between communication and parent satisfaction? Parental satisfaction will be defined as meeting the parent’s perceived needs of the child and family during admission to the PICU (McPherson, 1999). This study used McPherson’s Parental Satisfaction Survey (PSS). The conceptual framework for this study was based on Watson’s Transpersonal Human Carative Factors. Design: The PSS is a 24 question survey scored using a Likert scale and a socio- demographic survey that includes three open ended questions to indicate most liked and least liked aspects of the PICU admit and suggestions for improvement. Data for this survey will be collected within the months of March and May of 2003. Method: Data was collected from 101 parents whose child received care in this Appalachian PICU. The PSS measured three domains of caring: (a) hospital environment, (b) patient care, and (c) communication. Findings: The results of this study found very high correlations for hospital environment (r=.75, p Conclusion: Watson’s Theoretical Framework was used in this study to closely examine the inter-personal health care member to parent/patient interaction. This study has indicated a very high parental satisfaction correlation with hospital environment, patient care and communication administered in this facility. The results of the PSS report a Cronbach’s coefficient alpha yielding α =.89, indicating that the study is reliable. Continuing research is needed to discover and assess new aspects of parental satisfaction of patient care in the PICU

Materials selection for long life in LEO: A critical evaluation of atomic oxygen testing with thermal atom systems

The use of thermal atom test methods as a materials selection and screening technique for low-Earth orbit (LEO) spacecraft is critically evaluated. The chemistry and physics of thermal atom environments are compared with the LEO environment. The relative reactivities of a number of materials determined to be in thermal atom environments are compared to those observed in LEO and in high quality LEO simulations. Reaction efficiencies measured in a new type of thermal atom apparatus are one-hundredth to one-thousandth those observed in LEO, and many materials showing nearly identical reactivities in LEO show relative reactivities differing by as much as a factor of 8 in thermal atom systems. A simple phenomenological kinetic model for the reaction of oxygen atoms with organic materials can be used to explain the differences in reactivity in different environments. Certain specific thermal test environments can be used as reliable materials screening tools. Using thermal atom methods to predict material lifetime in LEO requires direct calibration of the method against LEO data or high quality simulation data for each material

Atomic oxygen degradation of Intelsat 4-type solar array interconnects: Laboratory investigations

A Hughes 506 type communication satellite belonging to the Intelsat organization was marooned in low Earth orbit on March 14, 1990, following failure of the Titan third stage to separate properly. The satellite, Intelsat VI, was designed for service in geosynchronous orbit and contains several material configurations which are susceptible to attack by atomic oxygen. Analysis showed the silver foil interconnects in the satellite photovoltaic array to be the key materials issue because the silver is exposed directly to the atomic oxygen ram flux. The results are reported of atomic oxygen degradation testing of Intelsat VI type silver foil interconnects both as virgin material and in a configured solar cell element. Test results indicate that more than 80 pct. of the original thickness of silver in the Intelsat VI solar array interconnects should remain after completion of the proposed Space Shuttle rescue and/or reboost mission

A comparison of ground-based and space flight data: Atomic oxygen reactions with boron nitride and silicon nitride

The effects of atomic oxygen on boron nitride (BN) and silicon nitride (Si3N4) have been studied in low Earth orbit (LEO) flight experiments and in a ground-based simulation facility at Los Alamos National Laboratory. Both the in-flight and ground-based experiments employed the materials coated over thin (approx 250 Angstrom) silver films whose electrical resistance was measured in situ to detect penetration of atomic oxygen through the BN and Si3N4 materials. In the presence of atomic oxygen, silver oxidizes to form silver oxide, which has a much higher electrical resistance than pure silver. Permeation of atomic oxygen through BN, as indicated by an increase in the electrical resistance of the silver underneath, was observed in both the in-flight and ground-based experiments. In contrast, no permeation of atomic oxygen through Si3N4 was observed in either the in-flight or ground-based experiments. The ground-based results show good qualitative correlation with the LEO flight results, thus validating the simulation fidelity of the ground-based facility in terms of reproducing LEO flight results

International photovoltaic program. Volume 2: Appendices

The results of analyses conducted in preparation of an international photovoltaic marketing plan are summarized. Included are compilations of relevant statutes and existing Federal programs; strategies designed to expand the use of photovoltaics abroad; information on the domestic photovoltaic plan and its impact on the proposed international plan; perspectives on foreign competition; industry views on the international photovoltaic market and ideas about the how US government actions could affect this market;international financing issues; and information on issues affecting foreign policy and developing countries

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies

Disseminated Mycobacterium genavense Infection in Two Patients with AIDS

Mycobacterium genavense is a recently defined fastidious organism that has been identified as a cause of disseminated infection in patients with AIDS. We report the cases of two patients who had advanced AIDS and a clinical syndrome of fever, anorexia, abdominal pain, diarrhea, and weight loss. In addition, splenomegaly and lymphadenopathy were prominent in both cases, and in one patient's case radiographic findings were suggestive of splenic abscesses. Mycobacteria isolated from specimens of blood and bone marrow grew in liquid media but not on solid media. The results of DNA probe tests for Mycobacterium tuberculosis and Mycobacterium avium complex were false-positive for both patients. After treatment of the broth cultures to lyse red blood cells, the results of DNA probe tests were negative for these pathogens. Amplification and sequencing of 16S rRNA with use of the polymerase chain reaction indicated that the mycobacterial isolates from both patients had sequences identical to those previously reported for M. genavense. One patient survived 5 months after diagnosis, the other 2 months after diagnosis; only one patient responded (transiently) to antimycobacterial chemotherap