The Influence of Feedback on the Aeroelastic Behavior of Tilt Proprotor Aircraft Including the Effects of Fuselage Motion

The influence of single loop feedbacks to improve the stability of the system are considered. Reduced order dynamic models are employed where appropriate to promote physical insight. The influence of fuselage freedom on the aeroelastic stability, and the influence of the airframe flexibility on the low frequency modes of motion relevant to the stability and control characteristics of the vehicle were examined

Autoparametric Excitation and Self-powered SSHI for Power Enhancement in Piezoelectric Vibration Energy Harvester

© Published under licence by IOP Publishing Ltd. We proposed an autoparametric excitation harvester employing a microfabricated leaf spring for the base beam and a synchronized switch harvesting on inductor (SSHI) interface. Our harvester achieved miniaturization, low threshold acceleration of the autoparametric excitation, and increase in output power, compared with the previous work. The base beam for amplifying the excitation was microfabricated from a stainless steel film, through the photolithography followed by the wet-chemical etching. To trigger the autoparametric excitation, the main and the base beams are designed such that the resonance frequency for the base beam becomes twice higher than that for the main beam. The resonance frequencies obtained in experiment for the main and the base beams were 26.6 and 53.1 Hz, respectively. This study employed a self-powered parallel SSHI interface, which can increase the piezoelectric voltage and thus the output power, consuming only a small portion of the harvested energy. The harvester connected with the self-powered SSHI interface successfully displayed the autoparametric excitation at acceleration greater than 1.0 m/s2, and the output power showed 1.12 mW at the frequency of 53.1 Hz under the acceleration of 2.0 m/s2, which is 1.43-fold increase over the standard AC-DC interface

Numerical Investigation of Mechanically and Electrically Switching SSHI in Highly Coupled Piezoelectric Vibration Energy Harvester

© Published under licence by IOP Publishing Ltd. In aiming to increase output power for piezoelectric vibration energy harvesters, a self-powered synchronized switch harvesting on inductor (SSHI) using an electrical or mechanical switch has considerable attention. However, the advantages and disadvantages of the two switching technique for the self-powered SSHIs remains unclear. In addition, for a harvester with a high electromechanical coupling coefficient k, the piezoelectric damping force, which enhances by the SSHI's voltage increase, is likely to reduce the harvester's displacement and thus lower the output power. We developed simulation technique, and numerically investigated the performance for the electrical switch SSHI (ESS) and for the mechanical switch SSHI (MSS) harvester, considering the feedback of the piezoelectric damping force. The numerical investigation revealed that, for the ESS, the piezoelectric damping force reduces the displacement every switching on at the maximum/minimum displacement, and thus lowers the output power. In contrast, the MSS, in which the switch turns on only when the displacement exceeds the gap distance, achieved a higher output power, and exhibited intriguing phenomena that the output power continues to increase, whereas the displacement is held constant. Therefore, for a harvester with high k, the MSS can outweigh the ESS

Folded Spring and Mechanically Switching SSHI for High Performance Miniature Piezoelectric Vibration Energy Harvester

To downsize the clamp area and increase the output power of the harvester, we developed a miniature piezoelectric vibration energy harvester with combining a Z-shaped folded spring and a mechanically-switching SSHI (synchronized switch harvesting on inductor). The overall harvester size is 4i×2i×3 cm3. The FEM analysis revealed that the output power increases and the value of the 1st and 2nd resonance frequencies move closer as the angle of the Z-shaped spring decreases, therefore, the smaller angle would be more promising. The experimental results showed that the maximum output power of our harvester for the 1st (20.2 Hz) and 2nd (53.0 Hz) resonance frequencies at the applied acceleration of 4.9 m/s2 are 088 and 0.98 mW, respectively. The reason for a marked enhancement of the output power for the 2nd resonance frequency is attributed to the vertical movement of the 2nd vibrational mode which applies larger mechanical stress to the piezo ceramic and achieves better electrical contact between the tip of the Z-shaped spring and the spring plunger. © Published under licence by IOP Publishing Ltd

Geometrical Models of the Phase Space Structures Governing Reaction Dynamics

Hamiltonian dynamical systems possessing equilibria of ${saddle} \times {centre} \times...\times {centre}$ stability type display \emph{reaction-type dynamics} for energies close to the energy of such equilibria; entrance and exit from certain regions of the phase space is only possible via narrow \emph{bottlenecks} created by the influence of the equilibrium points. In this paper we provide a thorough pedagogical description of the phase space structures that are responsible for controlling transport in these problems. Of central importance is the existence of a \emph{Normally Hyperbolic Invariant Manifold (NHIM)}, whose \emph{stable and unstable manifolds} have sufficient dimensionality to act as separatrices, partitioning energy surfaces into regions of qualitatively distinct behavior. This NHIM forms the natural (dynamical) equator of a (spherical) \emph{dividing surface} which locally divides an energy surface into two components (`reactants' and `products'), one on either side of the bottleneck. This dividing surface has all the desired properties sought for in \emph{transition state theory} where reaction rates are computed from the flux through a dividing surface. In fact, the dividing surface that we construct is crossed exactly once by reactive trajectories, and not crossed by nonreactive trajectories, and related to these properties, minimizes the flux upon variation of the dividing surface. We discuss three presentations of the energy surface and the phase space structures contained in it for 2-degree-of-freedom (DoF) systems in the threedimensional space $\R^3$, and two schematic models which capture many of the essential features of the dynamics for $n$-DoF systems. In addition, we elucidate the structure of the NHIM.Comment: 44 pages, 38 figures, PDFLaTe

Energy Landscape and Global Optimization for a Frustrated Model Protein

The three-color (BLN) 69-residue model protein was designed to exhibit frustrated folding. We investigate the energy landscape of this protein using disconnectivity graphs and compare it to a Go model, which is designed to reduce the frustration by removing all non-native attractive interactions. Finding the global minimum on a frustrated energy landscape is a good test of global optimization techniques, and we present calculations evaluating the performance of basin-hopping and genetic algorithms for this system.Comparisons are made with the widely studied 46-residue BLN protein.We show that the energy landscape of the 69-residue BLN protein contains several deep funnels, each of which corresponds to a different β-barrel structure

Biallelic mutations in nucleoporin NUP88 cause lethal fetal akinesia deformation sequence

Nucleoporins build the nuclear pore complex (NPC), which, as sole gate for nuclear-cytoplasmic exchange, is of outmost importance for normal cell function. Defects in the process of nucleocytoplasmic transport or in its machinery have been frequently described in human diseases, such as cancer and neurodegenerative disorders, but only in a few cases of developmental disorders. Here we report biallelic mutations in the nucleoporin NUP88 as a novel cause of lethal fetal akinesia deformation sequence (FADS) in two families. FADS comprises a spectrum of clinically and genetically heterogeneous disorders with congenital malformations related to impaired fetal movement. We show that genetic disruption of nup88 in zebrafish results in pleiotropic developmental defects reminiscent of those seen in affected human fetuses, including locomotor defects as well as defects at neuromuscular junctions. Phenotypic alterations become visible at distinct developmental stages, both in affected human fetuses and in zebrafish, whereas early stages of development are apparently normal. The zebrafish phenotypes caused by nup88 deficiency are rescued by expressing wild-type Nup88 but not the disease-linked mutant forms of Nup88. Furthermore, using human and mouse cell lines as well as immunohistochemistry on fetal muscle tissue, we demonstrate that NUP88 depletion affects rapsyn, a key regulator of the muscle nicotinic acetylcholine receptor at the neuromuscular junction. Together, our studies provide the first characterization of NUP88 in vertebrate development, expand our understanding of the molecular events causing FADS, and suggest that variants in NUP88 should be investigated in cases of FADS

Spectral splitting photovoltaics using perovskite and wideband dye-sensitized solar cells

The extension of the light absorption of photovoltaics into the near-infrared region is important to increase the energy conversion efficiency. Although the progress of the lead halide perovskite solar cells is remarkable, and high conversion efficiency of >20% has been reached, their absorption limit on the long-wavelength side is similar to 800 nm. To further enhance the conversion efficiency of perovskite-based photovoltaics, a hybridized system with near-infrared photovoltaics is a useful approach. Here we report a panchromatic sensitizer, coded DX3, that exhibits a broad response into the near-infrared, up to similar to 1100 nm, and a photocurrent density exceeding 30 mA cm(-2) in simulated air mass 1.5 standard solar radiation. Using the DX3-based dye-sensitized solar cell in conjunction with a perovskite cell that harvests visible light, the hybridized mesoscopic photovoltaics achieved a conversion efficiency of 21.5% using a system of spectral splitting.open0