127 research outputs found
Research investigation of helicopter main rotor/tail rotor interaction noise
Acoustic measurements were obtained in a Langley 14 x 22 foot Subsonic Wind Tunnel to study the aeroacoustic interaction of 1/5th scale main rotor, tail rotor, and fuselage models. An extensive aeroacoustic data base was acquired for main rotor, tail rotor, fuselage aerodynamic interaction for moderate forward speed flight conditions. The details of the rotor models, experimental design and procedure, aerodynamic and acoustic data acquisition and reduction are presented. The model was initially operated in trim for selected fuselage angle of attack, main rotor tip-path-plane angle, and main rotor thrust combinations. The effects of repositioning the tail rotor in the main rotor wake and the corresponding tail rotor countertorque requirements were determined. Each rotor was subsequently tested in isolation at the thrust and angle of attack combinations for trim. The acoustic data indicated that the noise was primarily dominated by the main rotor, especially for moderate speed main rotor blade-vortex interaction conditions. The tail rotor noise increased when the main rotor was removed indicating that tail rotor inflow was improved with the main rotor present
Correlation between magnetism and spin-dependent transport in CoFeB alloys
We report a correlation between the spin polarization of the tunneling
electrons (TSP) and the magnetic moment of amorphous CoFeB alloys. Such a
correlation is surprising since the TSP involves s-like electrons close to the
Fermi level (EF), while the magnetic moment mainly arises due to all
d-electrons below EF. We show that probing the s and d-bands individually
provides clear and crucial evidence for such a correlation to exist through s-d
hybridization, and demonstrate the tuneability of the electronic and magnetic
properties of CoFeB alloys.Comment: Accepted for publication in Physical Review Letters. Letter (4 pages)
and Supplementary material (4 pages
Recommended from our members
A Token Ring Protocol for Dynamic Ad-hoc Wireless Environments
A wireless ad-hoc networking protocol is presented. The protocol is designed to be flexible, easy to use and adaptable to a wide variety of potential applications. The primary considerations in design are small code size, guaranteed bandwidth access, limited delay, and error resilience in a highly dynamic ad-hoc environment. These considerations are achieved through the use of token ring protocol
Trends of HCl, ClONOâ‚‚, and HF column abundances from ground-based FTIR measurements in Kiruna (Sweden) in comparison with KASIMA model calculations
Trends of hydrogen chloride (HCl), chlorine nitrate (ClONO2), and hydrogen fluoride (HF) total column abundances above Kiruna (Northern Sweden, 67.84, 20.41) derived from nearly 14 years (1996–2009) of measurement and model data are presented. The measurements have been performed with a Bruker 120HR (later Bruker 125 HR) Fourier transform infrared (FTIR) spectrometer and the chemistry-transport model (CTM) used was KASIMA (KArlsruhe SImulation model of the Middle Atmosphere). The total column abundances of ClONO2 and HF calculated by KASIMA agree quite well with the FTIR measurements while KASIMA tends to underestimate the HCl columns. To calculate the long-term trends, a linear function combined with an annual cycle was fitted to the data using a least squares method. The precision of the resulting trends was estimated with the bootstrap resampling method. For HF, both model and measurements show a positive trend that seems to decrease in the last few years. This suggests a stabilisation of the HF total column abundance. Between 1996 and 2009, KASIMA simulates an increase of (+1.51±0.07) %/yr which exceeds the FTIR result of (+0.65±0.25) %/yr. The trends determined for HCl and ClONO2 are significantly negative over the time period considered here. This is expected because the emission of their precursors (chlorofluorocarbons and hydrochlorofluorocarbons) has been restricted in the Montreal Protocol in 1987 and its amendments and adjustments. The trend for ClONO2 from the FTIR measurements amounts to (−3.28±0.56)%/yr and the one for HCl to (−0.81±0.23)%/yr. KASIMA simulates a weaker decrease: For ClONO2, the result is (−0.90±0.10) %/yr and for HCl (−0.17±0.06) %/yr. Part of the difference between measurement and model data can be explained by sampling and the stronger annual cycle indicated by the measurements. There is a factor of about four between the trends of HCl and ClONO2 above Kiruna for both measurement and model data
A new type of temperature driven reorientation transition in magnetic thin films
We present a new type of temperature driven spin reorientation transition
(SRT) in thin films. It can occur when the lattice and the shape anisotropy
favor different easy directions of the magnetization. Due to different
temperature dependencies of the two contributions the effective anisotropy may
change its sign and thus the direction of the magnetization as a function of
temperature may change. Contrary to the well-known reorientation transition
caused by competing surface and bulk anisotropy contributions the reorientation
that we discuss is also found in film systems with a uniform lattice
anisotropy. The results of our theoretical model study may have experimental
relevance for film systems with positive lattice anisotropy, as e.g. thin iron
films grown on copper.Comment: 7 pages, 4 figures, accepted for publication in EPJ
Application of portable FTIR spectrometers for detecting greenhouse gas emissions of the major city Berlin
Five portable Bruker EM27/SUN FTIR (Fourier transform infrared) spectrometers have been used for the accurate and precise observation of column-averaged abundances of CO2 and CH4 around the major city Berlin. In the work by Frey et al. (2015), a calibration procedure is developed and applied to the set of spectrometers used for the Berlin campaign. Here, we describe the observational setup of the campaign and aspects of the data analysis, and we present the recorded time series of XCH4 and XCO2. We demonstrate that the CO2 emissions of Berlin can be clearly identified in the observations. A simple dispersion model is applied which indicates a total strength of the Berlin source of about 0.8 t CO2 s-1. In the Supplement of this work, we provide the measured data set and auxiliary data. We hope that the model community will exploit this unique data set for state-of-the art inversion studies of CO2 and CH4 sources in the Berlin area. © Author(s) 2015
Use of portable FTIR spectrometers for detecting greenhouse gas emissions of the megacity Berlin - Part 2: Observed time series of XCOâ‚‚ and XCHâ‚„
Five portable Bruker EM27/SUN FTIR spectrometers have been used for the accurate and precise observation of column averaged abundances of CO2 and CH4 around the megacity Berlin. In the first part of this work (Frey et al., 2015) we have presented the various measures that were undertaken to ensure that the observations are consistent between sites, accurate and precise. Here, we present the recorded time series of XCH4 and XCO2 and demonstrate that the CO2 emissions of Berlin can be clearly identified in the observations. A simple dispersion model is applied which indicates a total strength of the Berlin source of about 0.8 t CO2 s-1. In the Supplement of this work, we provide the measured dataset and auxiliary data. We hope that the model community will exploit this unique dataset for state-of-the art inversion studies of CO2 and CH4 sources in the Berlin area
Trends of HCl, ClONOâ‚‚ and HF column abundances from ground-based FTIR measurements in Kiruna (Sweden) in comparison with KASIMA model calculations
Critical Susceptibility Exponent Measured from Fe/W(110) Bilayers
The critical phase transition in ferromagnetic ultrathin Fe/W(110) films has
been studied using the magnetic ac susceptibility. A statistically objective,
unconstrained fitting of the susceptibility is used to extract values for the
critical exponent (gamma), the critical temperature Tc, the critical amplitude
(chi_o) and the range of temperature that exhibits power-law behaviour. A
fitting algorithm was used to simultaneously minimize the statistical variance
of a power law fit to individual experimental measurements of chi(T). This
avoids systematic errors and generates objective fitting results. An ensemble
of 25 measurements on many different films are analyzed. Those which permit an
extended fitting range in reduced temperature lower than approximately .00475
give an average value gamma=1.76+-0.01. Bilayer films give a weighted average
value of gamma = 1.75+-0.02. These results are in agreement with the
-dimensional Ising exponent gamma= 7/4. Measurements that do not exhibit
power-law scaling as close to Tc (especially films of thickness 1.75ML) show a
value of gamma higher than the Ising value. Several possibilities are
considered to account for this behaviour.Comment: -Submitted to Phys. Rev. B -Revtex4 Format -6 postscript figure
- …