162 research outputs found

    Tracing the Initiation of the Tribeč Mountain Exhumation by Laser-Probe <sup>40</sup>Ar/<sup>39</sup>Ar Dating of Seismogenic Pseudotachylytes (Western Carpathians, Slovakia)

    Get PDF
    The seismogenic pseudotachylytes from the Tribeč Mountains (Western Carpathians, Slovakia) were dated by means of the laser microprobe 40Ar/39Ar method. The Tribeč Mountain crystalline basement was buried to 5–7.5-km depths, where it experienced approximately >110°C and <210°C thermal conditions. The dated pseudotachylytes have spot ages between 58 ± 1 and 46 ± 1 Ma with a weighted mean age of 49.7 ± 1.3 Ma, indicating that seismic activity caused their origin, the propagation of subvertical basement marginal faults, and/or the inception of basement unroofing processes in the southern part of the Central Carpathian Paleogene Basin. The extensional tectonics were responsible for the exhumation of basement highs and the opening of the intramontane depressions on the northwest margin of the Pannonian Basin

    Pseudokarst Caves of Slezské Beskydy Mountain as Hibernating Places of Animals

    Get PDF
    Import 29/09/2010Tato práce má dvě části. Teoretická část popisuje pseudokrasové jeskyně Moravskoslezských Beskyd. Dále práce popisuje způsob života v jeskynních ekosystémech a hlavní ekologické faktory, které nejvíce podmiňují výskyt živočichů v podzemí. Praktickou částí této práce je výzkum prováděný v období října 2008 až února 2009, který prokazuje některé zimující živočichy v jeskyních Na Gírové ve Slezských Beskydech.This thesis is divided into two parts theoretical part and research part. Theoretical part describes pseudokarst caves of Moravskoslezské Beskydy Mountains. Another theoretical part of this work is to describe subterranean life, and main conditions of underground living.. Research part attempts to prove that there are some animals hibernating in pseudkarst caves of Gírová mountain during the winter 2008/2009.Prezenční546 - Institut environmentálního inženýrstvívelmi dobř

    Methodology for evaluating the cause of an accident at specific traffic accidents

    Get PDF
    For traffic accidents when one vehicle enter into the opposite direction lane, the criterion for the cause of an accident (for most cases) is the collision place. In most car accidents when a vehicle enters the opposite lane, this happen suddenly, sometimes sliding sideways, and in such cases it is (the collision place) a very good indicator for the causes of traffic accidents. Rarely, however, there are also accidents, where there is not decisive in which lane impact happened. Such traffic accidents, however, occur very rarely and by the experts are often considered for the assessment of the causes of traffic accidents wrong. The present article focuses on the methodology of evaluation of the causes of an accident just when such specific cases.Pri dopravných nehodách kedy dôjde k prejazdu vozidla do protismeru je kritériom pre vyhodnotenie príčiny dopravnej nehody (a to v drvivej väčšine prípadov) miesto zrážky, čiže určenie, ktoré vozidlo prešlo do protismerného jazdného pruhu. Vo väčšine dopravných nehôd, kedy vozidlo prejde do protismerného jazdného pruhu, dôjde k tomuto prejazdu náhle, niekedy v bočnom šmyku, pričom v takýchto prípadoch je kritérium miesta zrážky veľmi dobrým ukazovateľom príčiny dopravnej nehody. Zriedka sa však vyskytujú aj dopravné nehody, kedy nie je rozhodujúce v ktorom jazdnom pruhu došlo k zrážke. Takéto dopravné nehody sa však vyskytujú veľmi ojedinele a zo strany znalcov sú často posudzované z hľadiska vyhodnotenia príčiny dopravnej nehody nesprávne. Predmetný príspevok je zameraný na metodiku vyhodnotenia príčiny dopravnej nehody práve pri takýchto špecifických prípadoch

    Learning to Generate Images with Convolutional Neural Networks

    Get PDF
    Tato bakalářská práce se zabývá navržením a analýzou konvolučních neuronových sítí generujících obrázky znaků na základě jejich parametrů. Parametry znaků jsou typ znaku, font, barva znaku, barva pozadí, translace a rotace. Neuronové sítě si vytvořily mnohorozměrnou reprezentaci jednotlivých parametrů. V rámci těchto reprezentací existují podobné vztahy jako v rámci samotných parametrů. Neuronové sítě generují znaky s novými hodnotami prametrů na základě interpolace mezi naučenými hodnotami parametrů. Neuronové sítě jsou schopné generalizace problému generování obrazu.The aim of this Bachelor's thesis is to design and analyze convolutional neural networks generating images of characters based on their parameters. Parameters of characters are type of char, font, colour of character, background colour, translation and rotation. Neural networks have created multidimensional representation of each parameter. Relations inside these representation are similar to relations inside parameters. Neural networks generate characters with new values of parameters based on interpolation between learned values of parameters. Neural networks are capable to generalize problem of generating images.

    Mentalizing during communicative acts

    Get PDF
    Successful communication often requires people to account for one another’s mental states. Previous research has focused primarily on how this is achieved between speakers and listeners; in contrast, the issue of how listeners account for another listener’s mental state has not been investigated thoroughly. In my thesis, I report a series of studies that seek to address this gap in the literature. Across four empirical studies, I investigate: a) the neural processes involved in tracking another listener’s comprehension, b) the importance of task and situational demands on social language comprehension, and c) the relationship between levels of processing and social language comprehension. The results of these investigations provide insight into both the behaviour and the neurocognitive processes supporting the behaviour of co-listeners. Specifically, my results suggest that both mentalizing and simulation are important mechanisms allowing us to achieve insight into the comprehension of other listeners. Importantly, we do not automatically track everything about the experience of other listeners: low level features of language are not processed from another listener’s perspective. In addition, the task demands and situational constraints in which co-listeners find themselves heavily influences whether or not perspectives will be shared. Taken together, the findings discussed in this work contribute to new models of language comprehension in social contexts

    Economy building refrigeration systems

    Get PDF
    Práce se zabývá systémy chlazení. Analyzuje možnosti optimalizace chladících procesů a s tím související úspory energie. V praktické aplikaci na výrobní budově, kde vzniká potřeba chlazení výrobní technologie, porovnává referenční systém s dvěma optimalizovanými alternativami. Alternativa zpětného využití odpadního tepla z chlazení podporuje vytápění a ohřev teplé vody a systémem volného chlazení snižuje energetickou náročnost v chladném období roku. Experimentální část posuzuje vhodnost podlahového chlazení ve vztahu k rozvrstvení teploty vzduchu po výšce místnosti a vliv na tepelný komfort osob.The thesis deals with the refrigeration systems. It analyzes ways to optimize the refrigeration process and the associated energy savings. In a practical application on an industrial building where there is the need of cooling the machinery, it compares the reference system with another two optimized alternatives. The heat recovery alternative supports heating and hot water supply and the water-side free cooling alternative lowers the energy consumption during the cold period of the year. The experimental section assesses the suitability of floor cooling in relation to the stratification of air temperature along the height of the room and the effect on thermal comfort of people.

    Comparison of Pulsating Flow of Newtonian and non-Newtonian Fluid in Complex Geometry

    Get PDF
    Tato diplomová práce se zabývá pulsujícím prouděním newtonské a ne-newtonské kapaliny. V teoretické části jsou uvedeny potřebné teoretické znalosti jak obecně k pulsujícímu proudění, tak k ne-newtonskému chování kapaliny. Dále se práce zaměřuje na numerické modelování pulsujícího proudění v přímé, ideálně tuhé trubici a v „patient-specific“ modelu lidské tepny, přesněji v karotidě. Jsou použity dvě metody: numerické řešení pomocí metody konečných objemů (MKO) a také analytické řešení pomocí Besselových funkcí (tzv. Womersley). Výsledky jsou validovány proti experimentálnímu měření metodou „particle image velocimetry“ (PIV). Shoda numerického řešení s experimentálními daty je vzhledem k nepřesnostem PIV velmi dobrá z obou pohledů - kvalitativně i kvantitativně. Numerické řešení dále srovnává vliv turbulence a ne-newtonské kapaliny vůči bázi (laminární, newtonská kapalina). Vyvinutá metodika je v závěru aplikována na „patient-specific“ model karotidy, zrekonstruovaný z CT snímků. Měření in vivo je v lidských tepnách velmi nákladné a často invazivní. Výstupy z měření jsou tak omezené, většinou pouze na tlak a průtok. Výpočtové modelování proudění (CFD) je neinvazivní a výstupy jsou přes celou doménu. Díky těmto výhodám CFD výrazně přispívá k pochopení vlivu hemodynamiky při tvorbě kardiovaskulárních onemocnění.This master's thesis deals with pulsating flow of Newtonian and non-Newtonian fluid. Theoretical part represents necessary theoretical knowledge for pulsating flow and understanding of non-Newtonian behaviour. Furthermore the thesis focus is directed on numerical simulation of pulsating flow in straight, ideally rigid tube and in patient-specific model of human artery, more precisely in carotid. Two methods are used: numerical solution based on finite volume method (FVM) and also analytical solution using Bessel functions by Womersley. Results are validated against experimental measurements of velocity profiles by particle image velocity method (PIV). The agreement between numerical and experimental data with consideration of PIV inaccuracy was was very good from both point of views - qualitative and quantitative. Numerical solution also compare influence of turbulence and non-Newtonian behaviour towards base (laminar flow, Newtonian fluid). Developed methodology is then applied on patient-specific model of carotid, which was renovated from computed tomography. Measurements in vivo in human arteries is very expensive and often invasive. Because of that measurement outputs are limited, most of the time on pressure and flow. Computational fluid dynamics (CFD) is non-invasive and outputs are through whole domain. Due to these advantages CFD significantly contributes to understanding of hemodynamics influence in cardiovascular diseases.

    Using measuring probes ( for tools and workpieces) for production machine of range of products firm TOS KUŘIM

    Get PDF
    Práce má seznámit čtenáře se základním rozdělením sond pro měření obrobků a nástrojů. Zejména pak v oblasti měření na CNC obráběcích centrech. Je zde uvedeno jejich třídění jak z hlediska principu funkce senzorů a druhu přenosu signálu do řídícího systému, tak i z hlediska konstrukčního provedení. Dále se zabývá příslušenstvím těchto sond (doteky atd.) a pravidly pro jeho vhodný výběr. V další části práce je uveden výběr vhodných sond k jednotlivým univerzálním strojům s produkce firmy TOS Kuřim. Poslední část práce se zabývá testováním navrženého měřícího systému pro konkrétní stroj z produkce firmy TOS Kuřim. Je zde uvedena jeho typová skladba, vyhodnocení výsledků testovacích měření a dosahovaná přesnost.The purpose of this dissertation is to familiarize the reader with basic recognition of machine measuring probes for tools and workpieces. Namely then in area of measurement on CNC machining centers. Both recognition from aspects of principle of function of sensing elements and type of transmition to control system, and recognition from constructional aspects are described here. Further it puts mind on equipment of machine probes (touches etc.) and rules for best selection of this equipment. Next part of this work describes selection of appropriate probes, for universal machines from production of firm TOS Kuřim. Last part deals with testing of designed measuring system for concrete machine from production of firm TOS Kuřim. His typical composition, evaluation of tests results and achieved accuracy is also described here.
    corecore