430 research outputs found
Solid Modeling and Finite Element Analysis of an Overhead Crane Bridge
The design of an overhead crane bridge with a double box girder has been investigated and a case study of a crane with 35 ton capacity and 13 m span length has been conducted. In the initial phase of the case study, conventional design calculations proposed by F. E. M. Rules and DIN standards were performed to verify the stress and deflection levels. The crane design was modeled using both solids and surfaces. Finite element meshes with 4-node tetrahedral and 4-node quadrilateral shell elements were generated from the solid and shell models, respectively. After a comparison of the finite element analyses, the conventional calculations and performance of the existing crane, the analysis with quadratic shell elements was found to give the most realistic results. As a result of this study, a design optimization method for an overhead crane is proposed.
Synthesis of Graphene on Gold
Here we report chemical vapor deposition of graphene on gold surface at
ambient pressure. We studied effects of the growth temperature, pressure and
cooling process on the grown graphene layers. The Raman spectroscopy of the
samples reveals the essential properties of the graphene grown on gold surface.
In order to characterize the electrical properties of the grown graphene
layers, we have transferred them on insulating substrates and fabricated field
effect transistors. Owing to distinctive properties of gold, the ability to
grow graphene layers on gold surface could open new applications of graphene in
electrochemistry and spectroscopy.Comment: 8 pages, 4 figure
Temperature dependence of the first-order Raman scattering in GaS layered crystals
Cataloged from PDF version of article.The temperature dependence (15-293 K) of the six Raman-active mode frequencies and linewidths in gallium sulfide has been measured in the frequency range from 15 to 380 cm(-1). We observed softening and broadening of the optical phonon lines with increasing temperature. Comparison between the experimental data and theories of the shift and broadening of the interlayer and intralayer phonon lines during the heating of the crystal showed that the experimental dependencies can be explained by the contributions from thermal expansion and lattice anharmonicity. The pure-temperature contribution (phonon-phonon coupling) is due to three- and four-phonon processes. (C) 2000 Elsevier Science Ltd. All rights reserved
Topological transitions in carbon nanotube networks via nanoscale confinement
Efforts aimed at large-scale integration of nanoelectronic devices that
exploit the superior electronic and mechanical properties of single-walled
carbon nanotubes (SWCNTs) remain limited by the difficulties associated with
manipulation and packaging of individual SWNTs. Alternative approaches based on
ultra-thin carbon nanotube networks (CNNs) have enjoyed success of late with
the realization of several scalable device applications. However, precise
control over the network electronic transport is challenging due to i) an often
uncontrollable interplay between network coverage and its topology and ii) the
inherent electrical heterogeneity of the constituent SWNTs. In this letter, we
use template-assisted fluidic assembly of SWCNT networks to explore the effect
of geometric confinement on the network topology. Heterogeneous SWCNT networks
dip-coated onto sub-micron wide ultra-thin polymer channels exhibit a topology
that becomes increasingly aligned with decreasing channel width and thickness.
Experimental scale coarse-grained computations of interacting SWCNTs show that
the effect is a reflection of an aligned topology that is no longer dependent
on the network density, which in turn emerges as a robust knob that can induce
semiconductor-to-metallic transitions in the network response. Our study
demonstrates the effectiveness of directed assembly on channels with varying
degrees of confinement as a simple tool to tailor the conductance of the
otherwise heterogeneous network, opening up the possibility of robust
large-scale CNN-based devices.Comment: 4 pages, 3 figure
Value of preoperative spirometry to predict postoperative pulmonary complications
AbstractIn order to determine the incidence of postoperative pulmonary complications (POPC) and the value of preoperative spirometry to predict pulmonary complications after upper abdominal surgery, 24 women and 36 men (total 60 patients) were studied prospectively (mean age 48·3 years). On the day before the operation and for 15 days after the operation, each patients's respiratory status was assessed by clinical examination, chest radiography, spirometry and blood gas analysis, and patients were monitored for pulmonary complications by a chest physician and a surgeon independently. In this study, postoperative pulmonary complications developed in 21 (35%) patients (pneumonia in 10 patients, bronchitis in nine patients, atelectasis in one patient, pulmonary embolism in one patient). Of 31 patients with abnormal preoperative spirometry, 14 (45·2%) patients showed complications, whereas among 29 patients with normal preoperative spirometry, 7 (24·1%) patients showed complications (P<0·05). The incidence of POPC was higher in patients with advanced age, smoking, preoperative abnormal findings obtained from physical examination of the chest, higher ASA class and longer duration of operation. The sensitivity (0·76) and specificity (0·79) of abnormal preoperative findings obtained from physical examination to predict POPC were higher than abnormal preoperative spirometry (0·67 and 0·56 retrospectively). There was no significant difference between patients with and without pulmonary complications in regard to weight, serum albumin, type of incision, incidence of abnormal preoperative blood gases and duration of postoperative hospital stay. We conclude that POPC is still a serious cause of postoperative morbidity. Multiple risk factors include preoperative abnormal spirometry responsible for development of POPC. If used alone, spirometry has limited clinical value as a screening test to predict POPC after upper abdominal surgery
Human transcriptome corresponding to human oocytes and use of said genes or the corresponding polypeptides to trans-differentiate somatic cells
The identification of 101 genes upregulated or differentially expressed by mature human oocytes is provided herein. These genes and the corresponding gene products will facilitate a greater understanding of oogenesis, folliculogenesis, fertilization, and embryonic development. In addition these genes and the corresponding gene products can be used to effect dedifferentiation and/or transdifferentiation of desired somatic cells. The resultant dedifferentiated cells and somatic cells derived therefrom can be used in cell therapies such as in the treatment of cancer, autoimmunity, and other diseases wherein specific types of cells such as hematopoietic cells may be depleted because of the underlying disease or the treatment of the disease. Also, a core group of 66 transcripts was identified by intersecting significantly up-regulated genes of the human oocyte with those from the mouse oocyte and from human and mouse embryonic stem cells. Within the up-regulated probe sets, the top overrepresented categories were related to RNA and protein metabolism, followed by DNA metabolism and chromatin modification. This invention therefore provides a comprehensive expression baseline of genes expressed in in vivo matured human oocytes. Further understanding of the biological role of these genes will also expand knowledge on meiotic cell cycle, fertilization, chromatin remodeling, lineage commitment, pluripotency, tissue regeneration, and morphogenesis
An improved lumped element nonlinear circuit model for a circular CMUT cell
Cataloged from PDF version of article.This paper describes a correction and an extension in the previously published large signal equivalent circuit model for a circular capacitive micromachined ultrasonic transducer (CMUT) cell. The force model is rederived so that the energy and power is preserved in the equivalent circuit model. The model is able to predict the entire behavior of CMUT until the membrane touches the substrate. Many intrinsic properties of the CMUT cell, such as the collapse condition, collapse voltage, the voltage-displacement interrelation and the force equilibrium before and after collapse voltage in the presence of external static force, are obtained as a direct consequence of the model. The small signal equivalent circuit for any bias condition is obtained from the large signal model. The model can be implemented in circuit simulation tools and model predictions are in excellent agreement with finite element method simulations. © 2012 IEEE
Probing ultrafast energy transfer between excitons and plasmons in the ultrastrong coupling regime
Cataloged from PDF version of article.We investigate ultrafast energy transfer between excitons and plasmons in ensembles of core-shell type nanoparticles consisting of metal core covered with a concentric thin J-aggregate (JA) shell. The high electric field localization by the Ag nanoprisms and the high oscillator strength of the JAs allow us to probe this interaction in the ultrastrong plasmon-exciton coupling regime. Linear and nonlinear optical properties of the coupled system have been measured using transient absorption spectroscopy revealing that the hybrid system shows half-plasmonic and half-excitonic properties. The tunability of the nanoprism plasmon resonance provides a flexible platform to study the dynamics of the hybrid state in a broad range of wavelengths. (C) 2014 AIP Publishing LLC
Chemical and topographical modification of PHBV surface to promote osteoblast alignment and confinement
Proper cell attachment and distribution, and thus stronger association in vivo between a bone implant and native tissue will improve the success of the implant. In this study, the aim was to achieve promotion of attachment and uniform distribution of rat mesenchymal stem cell-derived osteoblasts by introducing chemical and topographical cues on poly(3-hydroxybutyrate-co-3- hydroxyvalerate) (PHBV) film surfaces. As the chemical cues, either alkaline phosphatase was covalently immobilized on the film surface to induce deposition of calcium phosphate minerals or fibrinogen was adsorbed to improve cell adhesion. Microgrooves and micropits were introduced on the film surface by negative replication of micropatterned Si wafers. Both chemical cues improved cell attachment and even distribution on the PHBV films, but Fb was more effective especially when combined with the micropatterns. Cell alignment (<10° deviation angle) parallel to chemically modified microgrooves (1, 3, or 8 μm groove width) and on 10 μm-thick Fb lines printed on the unpatterned films was achieved. The cells on unpatterned and 5 μm-deep micropitted films were distributed and oriented randomly. Results of this study proved that microtopographies on PHBV can improve osseointegration when combined with chemical cues, and that microgrooves and cell adhesive protein lines on PHBV can guide selective osteoblast adhesion and alignment. © 2007 Wiley Periodicals, Inc
Theoretical and Experimental Studies of Schottky Diodes That Use Aligned Arrays of Single Walled Carbon Nanotubes
We present theoretical and experimental studies of Schottky diodes that use
aligned arrays of single walled carbon nanotubes. A simple physical model,
taking into account the basic physics of current rectification, can adequately
describe the single-tube and array devices. We show that for as grown array
diodes, the rectification ratio, defined by the
maximum-to-minimum-current-ratio, is low due to the presence of m-SWNT shunts.
These tubes can be eliminated in a single voltage sweep resulting in a high
rectification array device. Further analysis also shows that the channel
resistance, and not the intrinsic nanotube diode properties, limits the
rectification in devices with channel length up to ten micrometer.Comment: Nano Research, 2010, accepte
- …