3,018 research outputs found
Energy efficient engine: Low-pressure turbine subsonic cascade component development and integration program
A subsonic cascade test program was conducted to provide technical data for optimizing the blade and vane airfoil designs for the Energy Efficient Engine Low-Pressure Turbine component. The program consisted of three parts. The first involved an evaluation of the low-chamber inlet guide vane. The second, was an evaluation of two candidate aerodynamic loading philosophies for the fourth blade root section. The third part consisted of an evaluation of three candidate airfoil geometries for the fourth blade mean section. The performance of each candidate airfoil was evaluated in a linear cascade configuration. The overall results of this study indicate that the aft-loaded airfoil designs resulted in lower losses which substantiated Pratt & Whitney Aircraft's design philosophy for the Energy Efficient Engine low-pressure turbine component
The regulatory use of the LD5O test in the light of scientific and animal welfare considerations
No abstract availabl
Miniature photonic-crystal hydrophone optimized for ocean acoustics
This work reports on an optical hydrophone that is insensitive to hydrostatic
pressure, yet capable of measuring acoustic pressures as low as the background
noise in the ocean in a frequency range of 1 Hz to 100 kHz. The miniature
hydrophone consists of a Fabry-Perot interferometer made of a photonic-crystal
reflector interrogated with a single-mode fiber, and is compatible with
existing fiber-optic technologies. Three sensors with different acoustic power
ranges placed within a sub-wavelength sized hydrophone head allow a high
dynamic range in the excess of 160 dB with a low harmonic distortion of better
than -30 dB. A method for suppressing cross coupling between sensors in the
same hydrophone head is also proposed. A prototype was fabricated, assembled,
and tested. The sensitivity was measured from 100 Hz to 100 kHz, demonstrating
a minimum detectable pressure down to 12 {\mu}Pa (1-Hz noise bandwidth), a
flatband wider than 10 kHz, and very low distortion
The orbifold cohomology of moduli of genus 3 curves
In this work we study the additive orbifold cohomology of the moduli stack of
smooth genus g curves. We show that this problem reduces to investigating the
rational cohomology of moduli spaces of cyclic covers of curves where the genus
of the covering curve is g. Then we work out the case of genus g=3.
Furthermore, we determine the part of the orbifold cohomology of the
Deligne-Mumford compactification of the moduli space of genus 3 curves that
comes from the Zariski closure of the inertia stack of M_3.Comment: 29 pages, 2 figures. Minor changes, to appear in Manuscripta Mat
Arctic sea level change over the past 2 decades from GRACE gradiometry and multi-mission satellite altimetry
Effect of laser structured micro patterns on the polyvinyl butyral/oxide/steel interface stability
This work investigated the effect of steel substrate topography and roughness on cathodic disbonding resistance and wet adhesion of the polyvinyl butyral/oxide/steel interface. Laser structuring was employed to pattern steel surfaces with controlled, periodic peaks of different peak-to-valley height, Rz, and geometry. Grinded smooth samples were used for reference. The in-situ scanning Kelvin probe technique was used to follow the cathodic disbonding in humid air and wet adhesion loss in inert atmosphere (3 ppm O). Both cathodic disbonding and wet adhesion loss depended on the ability of the surface for mechanical adhesion, even when compensating for the increased effective contact area. X-ray photoelectron spectroscopy excluded the possibility for oxide chemistry effects on the delamination rate. Surfaces with features that enabled mechanical interlocking forces, had the best cathodic disbonding resistance and wet adhesion properties
FabIO:easy access to two-dimensional X-ray detector images in Python
FabIO is a Python module written for easy and transparent reading of raw two-dimensional data from various X-ray detectors. The module provides a function for reading any image and returning a fabioimage object which contains both metadata (header information) and the raw data. All fabioimage objects offer additional methods to extract information about the image and to open other detector images from the same data series.</jats:p
Measuring subdiffusion parameters
We propose a method to extract from experimental data the subdiffusion
parameter and subdiffusion coefficient which are defined by
means of the relation where
denotes a mean square displacement of a random walker starting from
at the initial time . The method exploits a membrane system where a
substance of interest is transported in a solvent from one vessel to another
across a thin membrane which plays here only an auxiliary role. Using such a
system, we experimentally study a diffusion of glucose and sucrose in a gel
solvent. We find a fully analytic solution of the fractional subdiffusion
equation with the initial and boundary conditions representing the system under
study. Confronting the experimental data with the derived formulas, we show a
subdiffusive character of the sugar transport in gel solvent. We precisely
determine the parameter , which is smaller than 1, and the subdiffusion
coefficient .Comment: 17 pages, 9 figures, revised, to appear in Phys. Rev.
Oceanic Ambient Noise as a Background to Acoustic Neutrino Detection
Ambient noise measured in the deep ocean is studied in the context of a
search for signals from ultra-high energy cosmic ray neutrinos. The spectral
shape of the noise at the relevant high frequencies is found to be very stable
for an extensive data set collected over several months from 49 hydrophones
mounted near the bottom of the ocean at ~1600 m depth. The slopes of the
ambient noise spectra above 15 kHz are found to roll-off faster than the -6
dB/octave seen in Knudsen spectra. A model attributing the source to an uniform
distribution of surface noise that includes frequency-dependent absorption at
large depth is found to fit the data well up to 25 kHz. This depth dependent
model should therefore be used in analysis methods of acoustic neutrino pulse
detection that require the expected noise spectra.Comment: Minor changes. Submitted to PRD. 5 pages, 7 figure
- …