227 research outputs found
HyperCP: A high-rate spectrometer for the study of charged hyperon and kaon decays
The HyperCP experiment (Fermilab E871) was designed to search for rare
phenomena in the decays of charged strange particles, in particular CP
violation in and hyperon decays with a sensitivity of
. Intense charged secondary beams were produced by 800 GeV/c protons
and momentum-selected by a magnetic channel. Decay products were detected in a
large-acceptance, high-rate magnetic spectrometer using multiwire proportional
chambers, trigger hodoscopes, a hadronic calorimeter, and a muon-detection
system. Nearly identical acceptances and efficiencies for hyperons and
antihyperons decaying within an evacuated volume were achieved by reversing the
polarities of the channel and spectrometer magnets. A high-rate
data-acquisition system enabled 231 billion events to be recorded in twelve
months of data-taking.Comment: 107 pages, 45 Postscript figures, 14 tables, Elsevier LaTeX,
submitted to Nucl. Instrum. Meth.
An evolutionary stage model of outsourcing and competence destruction : a Triad comparison of the consumer electronics industry
Outsourcing has gained much prominence in managerial practice and academic discussions in the last two decades or so. Yet, we still do not understand the full implications of outsourcing strategy for corporate performance. Traditionally outsourcing across borders is explained as a cost-cutting exercise, but more recently the core competency argument states that outsourcing also leads to an increased focus, thereby improving effectiveness. However, no general explanation has so far been provided for how outsourcing could lead to deterioration in a firm‟s competence base. We longitudinally analyze three cases of major consumer electronics manufacturers, Emerson Radio from the U.S., Japan‟s Sony and Philips from the Netherlands to understand the dynamic process related to their sourcing strategies. We develop an evolutionary stage model that relates outsourcing to competence development inside the firm and shows that a vicious cycle may emerge. Thus it is appropriate to look not only at how outsourcing is influenced by an organization‟s current set of competences, but also how it alters that set over time. The four stages of the model are offshore sourcing, phasing out, increasing dependence on foreign suppliers, and finally industry exit or outsourcing reduction. The evolutionary stage model helps managers understand for which activities and under which conditions outsourcing across borders is not a viable option.
Results suggest that each of these firms had faced a loss of manufacturing competitiveness in its home country, to which it responded by offshoring and then outsourcing production. When a loss of competences occurred, some outsourcing decisions were reversed
The Japanese model in retrospective : industrial strategies, corporate Japan and the 'hollowing out' of Japanese industry
This article provides a retrospective look at the Japanese model of industrial development. This model combined an institutional approach to production based around the Japanese Firm (Aoki's, J-mode) and strategic state intervention in industry by the Japanese Ministry of International Trade and Industry (MITI). For a long period, the alignment of state and corporate interests appeared to match the wider public interest as the Japanese economy prospered. However, since the early 1990s, the global ambitions of the corporate sector have contributed to a significant 'hollowing out' of Japan's industrial base. As the world today looks for a new direction in economic management, we suggest the Japanese model provides policy-makers with a salutary lesson in tying the wider public interest with those of the corporate sector
Manufacturing process for high aspect ratio metallic micro parts made by electroplating on partially conductive templates
Extended Abstract In supporting structural integrity of a miniature component, or for providing electric conduction of a through-silicon via (TSV) in three-dimensional integrated circuits (3D-IC), micro-or nano-hole filling with metallic material becomes increasing important in various micro-electrical mechanical systems (MEMSs) In this study, an anodic aluminum oxide (AAO) template containing numerous high aspect ratio nano-sized holes (an average diameter of 130 nm and an aspect-ratio about 20) was used as the cathode. The hydrophobicity/hydrophilicity of the AAO template was adjusted before Cu electrodeposition. Electrodeposition of Cu was carried out in an emulsified sc-CO2 bath containing cupric sulfate aqueous solution as the precursor. Cu deposition into the nano-holes was performed at an apparent constant current density of 2 A/dm 2 for 5 minutes. After electrodeposition, the cross section morphology and chemical composition of the AAO cathode was examined by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) with the aid of a focused-ion-beam (FIB). The experimental results showed that electrodeposition employing sc-CO2 bath to fill Cu into nano-sized holes was successful and superior to that of conventional process carried out at ambient pressure, in terms of uniformity and deposition rate. The high solubility of hydrogen gas in sc-CO2 fluid is the key factor. Moreover, the advantage of sc-CO2 electrodeposition is more pronounced for the AAO cathode exhibiting hydrophobic nature with respect to aqueous bath. References [1] Z
Bright green light treatment of depression for older adults [ISRCTN69400161]
BACKGROUND: Bright white light has been successfully used for the treatment of depression. There is interest in identifying which spectral colors of light are the most efficient in the treatment of depression. It is theorized that green light could decrease the intensity duration of exposure needed. Late Wake Treatment (LWT), sleep deprivation for the last half of one night, is associated with rapid mood improvement which has been sustained by light treatment. Because spectral responsiveness may differ by age, we examined whether green light would provide efficient antidepressant treatment in an elder age group. METHODS: We contrasted one hour of bright green light (1,200 Lux) and one hour of dim red light placebo (<10 Lux) in a randomized treatment trial with depressed elders. Participants were observed in their homes with mood scales, wrist actigraphy and light monitoring. On the day prior to beginning treatment, the participants self-administered LWT. RESULTS: The protocol was completed by 33 subjects who were 59 to 80 years old. Mood improved on average 23% for all subjects, but there were no significant statistical differences between treatment and placebo groups. There were negligible adverse reactions to the bright green light, which was well tolerated. CONCLUSION: Bright green light was not shown to have an antidepressant effect in the age group of this study, but a larger trial with brighter green light might be of value
Heterogeneous 2.5D integration on through silicon interposer
© 2015 AIP Publishing LLC. Driven by the need to reduce the power consumption of mobile devices, and servers/data centers, and yet continue to deliver improved performance and experience by the end consumer of digital data, the semiconductor industry is looking for new technologies for manufacturing integrated circuits (ICs). In this quest, power consumed in transferring data over copper interconnects is a sizeable portion that needs to be addressed now and continuing over the next few decades. 2.5D Through-Si-Interposer (TSI) is a strong candidate to deliver improved performance while consuming lower power than in previous generations of servers/data centers and mobile devices. These low-power/high-performance advantages are realized through achievement of high interconnect densities on the TSI (higher than ever seen on Printed Circuit Boards (PCBs) or organic substrates), and enabling heterogeneous integration on the TSI platform where individual ICs are assembled at close proximity
Testing Meson Portal Dark Sector Solutions to the MiniBooNE Anomaly at CCM
A solution to the MiniBooNE excess invoking rare three-body decays of the
charged pions and kaons to new states in the MeV mass scale was recently
proposed as a dark-sector explanation. This class of solution illuminates the
fact that, while the charged pions were focused in the target-mode run, their
decay products were isotropically suppressed in the beam-dump-mode run in which
no excess was observed. This suggests a new physics solution correlated to the
mesonic sector. We investigate an extended set of phenomenological models that
can explain the MiniBooNE excess as a dark sector solution, utilizing
long-lived particles that might be produced in the three-body decays of the
charged mesons and the two-body anomalous decays of the neutral mesons. Over a
broad set of interactions with the long-lived particles, we show that these
scenarios can be compatible with constraints from LSND, KARMEN, and MicroBooNE,
and evaluate the sensitivity of the ongoing and future data taken by the
Coherent CAPTAIN Mills experiment (CCM) to a potential discovery in this
parameter space.Comment: 15 pages, 14 figures. Planned submission for PR
Composition of the Top Management Team and Firm International Diversification
This study investigates the impact of various top management team characteristics on firm international diversification. Relying on data from 126 firms in the electronics industry, we find that certain top management team characteristics are related to international expansion. Specifically, results indicate that lower average age, higher average tenure, higher average elite education, higher average international experience, and higher tenure heterogeneity are associated with firm international diversification. The study reinforces the importance of top management team composition in internationalization decisions and suggests further research in this context.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline
- …