Assessment of deep cryogenic heat-treatment impact on the microstructure and surface chemistry of austenitic stainless steel

This systematic study deals with the influence of deep cryogenic treatment (DCT) on microstructure and surface properties of austenitic stainless steel AISI 304 L on different length scales and in the surface region. The study incorporates different analysis techniques, such as light microscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), electron backscatter diffraction (EBSD), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ions mass spectrometry (ToF-SIMS). DCT modifies the microstructure of treated samples through promoted precipitation of Cr7C3 carbides, induced twinning and α-martensite formation. Additionally, XPS/AR-XPS and ToF-SIMS results also provide evidence of modified oxidation dynamics of DCT samples compared to conventionally heat-treated samples with increase of the Fe-oxide fraction and lower Cr-oxide fraction in the surface oxide layer. An evaluation of oxidation states and ions distribution within the surface layer of deep cryogenically heat-treated stainless steel AISI 304 L is conducted with XPS/ToF-SIMS. These results are correlated with the microstructural changes and nitrogen diffusivity induced by DCT, which are associated with modified oxidation behaviour of AISI 304 L. These results provide further understanding of DCT dynamic on the overall microstructure and the corresponding surface behaviour

Sulfur reduction in sediments of marine and evaporite environments

Transformations of sulfur in sediments of ponds ranging in salinities from that of normal seawater to those of brines saturated with sodium chloride were examined. The chemistry of the sediment and pore waters were focused on with emphasis on the fate of sulfate reduction. The effects of increasing salinity on both forms of sulfur and microbial activity were determined. A unique set of chemical profiles and sulfate-reducing activity was found for the sediments of each of the sites examined. The quantity of organic matter in the salt pond sediments was significantly greater than that occurring in the adjacent intertidal site. The total quantitative and qualitative distribution of volatile fatty acids was also greater in the salt ponds. Volatile fatty acids increased with salinity

Constraints, Histones, and the 30 Nanometer Spiral

We investigate the mechanical stability of a segment of DNA wrapped around a histone in the nucleosome configuration. The assumption underlying this investigation is that the proper model for this packaging arrangement is that of an elastic rod that is free to twist and that writhes subject to mechanical constraints. We find that the number of constraints required to stabilize the nuclesome configuration is determined by the length of the segment, the number of times the DNA wraps around the histone spool, and the specific constraints utilized. While it can be shown that four constraints suffice, in principle, to insure stability of the nucleosome, a proper choice must be made to guarantee the effectiveness of this minimal number. The optimal choice of constraints appears to bear a relation to the existence of a spiral ridge on the surface of the histone octamer. The particular configuration that we investigate is related to the 30 nanometer spiral, a higher-order organization of DNA in chromatin.Comment: ReVTeX, 15 pages, 18 figure

Understanding carbide evolution and surface chemistry during deep cryogenic treatment in high-alloyed ferrous alloy

The study investigates the effect of deep cryogenic treatment (DCT) on a high-alloyed ferrous alloy (HAFA) and its effectiveness on carbide evolution and chemical shifts of alloying elements. With ex-situ and in-situ observations ranging from the microscopic to the nanoscopic level, we uncover the atomistic mechanism by which DCT affects carbide precipitation, resulting in a 50% increase in carbide volume fraction. Synchrotron-based scanning photoelectron microscopy provides insight into the agglomeration of carbon during exposure to DCT. We find that Mo plays a crucial role in DCT through its modification of chemical bonding states, which is postulated to originate from the loosely-formed primordial Mo2C carbides formed during exposure to cryogenic temperatures. These in turn provide energetically favorable nucleation zones that accelerate the formation of M7C3 carbides, which serve as intermediate states for the formation of M23C6 carbides, which most strongly impact the mechanical properties. These results are supported by atom probe tomography, showing the preferential formation of Mo-rich M7C3 carbides in DCT samples, resulting from greater solute mobility. This work clarifies the fundamental mechanisms on how DCT affects HAFA, solving a long-elusive problem

Macro- and micro-strain in GaN nanowires on Si(111)

We analyze the strain state of GaN nanowire ensembles by x-ray diffraction. The nanowires are grown by molecular beam epitaxy on a Si(111) substrate in a self-organized manner. On a macroscopic scale, the nanowires are found to be free of strain. However, coalescence of the nanowires results in micro-strain with a magnitude from +-0.015% to +-0.03%.This micro-strain contributes to the linewidth observed in low-temperature photoluminescence spectra

Local Stabilization of Time-Delay Nonlinear Discrete-Time Systems Using Takagi-Sugeno Models and Convex Optimization

A convex condition in terms of linear matrix inequalities (LMIs) is developed for the synthesis of stabilizing fuzzy state feedback controllers for nonlinear discrete-time systems with time-varying delays. A Takagi-Sugeno (T-S) fuzzy model is used to represent exactly the nonlinear system in a restricted domain of the state space, called region of validity. The proposed stabilization condition is based on a Lyapunov-Krasovskii (L-K) function and it takes into account the region of validity to determine a set of initial conditions for which the actual closed-loop system trajectories are asymptotically stable and do not evolve outside the region of validity. This set of allowable initial conditions is determined from the level set associated to a fuzzy L-K function as a Cartesian product of two subsets: one characterizing the set of states at the initial instant and another for the delayed state sequence necessary to characterize the initial conditions. Finally, we propose a convex programming problem to design a fuzzy controller that maximizes the set of initial conditions taking into account the shape of the region of validity of the T-S fuzzy model. Numerical simulations are given to illustrate this proposal

An approach to the use of hydrogen for commercial aircraft engines

This paper presents some results on the performance of hydrogen-based engines. In particular, the following aspects are addressed: benefits associated with specific fuel and energy consumption, net thrust, turbine entry temperature, and hardware changes needed in the upgrading process from kerosene to hydrogen. Hydrogen is a high-energy clean-burning fuel whose main combustion product is water vapour plus traces of nitrogen oxides. This fact suggests that, provided that the technology is available, the use of hydrogen could offer some opportunities for the environmentally friendly development and sustained growth of commercial aviation. The study has been performed in the frame of the Liquid Hydrogen Fuelled Aircraft – System Analysis (CRYOPLANE) project. This is a Fifth Framework Programme, supported by the European Commission, whose objective was to assess the feasibility of using hydrogen as a clean energy source for air transportation systems

Electron beam computed tomography (EBCT) funding protocol

No Abstrac

Light-ion production in the interaction of 96 MeV neutrons with oxygen

Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in oxygen, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential and production cross sections are reported. Experimental cross sections are compared to theoretical reaction model calculations and experimental data at lower neutron energies in the literature. The measured proton data agree reasonably well with the results of the model calculations, whereas the agreement for the other particles is less convincing. The measured production cross sections for protons, deuterons, tritons and alpha particles support the trends suggested by data at lower energies.Comment: 21 pages, 13 figures, submitted to Phys. Rev.