Ni-MH storage test and cycle life test

Gates Aerospace Batteries is conducting two long term test programs to fully characterize the NiMH cell technology for aerospace applications. The first program analyzes the effects of long term storage upon cell performance. The second program analyzes cycle life testing and preliminary production lot testing. This paper summarizes these approaches to testing the NiMH couple and culminates with initial storage and testing recommendations. Long term storage presents challenges to deter the adverse condition of capacity fade in NiMH cells. Elevated but stabilized pressures and elevated but stabilized end-of-charge voltages also appear to be a characteristic phenomenon of long term storage modes. However, the performance degradation is dependent upon specific characteristics of the metal-hydride alloy. To date, there is no objective evidence with which to recommend the proper method for storage and handling of NiMH cells upon shipment. This is particularly critical due to limited data points that indicate open circuit storage at room temperature for 60 to 90 days will result in irrecoverable capacity loss. Accordingly a test plan was developed to determine what method of mid-term to long-term storage will prevent irrecoverable capacity loss. The explicit assumption is that trickle charging at some rate above the self-discharge rate will prevent the irreversible chemical changes to the negative electrode that result in the irrecoverable capacity loss. Another premise is that lower storage temperatures, typically 0 C for aerospace customers, will impede any negative chemical reactions. Three different trickle charge rates are expected to yield a fairly flat response with respect to recoverable capacity versus baseline cells in two different modes of open circuit. Specific attributes monitored include: end-of-charge voltage, end-of-charge pressure, mid-point discharge voltage, capacity, and end-of-discharge pressure. Cycle life testing and preliminary production lot testing continue to dominate the overall technology development effort at GAB. The cell life test program reflects continuing improvements in baseline cell designs. Performance improvements include lower and more stable charge voltages and pressures. The continuing review of production lot testing assures conformance to the design criteria and expectations. This is especially critical during this period of transferring technology from research and development status to production

A two-way coupling for modeling thermoacoustic instabilities in a flat flame Rijke tube

Thermoacoustic instabilities are a serious problem for lean premixed combustion systems. Due to different time and length scales associated with the flow field, combustion, and acoustics, numerical computations of thermoacoustic phenomena are conceptually challenging. This work presents a coupled method for the simulation of thermoacoustic instabilities in low Mach number reacting flows. The acoustics are represented by a reduced order model that can be obtained from network techniques or finite element computations. A detailed chemistry finite-difference zero Mach number solver is used for the small scale flame dynamics. Under the assumption that the pressure is continuous across the flame, the acoustic model can be reduced to a time-domain relation mapping the velocity perturbation downstream of the flame to that upstream. Closure is obtained by the flame code, which delivers the jump in velocity across the combustion zone. The method is applied to an experimental laminar premixed burner-stabilized flat flame Rijke tube, that exhibits strong thermoacoustic oscillations associated with the 5k=4 mode of the geometrical set-up. In addition to the fundamental oscillation, a significant subharmonic response of the flame is observed. Results from the coupled simulation are compared to the experimental data. Good qualitative and quantitative agreement is found

A quasi-Lagrangian coordinate system based on high resolution tracer observations: implementation for the Antarctic polar vortex

In order to quantitatively analyse the chemical and dynamical evolution of the polar vortex it has proven extremely useful to work with coordinate systems that follow the vortex flow. We propose here a two-dimensional quasi-Lagrangian coordinate system {X i, delta X i}, based on the mixing ratio of a long-lived stratospheric trace gas i, and its systematic use with i = N2O, in order to describe the structure of a well-developed Antarctic polar vortex. In the coordinate system {X i, delta X i} the mixing ratio X i is the vertical coordinate and delta X i = X i(theta) - X i vort(theta) is the meridional coordinate (X i vort(theta) being a vertical reference profile in the vortex core). The quasi-Lagrangian coordinates {X i, delta X i} persist for much longer time than standard isentropic coordinates, potential temperature theta and equivalent latitude Phi e, do not require explicit reference to geographic space, and can be derived directly from high-resolution in situ measurements. They are therefore well-suited for studying the evolution of the Antarctic polar vortex throughout the polar winter with respect to the relevant chemical and microphysical processes. By using the introduced coordinate system {X N2O, delta X N2O} we analyze the well-developed Antarctic vortex investigated during the APE-GAIA (Airborne Polar Experiment – Geophysica Aircraft in Antarctica – 1999) campaign (Carli et al., 2000). A criterion, which uses the local in-situ measurements of X i=X i(theta) and attributes the inner vortex edge to a rapid change (delta-step) in the meridional profile of the mixing ratio X i, is developed to determine the (Antarctic) inner vortex edge. In turn, we suggest that the outer vortex edge of a well-developed Antarctic vortex can be attributed to the position of a local minimum of the X H2O gradient in the polar vortex area. For a well-developed Antarctic vortex, the delta X N2O-parametrization of tracer-tracer relationships allows to distinguish the tracer inter-relationships in the vortex core, vortex boundary region and surf zone and to examine their meridional variation throughout these regions. This is illustrated by analyzing the tracer-tracer relationships X i : X N2O obtained from the in-situ data of the APE-GAIA campaign for i = CFC-11, CFC-12, H-1211 and SF6. A number of solitary anomalous points in the CFC-11 : N2O correlation, observed in the Antarctic vortex core, are interpreted in terms of small-scale cross-isentropic dispersion

Sequential conformational rearrangements in flavivirus membrane fusion

The West Nile Virus (WNV) envelope protein, E, promotes membrane fusion during viral cell entry by undergoing a low-pH triggered conformational reorganization. We have examined the mechanism of WNV fusion and sought evidence for potential intermediates during the conformational transition by following hemifusion of WNV virus-like particles (VLPs) in a single particle format. We have introduced specific mutations into E, to relate their influence on fusion kinetics to structural features of the protein. At the level of individual E subunits, trimer formation and membrane engagement of the threefold clustered fusion loops are rate-limiting. Hemifusion requires at least two adjacent trimers. Simulation of the kinetics indicates that availability of competent monomers within the contact zone between virus and target membrane makes trimerization a bottleneck in hemifusion. We discuss the implications of the model we have derived for mechanisms of membrane fusion in other contexts. DOI: http://dx.doi.org/10.7554/eLife.04389.00

Characterization of a ballistic supermirror neutron guide

We describe the beam characteristics of the first ballistic supermirror neutron guide H113 that feeds the neutron user facility for particle physics PF1B of the Institute Laue-Langevin, Grenoble (ILL). At present, the neutron capture flux density of H113 at its 20x6cm2 exit window is 1.35x10^10/cm^2/s, and will soon be raised to above 2x10^10/cm^2/s. Beam divergence is no larger than beam divergence from a conventional Ni coated guide. A model is developed that permits rapid calculation of beam profiles and absolute event rates from such a beam. We propose a procedure that permits inter-comparability of the main features of beams emitted from ballistic or conventional neutron guides.Comment: 15 pages, 11 figures, to be submitted to Nuclear Instruments and Methods

Back-Reaction In Lightcone QED

We consider the back-reaction of quantum electrodynamics upon an electric field E(x_+) = - A'_-(x_+) which is parallel to x^3 and depends only on the lightcone coordinate x_+ = (x^0 + x^3)/\sqrt{2}. Novel features are that the mode functions have simple expressions for arbitrary A_-(x_+), and that one cannot ignore the usual lightcone ambiguity at zero + momentum. Each mode of definite canonical momenta k_+ experiences pair creation at the instant when its kinetic momentum p_+=k_+ - e A_-(x_+) vanishes, at which point operators from the surface at x_- =-\infty play a crucial role. Our formalism permits a more explicit and complete derivation of the rate of particle production than is usually given. We show that the system can be understood as the infinite boost limit of the analogous problem of an electric field which is homogeneous on surfaces of constant x^0.Comment: 37 pages, 2 figures, LaTeX 2 epsilo

Exact Criterion for Determining Clustering vs. Reentrant Melting Behavior for Bounded Interaction Potentials

We examine in full generality the phase behavior of systems whose constituent particles interact by means of potentials which do not diverge at the origin, are free of attractive parts and decay fast enough to zero as the interparticle separation r goes to infinity. By employing a mean field-density functional theory which is shown to become exact at high temperatures and/or densities, we establish a criterion which determines whether a given system will freeze at all temperatures or it will display reentrant melting and an upper freezing temperature.Comment: 5 pages, 3 figures, submitted to PRL on March 29, 2000 New version: 10 pages, 9 figures, forwarded to PRE on October 16, 200

Informatização do Processo de Trâmite de Publicações - InfoCLP.

Projeto/Plano de Ação: 11.11.11.111

Elastic Constants of Quantum Solids by Path Integral Simulations

Two methods are proposed to evaluate the second-order elastic constants of quantum mechanically treated solids. One method is based on path-integral simulations in the (NVT) ensemble using an estimator for elastic constants. The other method is based on simulations in the (NpT) ensemble exploiting the relationship between strain fluctuations and elastic constants. The strengths and weaknesses of the methods are discussed thoroughly. We show how one can reduce statistical and systematic errors associated with so-called primitive estimators. The methods are then applied to solid argon at atmospheric pressures and solid helium 3 (hcp, fcc, and bcc) under varying pressures. Good agreement with available experimental data on elastic constants is found for helium 3. Predictions are made for the thermal expectation value of the kinetic energy of solid helium 3.Comment: 9 pages doublecolumn, 6 figures, submitted to PR