63 research outputs found
Carbon-nitrogen interactions in European forests and semi-natural vegetation - Part 2: Untangling climatic, edaphic, management and nitrogen deposition effects on carbon sequestration potentials
The effects of atmospheric nitrogen deposition (N) on carbon (C) sequestration in forests have often been assessed by relating differences in productivity to spatial variations of N across a large geographic domain. These correlations generally suffer from covariation of other confounding variables related to climate and other growth-limiting factors, as well as large uncertainties in total (dry+wet) reactive nitrogen (N) deposition.We propose a methodology for untangling the effects of N from those of meteorological variables, soil water retention capacity and stand age, using a mechanistic forest growth model in combination with eddy covariance CO exchange fluxes from a Europe-wide network of 22 forest flux towers. Total N deposition rates were estimated from local measurements as far as possible. The forest data were compared with data from natural or semi-natural, non-woody vegetation sites. The response of forest net ecosystem productivity to nitrogen deposition (dNEP= dN) was estimated after accounting for the effects on gross primary productivity (GPP) of the co-correlates by means of a meta-modelling standardization procedure, which resulted in a reduction by a factor of about 2 of the uncorrected, apparent dGPP/dN value. This model-enhanced analysis of the C and N flux observations at the scale of the European network suggests a mean overall dNEP/dN response of forest lifetime C sequestration to N of the order of 40–50 g C per g N, which is slightly larger but not significantly different from the range of estimates published in the most recent reviews. Importantly, patterns of gross primary and net ecosystem productivity versus N were non-linear, with no further growth responses at high N levels (N >2.5–3 gNm yr) but accompanied by increasingly large ecosystem N losses by leaching and gaseous emissions. The reduced increase in productivity per unit N deposited at high N levels implies that the forecast increased N emissions and increased Ndep levels in large areas of Asia may not positively impact the continent’s forest CO sink. The large level of unexplained variability in observed carbon sequestration efficiency (CSE) across sites further adds to the uncertainty in the dC/dN response
Carbon-nitrogen interactions in European forests and semi-natural vegetation - Part 1: Fluxes and budgets of carbon, nitrogen and greenhouse gases from ecosystem monitoring and modelling
The impact of atmospheric reactive nitrogen (N) deposition on carbon (C) sequestration in soils and biomass of unfertilized, natural, semi-natural and forest ecosystems has been much debated. Many previous results of this dC/dN response were based on changes in carbon stocks from periodical soil and ecosystem inventories, associated with estimates of N deposition obtained from large-scale chemical transport models. This study and a companion paper (Flechard et al., 2020) strive to reduce uncertainties of N effects on C sequestration by linking multi-annual gross and net ecosystem productivity estimates from 40 eddy covariance flux towers across Europe to local measurement-based estimates of dry and wet N deposition from a dedicated collocated monitoring network. To identify possible ecological drivers and processes affecting the interplay between C and N inputs and losses, these data were also combined with in situ flux measurements of NO, NO and CH fluxes; soil NO̅ leaching sampling; and results of soil incubation experiments for N and greenhouse gas (GHG) emissions, as well as surveys of available data from online databases and from the literature, together with forest ecosystem (BASFOR) modelling. Multi-year averages of net ecosystem productivity (NEP) in forests ranged from -70 to 826 gCm yr at total wet+dry inorganic N deposition rates (N) of 0.3 to 4.3 gNm yr and from -4 to 361 g Cm yr at N rates of 0.1 to 3.1 gNm yr in short semi-natural vegetation (moorlands, wetlands and unfertilized extensively managed grasslands). The GHG budgets of the forests were strongly dominated by CO exchange, while CH and NO exchange comprised a larger proportion of the GHG balance in short semi-natural vegetation. Uncertainties in elemental budgets were much larger for nitrogen than carbon, especially at sites with elevated N where N leaching losses were also very large, and compounded by the lack of reliable data on organic nitrogen and N losses by denitrification. Nitrogen losses in the form of NO, NO and especially NO̅ were on average 27%(range 6 %–54 %) of N at sites with N 3 gNm yr. Such large levels of N loss likely indicate that different stages of N saturation occurred at a number of sites. The joint analysis of the C and N budgets provided further hints that N saturation could be detected in altered patterns of forest growth. Net ecosystem productivity increased with N deposition up to 2–2.5 gNm yr, with large scatter associated with a wide range in carbon sequestration efficiency (CSE, defined as the NEP = GPP ratio). At elevated N levels (> 2.5 gNm yr), where inorganic N losses were also increasingly large, NEP levelled off and then decreased. The apparent increase in NEP at low to intermediate N levels was partly the result of geographical cross-correlations between N and climate, indicating that the actual mean dC/dN response at individual sites was significantly lower than would be suggested by a simple, straightforward regression of NEP vs. N
Author Correction: Open-access quantitative MRI data of the spinal cord and reproducibility across participants, sites and manufacturers
Generic acquisition protocol for quantitative MRI of the spinal cord
Quantitative spinal cord (SC) magnetic resonance imaging (MRI) presents many challenges, including a lack of standardized imaging protocols. Here we present a prospectively harmonized quantitative MRI protocol, which we refer to as the spine generic protocol, for users of 3T MRI systems from the three main manufacturers: GE, Philips and Siemens. The protocol provides guidance for assessing SC macrostructural and microstructural integrity: T1-weighted and T2-weighted imaging for SC cross-sectional area computation, multi-echo gradient echo for gray matter cross-sectional area, and magnetization transfer and diffusion weighted imaging for assessing white matter microstructure. In a companion paper from the same authors, the spine generic protocol was used to acquire data across 42 centers in 260 healthy subjects. The key details of the spine generic protocol are also available in an open-access document that can be found at https://github.com/spine-generic/protocols. The protocol will serve as a starting point for researchers and clinicians implementing new SC imaging initiatives so that, in the future, inclusion of the SC in neuroimaging protocols will be more common. The protocol could be implemented by any trained MR technician or by a researcher/clinician familiar with MRI acquisition
Technische Zusammenfassung
Die Technische Zusammenfassung des APCC-Sonderberichts ″Landnutzung und Klimawandel in Österreich″ umfasst die Kernbotschaften der Kapitel 1–9. In ihr sind die Hauptaussagen zu den sozioökonomischen und klimatischen Treibern der Landnutzungsänderungen, zu den Auswirkungen von Landnutzung und -bewirtschaftung auf den Klimawandel, zu Minderungs- und Anpassungsoptionen im Kontext nachhaltiger Entwicklungsziele sowie zu Synergien, Zielkonflikten und Umsetzungsbarrieren von Klimamaßnahmen enthalten
Open-access quantitative MRI data of the spinal cord and reproducibility across participants, sites and manufacturers
In a companion paper by Cohen-Adad et al. we introduce the spine generic quantitative MRI protocol that provides valuable metrics for assessing spinal cord macrostructural and microstructural integrity. This protocol was used to acquire a single subject dataset across 19 centers and a multi-subject dataset across 42 centers (for a total of 260 participants), spanning the three main MRI manufacturers: GE, Philips and Siemens. Both datasets are publicly available via git-annex. Data were analysed using the Spinal Cord Toolbox to produce normative values as well as inter/intra-site and inter/intra-manufacturer statistics. Reproducibility for the spine generic protocol was high across sites and manufacturers, with an average inter-site coefficient of variation of less than 5% for all the metrics. Full documentation and results can be found at https://spine-generic.rtfd.io/. The datasets and analysis pipeline will help pave the way towards accessible and reproducible quantitative MRI in the spinal cord
Generic acquisition protocol for quantitative MRI of the spinal cord
Quantitative spinal cord (SC) magnetic resonance imaging (MRI) presents many challenges, including a lack of standardized imaging protocols. Here we present a prospectively harmonized quantitative MRI protocol, which we refer to as the spine generic protocol, for users of 3T MRI systems from the three main manufacturers: GE, Philips and Siemens. The protocol provides guidance for assessing SC macrostructural and microstructural integrity: T1-weighted and T2-weighted imaging for SC cross-sectional area computation, multi-echo gradient echo for gray matter cross-sectional area, and magnetization transfer and diffusion weighted imaging for assessing white matter microstructure. In a companion paper from the same authors, the spine generic protocol was used to acquire data across 42 centers in 260 healthy subjects. The key details of the spine generic protocol are also available in an open-access document that can be found at https://github.com/spine-generic/protocols. The protocol will serve as a starting point for researchers and clinicians implementing new SC imaging initiatives so that, in the future, inclusion of the SC in neuroimaging protocols will be more common. The protocol could be implemented by any trained MR technician or by a researcher/clinician familiar with MRI acquisition
Comparing MRI metrics to quantify white matter microstructural damage in multiple sclerosis
Quantifying white matter damage in vivo is becoming increasingly important for investigating the effects of neuroprotective and repair strategies in multiple sclerosis (MS). While various approaches are available, the relationship between MRI‐based metrics of white matter microstructure in the disease, that is, to what extent the metrics provide complementary versus redundant information, remains largely unexplored. We obtained four microstructural metrics from 123 MS patients: fractional anisotropy (FA), radial diffusivity (RD), myelin water fraction (MWF), and magnetisation transfer ratio (MTR). Coregistration of maps of these four indices allowed quantification of microstructural damage through voxel‐wise damage scores relative to healthy tissue, as assessed in a group of 27 controls. We considered three white matter tissue‐states, which were expected to vary in microstructural damage: normal appearing white matter (NAWM), T2‐weighted hyperintense lesional tissue without T1‐weighted hypointensity (T2L), and T1‐weighted hypointense lesional tissue with corresponding T2‐weighted hyperintensity (T1L). All MRI indices suggested significant damage in all three tissue‐states, the greatest damage being in T1L. The correlations between indices ranged from r = 0.18 to r = 0.87. MWF was most sensitive when differentiating T2L from NAWM, while MTR was most sensitive when differentiating T1L from NAWM and from T2L. Combining the four metrics into one, through a principal component analysis, did not yield a measure more sensitive to damage than any single measure. Our findings suggest that the metrics are (at least partially) correlated with each other, but sensitive to the different aspects of pathology. Leveraging these differences could be beneficial in clinical trials testing the effects of therapeutic interventions
Continuous-wave ultraviolet Ce:LiCAF laser
We report a first demonstration and characterization of a 289.9 nm continuouswave (cw) Ce:LiCAF laser pumped by a cw 266 nm laser. This direct-UV laser has the potential to be tuned from 285-315 nm, and to generate few-fs pulses.3 page(s
- …