209 research outputs found
Correlations between deposition parameters and structural and electrical properties of YBa2Cu3O7âdelta thin films grown in situ by sequential ion beam sputtering
We have studied the correlations between deposition parameters and structural and electrical properties of YBa2Cu3O7âdelta thin films grown in situ by sequential ion beam sputtering. Epitaxial, c-axis oriented YBa2Cu3O7âdelta films were grown both on (100) SrTiO3 and on (100) MgO substrates following the stacking sequence of the ``123'' compound, with deposited layer thicknesses nominally equal to 1 monolayer. The c-axis lattice parameters obtained were larger than the corresponding lattice parameter in bulk samples, even after low-temperature anneals in O2. The transition temperatures were found to decrease with the enlargement of the c-axis lattice parameter. A clear correlation between growth temperature and the value of the c-axis lattice parameter was observed. The c-axis lattice parameter and the x-ray linewidth of Bragg reflections with the G vector along the c-axis were also found to be correlated. This suggests a relationship between the c-axis lattice parameter and the structural coherence of the epitaxial films
Effect of medial patellofemoral ligament reconstruction method on patellofemoral contact pressures and kinematics.
Background: There remains a lack of evidence regarding the optimal method when reconstructing the medial patellofemoral ligament (MPFL) and whether some graft constructs can be more forgiving to surgical errors, such as overtensioning or tunnel malpositioning, than others. Hypothesis: The null hypothesis was that there would not be a significant difference between reconstruction methods (eg, graft type and fixation) in the adverse biomechanical effects (eg, patellar maltracking or elevated articular contact pressure) resulting from surgical errors such as tunnel malpositioning or graft overtensioning. Study Design: Controlled laboratory study. Methods: Nine fresh-frozen cadaveric knees were placed on a customized testing rig, where the femur was fixed but the tibia could be moved freely from 0\ub0 to 90\ub0 of flexion. Individual quadriceps heads and the iliotibial tract were separated and loaded to 205 N of tension using a weighted pulley system. Patellofemoral contact pressures and patellar tracking were measured at 0\ub0, 10\ub0, 20\ub0, 30\ub0, 60\ub0, and 90\ub0 of flexion using pressure-sensitive film inserted between the patella and trochlea, in conjunction with an optical tracking system. The MPFL was transected and then reconstructed in a randomized order using a (1) double-strand gracilis tendon, (2) quadriceps tendon, and (3) tensor fasciae latae allograft. Pressure maps and tracking measurements were recorded for each reconstruction method in 2 N and 10 N of tension and with the graft positioned in the anatomic, proximal, and distal femoral tunnel positions. Statistical analysis was undertaken using repeated-measures analyses of variance, Bonferroni post hoc analyses, and paired t tests. Results: Anatomically placed grafts during MPFL reconstruction tensioned to 2 N resulted in the restoration of intact medial joint contact pressures and patellar tracking for all 3 graft types investigated (P >.050). However, femoral tunnels positioned proximal or distal to the anatomic origin resulted in significant increases in the mean medial joint contact pressure, medial patellar tilt, and medial patellar translation during knee flexion or extension, respectively (P <.050), regardless of graft type, as did tensioning to 10 N. Conclusion: The importance of the surgical technique, specifically correct femoral tunnel positioning and graft tensioning, in restoring normal patellofemoral joint (PFJ) kinematics and articular cartilage contact stresses is evident, and the type of MPFL graft appeared less important. Clinical Relevance: The correct femoral tunnel position and graft tension for restoring normal PFJ kinematics and articular cartilage contact stresses appear to be more important than graft selection during MPFL reconstruction. These findings emphasize the importance of the surgical technique when undertaking this procedure
Yersinia pseudotuberculosis serotype O : 1 infection in a captive Seba's short tailed-fruit bat (Carollia perspicillata) colony in Switzerland
BackgroundBetween February and April 2016, a slight increase in mortality was observed in a colony consisting of 400 captive Seba's short-tailed bats (Carollia perspicillata). These animals cohabited with other nocturnal animal species in a dome of a private zoo in Switzerland.ResultsGross and histological analysis of two (14.3%) out of the 13 animals submitted for necropsy within this period revealed a necrosuppurative pneumonia, hepatitis, splenitis, enterocolitis, and endometritis, with abundant intralesional colonies of Gram-negative rods. Yersinia (Y.) pseudotuberculosis serotype O:1 and biotype 1 belonging to the sequence type ST90 was isolated from the affected organs in both animals. Following this diagnosis, 1/4 of the colony (99 animals) was culled and submitted for gross and histopathological analysis, and a bacterial culture selective for Yersinia spp. of lung, liver, and spleen was performed. From these 99 animals, one gravid female was tested and found to be positive for Y. pseudotuberculosis in the absence of clinical symptoms and histopathological lesions. PCR analysis of altogether three bacterial isolates for virulence factors revealed the presence of the ail gene, and one isolate was also positive for the virF and yadA plasmid genes.ConclusionsThese findings suggest that Carollia perspicillata are susceptible to lethal yersiniosis but do not represent a regular reservoir for Y. pseudotuberculosis. Culling of 1/4 of the population was sufficient to limit the spread of this infection among the colony. Moreover, no infections were detected in cohabitant nocturnal animals and caretakers, indicating that the zoonotic risk in this case was low.Peer reviewe
Simple and efficient expression of Agaricus meleagris pyranose dehydrogenase in Pichia pastoris
Pyranose dehydrogenase (PDH) is a fungal flavin-dependent sugar oxidoreductase that is highly interesting for applications in organic synthesis or electrochemistry. The low expression levels of the filamentous fungus Agaricus meleagris as well as the demand for engineered PDH make heterologous expression necessary. Recently, Aspergillus species were described to efficiently secrete recombinant PDH. Here, we evaluate recombinant protein production with expression hosts more suitable for genetic engineering. Expression in Escherichia coli resulted in no soluble or active PDH. Heterologous expression in the methylotrophic yeast Pichia pastoris was investigated using two different signal sequences as well as a codon-optimized sequence. A 96-well plate activity screening for transformants of all constructs was established and the best expressing clone was used for large-scale production in 50-L scale, which gave a volumetric yield of 223 mg Lâ1 PDH or 1,330 UâLâ1 dâ1 in spaceâtime yield. Purification yielded 13.4 g of pure enzyme representing 95.8% of the initial activity. The hyperglycosylated recombinant enzyme had a 20% lower specific activity than the native enzyme; however, the kinetic properties were essentially identical. This study demonstrates the successful expression of PDH in the eukaryotic host organism P. pastoris paving the way for protein engineering. Additionally, the feasibility of large-scale production of the enzyme with this expression system together with a simplified purification scheme for easy high-yield purification is shown
Intrinsic electron traps in atomic-layer deposited HfO2 insulators
Analysis of photodepopulation of electron traps in HfO2 films grown by atomic layer deposition is shown to provide the trap energy distribution across the entire oxide bandgap. The presence is revealed of two kinds of deep electron traps energetically distributed at around Et â 2.0âeV and Et â 3.0âeV below the oxide conduction band. Comparison of the trapped electron energy distributions in HfO2 layers prepared using different precursors or subjected to thermal treatment suggests that these centers are intrinsic in origin. However, the common assumption that these would implicate O vacancies cannot explain the charging behavior of HfO2, suggesting that alternative defect models should be considered
Discovery and characterization of a new family of lytic polysaccharide monooxygenases
Lytic polysaccharide monooxygenases (LPMOs) are a recently discovered class of enzymes capable of oxidizing recalcitrant polysaccharides. They are attracting considerable attention owing to their potential use in biomass conversion, notably in the production of biofuels. Previous studies have identified two discrete sequence-based families of these enzymes termed AA9 (formerly GH61) and AA10 (formerly CBM33). Here, we report the discovery of a third family of LPMOs. Using a chitin-degrading exemplar from Aspergillus oryzae, we show that the three-dimensional structure of the enzyme shares some features of the previous two classes of LPMOs, including a copper active center featuring the 'histidine brace' active site, but is distinct in terms of its active site details and its EPR spectroscopy. The newly characterized AA11 family expands the LPMO clan, potentially broadening both the range of potential substrates and the types of reactive copper-oxygen species formed at the active site of LPMOs
- âŠ